used Circular Cold Saws for sale

Key data: 750 mm

Kaltenbach, HCM 750, Cutting area: dia. 220mm, U/I beam : 400 x 150 , Feed rate: 0- 500mm/min , Drive motor: 5HP, 1700kg, sgt. Condition.

saw blade diameter: 800 x 800 x 1500 mmcutting diameter: 200 mmstroke: 150 mmdimensions of the machine ca.: mtotal power requirement: 3 kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 350 mm, 90 mm, 220 mm

Cold circular saw as shown. Fully functional. Was used in maintenance until the end.

dimensions of saw-blade: Ø 320-350 x 3.0 mmcutting range: 120 mmcapacity 90 degrees: square: 100 x 100 mmcapacity 90 degrees: flat: 170 x 100 mmcapacity 45 degrees: round: 120 mmcapacity 45 degrees: flat: 120 x 100 mmcapacity 45 degrees: square: 95 x 95 mmcapacity 60 degrees: round: RE 100 mmcapacity 60 degrees: flat: RE 85 x 100 mmcapacity 60 degrees: square: RE 85 x 85 mmwork height max.: ca. 925 mmsaw blade turning speeds: 17 + 34 U/mincompressed air: 6.0 - 8.0 barengine output: 1400 / 2800 U/min.total power requirement: 2.0 / 2.6 kWweight: 340 kgrange L-W-H: 1010 x 765 x 2175 mm Machine from a vocational school (NL) Well-maintained condition ()Features:- Semi-automatic vertical cold circular saw- Pneumatic quick-action material clamping device- Continuously adjustable sawblade feed- Convenient miter adjustment with fixed stops- Convenient saw unit stroke adjustment via clamping leve ...

Key data: 400 mm

Machine in good condition with sliding table Operational with suction device

saw blade diameter: 350 mmcapacity 90 degrees: round: 115 mmcapacity 90 degrees: square: 95 mm: 180 x 95 mmWorking height: 940 mmsaw blade turning speeds: 15-30-45-90 U/mintotal power requirement: 3,15 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 1,1 x 2,1 mElectro-pneumatic, linear-guided sawing machine- Feed roller conveyor 1500mm- Micro spraying device- good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref.Nr. 00847 Name of the system Used robust cold circular saw Manufacturer: Kaltenbach Model KKS 400 H Year of manufacture 1985 Research: Saw blade diameter diameter: 400mm Cutting diameter: approx. 130mm Stroke: 150mm Total power: 1.8/2.7 kW Weight: 850kg Dimensions approx. 1205 x 1005 x 1705mm Cutting range 90 degrees square 120x120mm Cutting area 90 degrees flat 315x40mm Cutting speed: 10-40m/min Operating Voltage 380V 3~/50Hz Submission date immediately

saw blade diameter: 315 mmcutting diameter: 90 mmstroke: mmturning speeds: 40/80 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 650 Kgdimensions of the machine ca.: 0,9 x 0,8 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm

– Saw blade 400 mm – Double mitre – Material clamp – Material depot –Cap –Documentation – 400V

saw blade diameter: 370x32x3 mm: 15-150 U/minvice: 190 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 180x100 mm: 115 mm: 90 mm: 90x90 mm: 115 mm: 100 mm: 120x100 mm: 115 mm: 100 mm: 120x100 mmtotal power requirement: 5,5 kWweight: 615 kgOverall size: 1400x1400x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 280 mm, 100 mm, 120 mm

- Cutting Ø: 100 mm - Saw blade dimensions: 280 mm - Speed range: 10, 20, 40, 80 rpm - Cutting area 90° flat: 120 x 100 mm - Cutting range 90° round: 100 mm - Length stop: 500 mm - Total power: 1.5 kW - Machine weight: 700 kg - Condition: good Details Semi-automatic, electric stop, autom. Sawing cycle, pneumatic clamping, prepared for pneumatically controlled feeding Accessories 18 saw blades, roller conveyor 2 m

saw blade diameter: 300 mmcutting diameter: 102 mmcapacity 45 degrees: round: 95 mmcutting range rectangle: 140 x 65 mmCapacy 45°: rectangle: 90 x 70 m/min.turning speed range:: 33 + 66 UpMtotal power requirement: 1,1 / 2,0 kWweight of the machine ca.: ca. 200 kgdimensions of the machine ca.: 0,57 x 1,04 x 1,83 mCondition: good: Electric 380 Volt: Base unit: rollbar Double-parallel-clamping stick: Cooling equipment: Electric 380 Volt: Member of the association of German machine tools dealers FDM and machinedealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1. Qty. 1 Second-hand circular knife scissors Mfc.: Schmitz Dim.: 650 x 1.5 mm Including tools 2. Qty. 1 Second-hand circular knife scissors Mfc.: Schmitz Dim.: 520 x 1.5 mm Including gearbox – Mfc. Bauer 3. Qty. 1 Second-hand circular knife scissors – excenter Mfc.: Julius Dim.: 650 x 1.5 mm Without tools! 4. Qty. 1 Second-hand guillotine shears Mfc.: Wieger , W. Theis Type: SW8/80 Dim.: 3475 x 60 x 8 mm - L x W x T One set of tools! 5. Several second-hand pillar jib cranes 10 T C-Hook Holding dim.: 650 mm

saw blade diameter: 275 mmcutting diameter: 80 mmstroke: mmturning speeds: 58 U/mintotal power requirement: 0,5 kWweight of the machine ca.: 70 Kgdimensions of the machine ca.: 0,5 x 0,5 x 0,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 360 mm

Specifications: Saw blade diameter or dimension 360mm Bore 50mm Mitre cuts up to 45° possible Stop with scale right 2500mm Cutting Areas 90° double T and U-profile 200 x 90 mm 45° double-T and U-profile 140 x 90 mm 90° round steel 120 mm 45° round steel 100 mm 90° square steel 110 mm Bz0turliee 45° square steel 95 mm 90° flat bar 200 x 90 mm 45° flat bar 120 x 90 mm pole-switchable motor --additional speeds by belt reversal Saw blade speeds 17/32-20/40-25/50 m/min Year of construction estimated--no nameplate available--

saw blade diameter: 315 mmcutting diameter: 95 mmcutting capacity - round: bei 90° / 95 mmcutting capacity - square: 95 x 95 mmcutting capacity - round: bei 45° / mmcutting capacity flat: 140 x 80 mmcutting capacity - square: 45° / mmsaw blade speeds: 33/60 p. min.Drive: 1,3/1,8 kWweight of the machine ca.: 300 kgdimensions of the machine ca.: 700 x 1000 x 2050 mmCondition: ready for operation: Video available on our website: Electric 400 Volt: Cooling equipment: Semiautomatic: Function as follows: 1. clambing material. 2-hand start: material sawing, 3. material ease. 4. Sawing unit goes back in starting position. Cooling equipment in the base, pneumatic high-speed tensioning arrangement workpiece, durable transmission, vertical guidance in dove tail guidance, mitre cuts of 45° left to 60° right, spare saw blade. Machine ready to be demonstrated - very good condition.For an addi ...

Key data: 350 mm, 115 mm

Speeds 15, 30, 45, 90 rpm Swivel -45 to +60 ° Cutting capacity - rectangle 180 x 95 mm Cutting capacity - Round 115 mm Cutting performance - square 95 mm Cutting range at 45 degrees: approx. 110 mm Total power requirement 3.1 kW Machine weight approx. 375 Kg Space requirement approx. 0.9 x 1.1 x 1.9 m

saw blade diameter: 450 mmcutting diameter: 150 mmcapacity 90 degrees: flat: 330 x 40 mmcapacity 45 degrees: round: 140 mmcapacity 45 degrees: flat: 250 x 40 mmcutting speed: 10 - 70 m/minsaw head feed: 0 - 1000 mm/minsawing motor: 1,7 / 2,6 kWweight of the machine ca.: 1,1 tAccessories: used sawblade 450 mmø, material feeder M 45 NC für autom. run, ingoing roller track 7000 mm, outgoing roller track 4000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

– Saw blade 400 mm – Double mitre – 4 pneumatic clamps – Hydrocheck system – Automatic protective cover – Fog lubrication system – 1 roller conveyor 300 cm – 1 roller conveyor 300 cm with length stop – Blowgun –Documentation – 400V

saw blade diameter: 370 mmcutting diameter: 120 mmstroke: 370 x 32 x 3 mmControl: total power requirement: 5,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice

saw blade diameter: 400 mmcutting diameter: 130 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 220 x 80 mmfeed length: 600 mmfeed length: multiple: 1800 mmcutting speed: 10/13/15/20/26/30 m/minmitre joint cuts -/+ degrees: 60 total power requirement: 5,5 kWweight of the machine ca.: 1,8 tdimensions of machine L x W x H: 2,45 x 1,20 x 2,00 m- mitre cutting +/- 60 ° with DRO -Accessories: new sawblade 400 mmø, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking

saw blade diameter: 250 mmcapacity 90 degrees: round: 80 mmsaw blade turning speeds: 2 stufig total power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 2,1 x 0,8 x 1,7 mPrecision circular saw machine- high cutting performance and cutting accuracy- clean, chatter-free cut- unusually long service life of the circular saw blades- easy to operate- feed and discharge length 2000mm eachThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition

capacity: Ø 10 - 75 mmsawing motor: 11 kWhydraulic motor: 3 kWSaw Feeding Servo: 1,5 KW SiemensMaterial Feeding Motor: 1,5 KW SiemensSaw speed: 70-160 rpm /minsaw-blade dia.: Ø285 x 2,0 x 1,7 x 32 mmcutting range min.: 1000 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 2950x6800 mweight of the machine ca.: 3500 kgGERD WOLFF GLS-75High-performance circular sawFrom 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease.Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length measuring system L-40NC suitable for Kaltenbach circular saw KKS 450 (please request KKS 450 separately) Directly from the customer used from CH-Oberrohrdorf available.

saw blade diameter: 350 mmcutting diameter: 120 mmcapacity 90 degrees: square: 110 x 110 mmcapacity 90 degrees: flat: 140 x 110 mmcapacity 45 degrees: flat: 140 x 90 mmtotal power requirement: 2,6 kWweight of the machine ca.: 0,5 tdimensions of machine L x W x H: 0,95 x 1,38 x 1,85 mAccessories: 1 used sawblade 350 mmø, coolant- with hydr. clamping of workpiece and hydr. feed of sawblade -The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting range round 90°, tube Ø: 95 mm Cutting area flat 90°, profile: 110 x 65 mm Cutting range approx. 45°, tube Ø: 90 mm Cutting area flat 45°, profile: 85 x 75 mm saw blade Ø: 315 mm Motor power: 1.1 / 1.8 kW Connection: 400 V Weight, approx.: 150 kg Equipment: - Saw blade Ø 315 - Vice with quick clamping - Pole-changeable motor with two speeds - Separate coolant pump with its own tank - Material stop - Roller block on the feed side -Underframe -CE

saw blade diameter: mmcutting diameter: mmstroke: mmturning speeds: 10/20 U/minengine: 380 V / 12 A total power requirement: kWweight of the machine ca.: 1-100 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...

saw blade diameter: 350 mmType of input current: dreiphasig mitter cutting - all-position: -45 bis + 60 °Max. sawing capacity: 95 x 95 mmweight of the machine ca.: ca. 480 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made

saw blade diameter: 350 mmdimensions of saw-blade: 350 x 32 x 2,5 mmcutting diameter: 115 mmstroke: 100 mmcapacity 90 degrees: square: 95 mmcapacity 90 degrees: flat: 180 x 95 mmcapacity 45 degrees: round: rechts & links 110 mmcapacity 45 degrees: square: rechts & links 95 mmcapacity 45 degrees: flat: rechts & links 125 x 95 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 90 x 95 mmcutting speed: 15 - 90 m/mintotal power requirement: 2,6 kWweight of the machine ca.: 375 kgdimensions of the machine ca.: 1000 x 950 x 1800 mm-The powerful, 2-stage gear was specially designed for cuts in solid materialdesigned-The user has a total of 4 blade speeds for optimal adjustmentthe material available-The large bearing rotary table with internal table clamping andPrecision stops at 0/45/60° ensure quick adjustabilitymiter cuts-The vice with quick clamp ...

Used cold circular saw Internal machine number m3331 Manufacturer Kaltenbach Type TL 500 Ma.Number 14238 Year of construction unknown Weight: approx. 350 kg Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out under power. We will be happy to send you further photos by e-mail. A forklift/crane for loading is available. Prior sale is reserved. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as e.B. technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with transfer of risk to the buyer, this also applies to a shipment on our part, which we have carried out ...

saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 150 mmcutting speed: 30 - 130 m/mintotal power requirement: 1,5 / 2,6 kWweight of the machine ca.: 0,55 tdimensions: 1,2 x 0,8 x 1,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade Ø: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangle: 305 x 40 mm Cutting range in miter at 45° round: 130 mm Cutting area in miter at 45° rectangle: 245 x 40 mm Cutting speed: 10/20 m/min Drive motor: 380 V, 1.7/2.6 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg

saw blade diameter: 400 mmcapacity 90 degrees: round: 135 mmcapacity 90 degrees: square: 130 mm: 200 x 80 mmsaw blade turning speeds: U/mintotal power requirement: kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,0 x 1,8 x 1,95 mAutomatic circular saw with- Feed roller conveyor 1500- Roller conveyor with stop 1000mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: Aluminum circular saw machine Manufacturer: KALTENBACH Model: TL 200 Condition: good Offer type: used machine Specifications: Cutting range: Ø 55 mm, Leaf Ø: 200 mm Drive type: el./mech. Drive: 0,75 kW, 400 V Remark: portable Weight: 50 kg The machine is in a good and immediately ready for use condition and can be visited and demonstrated with us. We would be pleased if our offer finds your interest. Errors, changes and prior sale excepted.

saw blade diameter: 350 x 32 mmcutting diameter: 115 mmstroke: -- mmcapacity 90 degrees: square: 95 mmcapacity 90 degrees: flat: 180 x 95 mmcapacity 45 degrees: round: li. 110 / re. 110 mmcapacity 45 degrees: square: li. 95 / re. 95 mmcapacity 45 degrees: flat: li. 125x95 / re . 125x95 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: square: 90 mmcapacity 60 degrees: flat: 90 x 90 mmtotal power requirement: 1,8 / 2,5 kWweight of the machine ca.: 375 tdimensions of the machine ca.: 700 x 900 x 1800 m-The powerful, 2-stage gear was specially designed for cuts in solid materialdesigned-The user has a total of 4 blade speeds for optimal adjustmentthe material available-The large bearing rotary table with internal table clamping andPrecision stops at 0/45/60° ensure quick adjustabilitymiter cuts-The vice with quick clamping (optional is a pneumatic oneVise = MA, available) is with scr ...

Saw motor for Kaltenbach saw KKS 400 Engine was newly stored and front bearing plate renewed. Has been used as a replacement in maintenance. Motor repaired thus as new.

: 65 mm: 50 mm: 83 mm: 82 mmrest piece length: 40 mm: 6 mmdimensions of saw-blade: 250 x 2 x 1.7 x 32 mmspeed: 50-200 m/minengine output: 7,5 kW: 200 mm/sec.work height max.: 845 mmdimensions: 2225x1950x1980 mmweight of the machine ca.: 2500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TUGRA ALU-KALTKREISSAEGE TYPE AC-400 - Zaagblad 400 mm - Dubbel verstek - 4 pneumatic clamps - Nevelsmeerssysteem - 1 roller baan 300 cm - 1 roller baan 300 cm met lengteaanslag - Blaaspistool - Beschermkap - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

saw blade diameter: 400 mmcapacity 90 degrees: round: 135 mmcapacity 90 degrees: square: 130 mm: 200 x 80 mmsaw blade turning speeds: U/mintotal power requirement: kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,0 x 1,8 x 1,95 mAutomatic circular saw with- Feed type RB 1500- Roller conveyor 1500mmGood conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OZCELIK ALU-KALTKREISSAEGE TYPE METEOR I 500 - Half-automaat - Zaagblad 500 mm - Dubbel vertek - 4 pneumatic clamps - Nevelsmeerssysteem - Roller baan 300 cm met lengteaanslag - Blaaspistool - Beschermkap - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

saw blade diameter: 400 mmcutting diameter: 140 mmcapacity 90 degrees: flat: 210 x 120 mmcapacity 90 degrees: square: 140 mmcapacity 45 degrees: flat: 145 x 120 mmcapacity 45 degrees: round: 120 mmcapacity 45 degrees: square: 120 mmturning speeds: 1 - 98 U/min.total power requirement: 2,8 kWweight: 0,75 kgrange L-W-H: 0,9 x 1,0 x 2,0 mmCold circular saw incl.- Miter up to 60°- Micro spray device- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UWM KALTKREISSAEGE TYPE 315 â Zaagblad 315/350 mm - Dubbel vertek - 2 Snelheden - Koeling - Beschermkap - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

saw blade diameter: 320 - 350 mmcutting diameter: 120 mmturning speeds: 16 / 25 U/mintotal power requirement: 2,0 kWweight of the machine ca.: 1,36 tdimensions: 1,0 x 0,8 x 1,8 mCold circular saw with- 45 degree miter- coolant system- incl. 3 saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting range 90°, round: x 64 mm Saw blade: 250 x 2.5 mm Engine power: 1.5 kW Connection: 400 V Weight, approx.: 110 kg Standard: - Saw blade of 250 x 2.5 mm - Base - CE

dimensions of saw-blade: 315 mmcutting range: ~ 105 mmcapacity 90 degrees: square: ~ 95 x 95 mmcapacity 45 degrees: round: ~ 100 mmwork height max.: 900 mmsaw blade turning speeds: 20 / 40 U/minengine output: 1400 / 2800 U/min.total power requirement: 1.1 kWweight: 175 kgrange L-W-H: 550 x 950 x 1800 mmEquipment:- manual crosscut/cold circular saw- for cutting profiles, pipes, solid materials- manual vice with star grip- including miter adjustment- ergonomic control handle- pole-changing drive motor- machine base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.