other machines and plants used for sale

37 kW, 10 bar, new mineral oil and oil separator.

Oil-free. Water cooled. Variable speed drive. Volume flow 5.94 - 13.92 m3/min at 7.0 bar. New LP and HP air ends in 2012 and have 25000 working hours. Engine had been overhaulded.

132 kW, 11.5 bar, with Sigma control.

2 x Atlas Copco refrigerant dryer FD1600WFS 96 m3/min

Oil-free. Water cooled. Variable speed drive. Volume flow 22.0 79.6 m3/min.

Oil-free. Water cooled. 8.6 bar

Hours: 37.0000 YOM: 2009 Oil-free. Water cooled. Variable speed drive. Volume flow 22.0 79.6 m3/min.

10 bar, 100 m3/min. Adsorption dryer, water cooled. In condition as taken out of operation. Test run not possible and fully functionality can not be guaranteed.

Oil-free, air-cooled, scroll compressor with refrigerant dryer. Zero working hours. Machine unused - new! Machine available because of purchase mistake!

Refrigerant dryer Kaeser TG 301 FE 16 bar, 30,8 m3/min, Refrigerant R 404a.

Basket size LxWxH:550 x 300 x 350 mmNo. of washing chambers:1 No. Of tanks for washing:1 Temperature for washing water:60 °CUltrasonic cleaning unit with high alloybasket- Ultrasonic frequency 28 kHz- automatic breakdown for heating and ultrasonic for low level water

Basket size LxWxH:800 x 500 x 400 mmMax. basket weight:250 kgNo. of washing chambers:1 No. Of tanks for washing:1 Electrical heating power:7,5 kWRated power supply:8 kVAMachine size LxWxH:1,5 x 1,15 x 0,9 mUltrasonic cleaning machine with 28 or 40 khz generator

Basket size LxWxH: 900 x 500 x 450 mmMax. basket weight:300 kgNo. of washing chambers:2 No. Of tanks for washing:2 Electrical heating power:24 kWRated power supply:30 KWtank capacity:250 / 180 lCapacity:140/120 LMachine size LxWxH:1,9 x 1,5 x 2,7 mCleaning device with 3 steps and basket dia. of 900 mmPLC control, tank exhauster pump

DIMENSIONS / WEIGHTS:. - total weight approx.:150 kg

table-size:900 x 600 mmthree-axis-real value indicator: EDM Walter axis stroke (X,Y,Z):400 x 600 x 180 mmworkpiece weight:max. 650 kg

mobile finest oil filtering technology, newTechnical oils serve just one purpose: It should run smoothly.After all, a machine downtime costs you time and money.Our filter technology was developed in order to optimizemachine running times.Ultra-fine filter technology ? for the sake of your machinesIn order to achieve a high level of purity we offer theappropriate technology for the different oils and applicationareas:- in order to achieve the best purity class- under the aspect of economyFinest filter technologyOur systems maintain the oil of your machines so that thenecessary oil purity is secured:- Ultra fine filtration of technical oils up to 1µm- Extremely long service life of the filters with up to 2.000 hours- High capacity to absorb water with up to 5 liters- Before starting up- Mobile for maintenance intervals on several machines- In the oil circuit during runtime operationtechni ...

mobile finest oil filtering technology, newThe mobile ultra fine filter system M 130 is the flagship among the mobile filter systems. Equipped with a scalper, a (washable) pre-filter for coarse impurities (up to 5 µm, for example swarf), and two C-1000 housings, this system leaves nothing to be desired in order to process technical oils, water-/ oil- or oil-/water emulsions to excellent purities.The scalper and the pre-filter increase the life service of your systems and the filter elements significantly due to the two-stage pre-filtration. This is followed by the oil processing with the reliable ultra fine filter elements which are also used in space travel. You achieve purity values up to NAS 1 (ISO 4406: 13/10/7) and bettertechnical data M 130flow oil: bis 1.050, 1.500, o. 2.100 liter/hourdimensions: height: ca. 1.175 mm, width: 585 mm, depth: 811 mmweight: ca. 93 kgPlease, contact  ...

power capacity:2x 5,5 kWfeed pressure:16 barliter capacity:2 x 585 l /minReceiver capacity:750 ltotal power requirement:380 V,50 Hz,11,2A, 2x5,5 kWweight of the machine ca.:940 kgdimensions of the machine ca.:3000 x 900 x 1650 mm

feed pressure:8 bar:Verd. 5050 min /1voltage:400 Vrated current:90 Atotal power requirement:46,5 kWweight of the machine ca.:1320 tdimensions of the machine ca.:1800 x 1600 x 2300 mmfrequency:50 HzEffizienz::7,4 m3/minIP::54 / 20

power capacity:110 kWfeed pressure:10 barNumber of working hours:11 372 / Lastst. 7436 hvolume capacity:16,75 m³/mintotal power requirement:110 kWweight of the machine ca.:2,3 tdimensions of the machine ca.:2400 x 1630 x1820 mm

Torque: 0,1 Nm 0Temperature range: 0-60 °CThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3 standing tanks, each with a capacity of approx. 40,000 l D= 2.95 m, tank height with 5 feet in total 6.48 m single-walled, non-insulated without tank agitator, with tank vent and man's cover mounted at the top Tank walk-through platform as a straight walkway

Almost New ASCO MINI Drum Screen Machine Demonstration machine

18x Used Trotec TTV 4500 fan and x14 DF 400 AX dehumidifier - Not for sale in the Benelux These professional used Trotec units are ideal for demanding applications such as construction drying and water damage repair. The TTV 4500 is also stackable and the air volume can be adjusted in three settings. This fan has an air flow of 5300 m³/h. Connection voltage 230 V / 50 Hz, cable length: 3 m. Dimensions 358 x 515 x 520 mm (LxWxH), weight: 14.5 kg Trotec DF 400 AX dehumidifier. Ideal for construction drying, water damage repair and other demanding tasks. Recommended room size for drying buildings: 190 m² or 470 m³. Maximum dehumidification capacity: 75 l/24 hours 65 l/24 hours at 30 °C/80% r.v. 30 l/24 hours at 20°C/60% r.v. Dimensions: 480 x 525 x 820 mm (LxWxH) Why choose HOSBV? We are not only the largest specialist in used refrigeration equipment in Europe, but al ...

Computer Servo Control Universal Testing Standard Spec: Machine Capacity: 5kN . Unit (Selectable) : kg, lb, N, kN . Load Resolution / Accuracy : 1/1,000,000 / within ±0.25% . Load Magnifying Rate: Auto range . Stroke : 1100mm (excluding grips) . Effective Width : 410mm . Test Speed : 0.001 to 1000 mm/min . Speed Accuracy : ±0.5% . Stroke Resolution : 0.00004mm . Sampling Rate : 10,000 times / sec . Motor: AC Servo Motor . Driving system: Multi-groove 50% less in silent and vibration as compre gear (old system) . Power : 1 phase, AC 240V, 15A Features: - High Accuracy - High Performance - Multi-function - Superior Software Program - Automatically Measuring The Elongation - Superior Features - Control: Load, Position and Extension control - Over-load protection, automatic load calibration - Sample failure detector, return function - Manual positioning with tes ...

A CNC glass cutting table Bottero including A-frames is available. 1) CNC cutting table Bottero BCM, year of manufacture: 1992. 2) A-frame for glass, length: 5200mm, width: 1200mm, height: 3200mm, support surface: 350mm. Documentation available. On-site inspection is possible.