paper converting: other used for sale

Size: 1200 x 2800 mmEquipments:8-12 weeks after orderingCondition New machine2 year guarantee + installation

Equipments:Delivery 6-8 weeks after orderingCondition New machine2 year guarantee + installationProduction capacity: 80-320 pcs/minSuitable Material: 200-600g/m2 card paper, PE coated paper, kraft paper, corrugated paperLength: 100-450 mm, degree: 5°- 40°Width: 100-400 mmHeight: 15-200 mmTotal Power: 6.5 kWTotal Weight: 2.4T Overall Dimension: 3600 x 1800 x 1700 mm

Size: 1800 mmEquipments:8-12 weeks after ordering2 year guarantee + installationCondition New machineKMK WJ Series High Speed 2/3/5/7 Layer Corrugation LineFull servo slitter scorer machine Double layer NC cut off machineHydraulic mill roll stand 280/320 Single facer

Size: 450 x 1650 mmEquipments:2 year guarantee + installationCondition New machine6-8 weeks after ordering

Size: min. 250 x 340 mm - max. 620 x 800 mmEquipments:Condition New machine6-8 weeks after orderingFeeding Unit 1 year guarantee + installationConveying UnitDie-cutting and Stamping UnitDriving and Transmission Unittouch-control Delivery unit Electric control unit

Size: 550 x 550 mm 1510 x 1100 mmEquipments:6-8 weeks after ordering2 year guarantee + installationCondition New machineDie cutting style: Flat to flatMax. paper size: 1510 x 1100 mmMin. paper size: 550 x 550 mm Max. Die-cutting size: 1500 x 1100 mmMax. Die-cutting pressure: 350 TPaper processed cardboard: 1-9 mmMax. Die-cutting speed: 4500 sheets/hMax. feeding pile height: 1400 mmMax. delivery pile height: 1200 mmMain motor power: 11 kW Total power: 17 kWWeight: 17.8 TDimensions: 6300 x 4500 x 2500 mm

Size: 1060 x 770 mm 450 x 370 mmEquipments:8-12 weeks after ordering2 year guarantee + installationCondition New machineMax. sheet size: 1060x770mmMin. sheet size: 450x370mmMax.die cutting size: 1050x750mmMax.stamping size : 1050x750mmGripper margin: 8-17mmPaper range: 90-2000g/m2(cardboard) 0.1-2mm(cardboard) =4mm(corrugated) Maximum cutting force: 300 TMax. mechanical speed: 7500 s/hMax.stamping speed: 6500 s/hFoil pulling shafts,longitudinal 3,transversal 2Zones individually heated: 12 heating zones ( each zone can be adjusted independently, max 200Max. foil longitudinal diameter: 250mmMax.delivery pile height: 1200mmMax.feeding pile height : 1350mmMain motor power: 11 kWMachine power: 46kwMachine weight: 17000kgAir requirements: 0.6Mpa, >0.37m3/minOverall machine dimensions: 6050x4200x2260mm

Size: max 1600 x 1100 mm. min. 600 x 520 mmEquipments:maximum speed up to 6750 sheets per hourSerco feeder MKBF 50x65 C1600Cautomatic vacuum feederBobst Flexo 160 with 5 printing units with vacuum transports sections5 colors with vacuum sectionsnew electrical part compliant with EC certified EC standardsautomatic adjustments with memories and job recall4 bottom printing units with chamber doctor blades automatic washing systemUV dryerIR dryer5 Colorsvacuum transport unit at the delivery after the 5-colors

Size: min. 260 x 250 mm max 780 x 1040 mmEquipments:6-8 weeks after ordering2 year guarantee + installationCondition New machineAutomatic FeederPre-piled paper mechanism, non - stop paper feeding device (cycle paper feeding)Feeder: Suction nozzle of feeder head is 1150 mm from the groundStacker: Paper out roll of the stacker is 890 mm from the ground heightPowder removal mechanism electric heating powder removal mechanismLaminating UnitCutting unit

-Plate bender OML model KRH 90 with pneumatic and electric system for Heidelberg SM/CD 74/102

Year of construction 1992 4 drilling spindles with automatic table movement Adjustable drill spindle spacing Adjustable drill speed Adjustable table lifting speed electr. Foot switch Mobile substructure Price on request. We supply and install worldwide.

Manufacturer: 3DGENCE Model: INDUSTRY F340 Year of Manufacture: 2021 Type of Machine : 3D Printers Print Heads: 2 Working Area: 260 × 300 × 340 mm Operating Hours: 4320 (as of today) Max Power Consumption: 2.7 kW Input Power: 230V ~50-60Hz H/W Specification: 2.0 Weight: ~130 kg Find more here - / Contact us at -

We are offering a Xerox Nuvera 314 with 2 paper cassettes, 2 printing units and a stacker Manufacturer: Xerox Model: Nuvera 314 Year of Manufacture: 2016 Meter reading approx. 20 million Find more here - / Contact us at -

Manufacturer: Windmöller & Hölscher Model/Type: Novoflex / Central Cylinder Machine Year of Manufacture: 2002 Performance & Specifications: - Maximum Mechanical Speed: 400 m/min - Average Production Speed: 250 m/min - Average Production Output: 15,000 m/h Material & Printing Capacities: - Maximum Material Width: 1,320 mm - Maximum Printing/Working Width: 1,260 mm - Printing Width with Corona Treatment: 1,320 mm - Minimum Printing/Working Width: Not available - Maximum Sleeve Width: 1,270 mm Cylinder & Roll Specifications: - Minimum Cylinder Circumference: 370 mm - Maximum Cylinder Circumference: 760 mm - Maximum Roll Outer Diameter (Unwinding): 800 mm - Maximum Roll Outer Diameter (Rewinding): 1,000 mm - Maximum Roll Weight (Rewinding): 1,000 kg - Core Inner Diameter (Unwinding): 152 mm or 76 mm Additional Features: - Corona Pre-Treatment System: Yes, Manufacturer: AFS - Numb ...

Manufacturer: Heidelberg Model: Speedmaster CX 102 1c+Lackwerk Dispersion and UV Printing Technical Data Printing Substrates - Maximum Sheet Size: 720 × 1020 mm (28.35 × 40.16 in) - Minimum Sheet Size: 340 × 480 mm (13.39 × 18.90 in) - Minimum Sheet Size with Side Stripping Device in Operation: 380 × 480 mm (14.96 × 18.90 in) - Minimum Sheet Size with Auto Non-Stop Operation at Feeder: 480 × 500 mm (18.90 × 19.69 in) - Minimum Sheet Size with Auto Non-Stop Operation at Delivery: 440 × 600 mm (17.32 × 23.62 in) - Minimum Sheet Size with Auto Non-Stop Operation at Delivery and Side Stripping Device: 480 × 600 mm (18.90 × 23.62 in) - Maximum Printing Area: 710 × 1020 mm (27.95 × 40.16 in) - Maximum Coating Area: 710 × 1020 mm (27.95 × 40.16 in) - Gripper Margin (varies by substrate thickness): - For thickness < 0.8 mm: 10 - 12 mm (0.39 - 0.47 in) - For thickness > 0.8  ...

Manufacturer: HP Model: 2700W (HP Latex Series) Year of Manufacture: 2024 - Total prints under 5000m2 - Dual roll kit option - Free fall kit option - Condition is very good Find more here - / Contact us at -

- Grooving and perforating machine - Standardmachine - with the existing accessories

- Banding machine - desk model

Manufacturer:MÜLLER MARTINI Year of Manufacture: 2008 Model : Tigra perfect binder with Gathering machine 1571 and Esprit trimmer Type of Machine: Binding Machine Machine Specifications - Mechanical Speed: 1000 - 3600 cycles per hour Book Size (Untrimmed) - Book Spine Length (A): - Max: 370 mm (14 ½") - Min: 120 mm (4 ¾") - Book Width (B): - Max: 285 mm (11 ¼") - Min: 100 mm (4") - Book Thickness (C): - Max: 40 mm (1 ½") - Min: 3 mm (⅛") Cover Open Dimensions - Spine Length: - Max: 380 mm (15") - Min: 120 mm (4 ¾") - Book Width: - Max: 620 mm (24 ½") - Min: 203 mm (8") Raceway Clearance of Infeed - 60 mm (2 ⅜") Power Consumption - Basic Equipment: 14.4 kW - Pre-melter 22 liters (45 lbs.) for Spine Gluing Unit: 4.2 kW - Pre-melter 4.5 liters (10 lbs.) for Side Gluing Unit: 0.9 kW - Laydown Device: 0.4 kW Air Requirements - Hotmelt Air-Blow: - 45.0 Nm³/h at 0.6  ...

The 2021 Roboze Argo 500 is an industrial-grade 3D printer designed for high-performance polymer and composite material printing. It features a heated chamber up to 180°C, enabling precise printing of materials like PEEK, ULTEM™, and Carbon PEEK, making it ideal for aerospace, automotive, and medical applications. With 600 x 500 x 500 mm build volume and advanced beltless technology, the Argo 500 ensures high accuracy, repeatability, and superior mechanical properties. Its automated calibration and material drying system enhance reliability and part quality. The machine currently located in its original packaging and ready for shipment. Find more here - / Contact us at -

HOT FOIL STAMPING HEIDELBERG GTK -Max paper size 32x46 cms. with honeycomb in full size -Complete with ink unit and rollers - 2002 FTP Plurimetal hot foil system with electronic control of the steps and distances -One frame, plates and accessories -In our warehouse, available immediately

Year of manufacture 1980 Wire Stitching Machine 1 stitching head electr. Drive electr. Foot switch Price on request. We supply and install worldwide.

CTP Platesetter Presstec Dimension Excel AAG02471-0509-6038 REV B Sep 05 23.693 Plates Presstec plate stacker xxxx ” PAT suction unit UF-02 UF-270 Aug 05 Control computer Harlequin Rip Find more here - / Contact us at -

-Folder gluer for extra small boxes -Straight line gluing with one wheel glue point -Max width: 45 cms. -Max speed: 250 m/min. -Minimum box format is width 15 mm x depth 15 mm -Total length: 7,30 meters x 1 meter -All parts and many accessories, spare belts -Delivery pressing unit -Available immediately

PAAL channel baler type Pacomat III-65D, Inclined conveyor belt - Year 2018, - Fully automatic cutting edge – channel baler with horizontal tying, - 65 ton press force, - Filling opening 1600x1200mm, - Incl. cutting edge free kicker, wire reel systems for large wire reels, - Wire breakage control and mechanical key security system, - Incl. service platform with secured access, - Drop shaft switch, manual opening and closing, without control, - Inclined conveyor belt 1700 mm usable width, approx. 12.5 m length, - With chain belt conveyor

The Xerox iGen 150 Press is a high-performance digital printing press designed for commercial and industrial printing environments. It is known for its productivity, versatility, and print quality, making it a popular choice for print service providers. Key Specifications: - Print Speed: 150 pages per minute (ppm) - Monthly Duty Cycle: Up to 4.8 million pages - Print Resolution: 2400 x 2400 dpi for sharp image quality - Paper Handling: - Max Sheet Size: 364 x 660 mm (14.33" x 26") - Stock Weights: 60 to 350 gsm - Supports coated and uncoated stocks, textured papers, and synthetic materials - Color Management: Integrated with Xerox Automated Color Quality Suite (ACQS) for consistent, accurate color reproduction - Variable Data Printing (VDP): Ideal for personalized marketing materials Features and Benefits: - Productivity: High-speed digital press suitable for large-volume printing wi ...

• 1 x Kolbus Compact Flow Line BF 523 – Compact 2000 (year 1991) size range – standard : max. 365 x 270 x 70mm , min. 125 x 100 x 4mm, capacity: max. 45 cycles/min • 1 x Kolbus book forming and pressing machine FE 601 (upgraded to BF 524) type FE 2000 size range – standard : max. 370 x 300 x 80mm , min. 100 x 100 x 6mm, capacity: max. 47 cycles/min • 1 x Kolbus compensating stacker DS 390 (year 1992) capacity : 50 cycle/min

Manufacturer: RYOBI Model: 3304H Year of Manufacture: 1997 Type of Machine: Offset Press Power Supply: Three Phase Frequency: 50 Hz Voltage: 200V~ Power Consumption: 4 kW Weight: 3000 kg Drive Motor: 5.5 kW (7 HP) Pump Motor: 0.75 kW (1 HP) / 0.4 kW (1/2 HP) Current: 14A Certification: CE Find more here - / Contact us at -

Manufacturer: Grafik Model: HOTFB330V2 Year of Manufacture: 2014 Type of Machine: Stamping machine roll-to-roll Voltage: 3x400V+N Frequency: 50-60 Hz Min. Short Circuit Current: 0.3 kA Max. Short Circuit Current: 10 kA Find more here - / Contact us at -

Manufacturer: MAN Roland Model: R304 Year of Manufacture: 2000 Find more here - / Contact us at -