saws used for sale

- pneumatic swivelling of the saw head - pneumatic workpiece clamping - incl. operating instructions in German - Year of construction 1996 Specifications - Saw blade Ø: 450 mm - Miter range: +/- 45 ° - Connection voltage: 400 V - Dimensions WxHxD: approx. 1050 x 1600 x 1300 mm - Weight: approx. 500 kg

Imet Record 315/350 - Cold Saw - Suitable for cutting metal profiles and solid materials up to 70 kg/mm² - Mitre cuts from 0 degrees to 45 degrees left and right - Quick-release double vise - HSS saw blade - Pedestal with storage cabinet Specification: Cutting Capacity - 0°round: 125 mm - Square: 110 mm - Rectangular: 160 x 90 mm Cutting capacity 45° left: - Round: 105 mm - Square: 90 mm - Rectangular: 80 x 100 mm Cutting capacity 45° right: - Round: 70 mm - Square: 65 mm - Rectangular: 60 x 70 mm Machine data: - Saw blade size: 350 / 32 mm - Saw blade speed: 30 / 60 rpm - Motor power: 1.8 / 2.5 kW - Coolant tank: 40 l - Machine dimensions WxHxD: 770 x 1900 x 1200 mm - Weight: approx. 210 kg

suitable for mitre cuts on one side Cutting range at 90°: approx. 360 mm; flat 430 x 360 mm Cutting range at 45°: approx. 305 mm; Cutting range at 30°: approx. 215 mm Cutting speed 12 - 115 m/min infinitely variable Infinitely variable control of the cutting speed Hydraulic material clamping Hydraulic cutting pressure regulation Chip brush Saw blade 4400 x 32 x 1.1 mm Upper dead center of the saw bar can be selected via adjustable limit switch Connected load approx. 3 kW Incl. coolant device, minimum quantity lubrication, 2 x roller conveyor each approx. 3 m, material stop, Manual, CE Conformity

Max. sawing length: 6,000 mm Max. saw blade diameter: 550 mm Positioning control E 255 with cycles Digital angle display on both units for swivel and tilt Ride-on roller conveyor Minimum quantity spraying device Weight: 2000 kg  ... more information

The ELUMATEC SA 142/36 automatic aluminium cutting saw was manufactured in 2001 by the German brand ELUMATEC. The machine can be used for cutting aluminum profiles and PVC joinery. So far, it has only been used for cutting aluminium profiles. - Surface-specific material feeding (cyclic) via profile lifting system on one level - Single, double or triple feeding via selector switch - Safe material feeding thanks to two horizontal pressure cylinders Cvmmdigqg2 - Large cutting surface for wide profiles Technical parameters of the ELUMATEC SA 142/36 aluminium cutting saw: - saw speed: 2800 rpm. - cutting angle: 90 degrees to 45 degrees at SA 142/36 - cutting angle: 90 degrees at SA 142/36 - power output: 4000 W - Cutting unit feed: adjustable gradually - feed length/stroke : 5 to 730 mm - material transport: transport in step steps, pneumatic - air consumption without sprink ...

Max. saw length: 6,000 mm Max. saw blade diameter: 550 mm Automatic length positioning and angle adjustment via E 355 Digital angle indicators on both units for pan and tilt Travelling roller conveyor Material Pad Minimum Quantity Spraying Device Machine is loaded freely  ... more information

Forte cold circular sawing machine with roll feed. Outfeed table and bundle magazine doesn't exist.  ... more information

TRENNJAEGER Cold circuit saege - see pictures  ... more information

 ... more information

Vertical band aege KOeLLE ST105, table 950/900 mm, v= 15 - 2300 m/min - table must be overhauled - see pictures  ... more information

 ... more information

Metal bandage gemaess picture  ... more information

Band saw, with double feed ... more information

Cutting angle from/to: 90° - 40° Opening width vice: 260 mm Belt speed: 2-stage Band saw blade: 400 x 32 mm Motor power: 0.48 / 0.65 kW Dimensions: 1200 x 420 x 800 mm Weight approx.: 130 kg Equipment: Coolant device without pump  ... more information

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m/min Motor output power S1 100%: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vibration-fre ...

Cutting capacity round / square 90°: 255 mm / 210 x 210 mm 90° flat cutting area: 310 x 210 mm Cutting capacity round / square 45 ° R: 220 mm / 210 x 210 mm Section flat 45 ° r: 220 x 200 mm Cutting capacity round / square 45 ° L: 230 mm / 200 x 200 mm Cutting capacity 45 ° L: flat 230 x 200 mm Cutting capacity round / square 60 ° R: 135 mm / 135 x 135 mm Section flat 60 ° R: 135 x 135 mm Working height: 930 mm Band saw blade dimensions: 2750 x 27 x 0,9 mm Cutting speed: 35 / 70 m / min Coolant pump: 100 W S1 motor power output 100%: 1.5 kW Motor power S6 40%: 2.2 kW Voltage: 400 V Machine dimensions (L x D x H): 2000 x 1250 x 1900 mm Approximate weight: 350 kg Features: -Professional band saw for General workshop use, fitters... -For cutting of hollow profiles and full materials, stainless steel, tool steel,... -Twist-free, heavily dimensioned saw frame mad ...

Cutting range round 90°, tube Ø: 95 mm Cutting area flat 90°, profile: 110 x 65 mm Cutting range approx. 45°, tube Ø: 90 mm Cutting area flat 45°, profile: 85 x 75 mm saw blade Ø: 315 mm Motor power: 1.1 / 1.8 kW Connection: 400 V Weight, approx.: 150 kg Equipment: - Saw blade Ø 315 - Vice with quick clamping - Pole-changeable motor with two speeds - Separate coolant pump with its own tank - Material stop - Roller block on the feed side -Underframe -CE

Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Table size: 500 x 400 mm Stepless cutting speed: 20 - 90 m/min Band saw blade length: 2840 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 0.75 kW Weight, approx.: 250 kg Scope of delivery: - Band saw blade - Stepless cutting speed - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Parallel fence -CE

elumatec Double Mitre Saw DG104 Year of construction: 1995 Control: E255 Saw blade diameter 420 mm Saw blade bore 30 mm Cutting length 6000 mm Tilt range 45 + 90° Inward swivel range 90 - 22.5° Saw blade speed 2800 rpm. Smallest cutting length 335 mm Power 2 x 4000 W  ... more information

Article number: 19-03-036 Manufacturer: Pehaka Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1976 L x W x H: approx. 1400x800x1900mm Weight: approx. 650kg Saw blade length: approx. 4400-4500mm Saw band width: approx. 6-35mm Max. installation height: approx. 300mm Projection: approx. 600mm Drive power: approx. 3.0kW Accessories  2 pieces of bandsaw blades Other accessories on request Price and other technical data on request