beverage machines used for sale

50,000 litre milk tank/ agitator tank made of V2A Cat No.: 25-0150EUBA Condition: Used Volume 50000 L Material V2A (AISI 304) 1.4301 Total height 7200 mm Diameter 3300 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Manufacturer: Holvrieka Built in 1972 Topsoil: Inclined cone base 2 crane eyes Level measurement sensor Ventilators Tank cylinder: Manhole 500 x 400 mm Agitator mixer - side with propeller Subsoil: Flat bottom with 2% slope Outlet bag DN 100 Sensor for level measurement

55,000 litre milk tank/ agitator tank made of V2A Cat No.: 25-0151EUBA Condition: Used Volume 55000 L Material V2A (AISI 304) 1.4301 Overall height 8400 mm Cylinder height 6000 mm Diameter 3400 mm Number of feet 3 Surface marbled on the outside Surface inside 2B=IIIC ground Agitator Erwin Stelzer Warburg Agitator Technology Topsoil: Clapper bottom Level measurement with sleeve 3/4" Side stick agitator mixer with 2 propeller stages Dome with manhole Ø DN 300 Tank cylinder: Manhole Subsoil: Clapper bottom Sensor for level measurement 3 half-shell feet with base plate Fixed Technical data stick mixer: Manufacturer: Erwin Stelzer Warburg Rührwerktechnik Engine type: DRK 7.127 6.0 kW 8.0 hp 390/660 volts 18.2/10.5 Amp. 0.68cosφ 450 r.p.m. 50 Per. Operating Mode: S1 Agitator shaft: 6,870 Prope ...

90,000 liter storage tank/ wine tank made of V2A, vertical with flat bottom Volume 90000 L Total height 9200 mm Cylinder height 9000 mm Diameter 3600 mm Material V2A (AISI 304) 1.4301 Vertical design Previous use: Wine storage Topsoil: 2 crane eyes Folding dome DN400 with welded-in threaded nozzle NW50 front Threaded socket NW50 in the middle Sprinkler ring made of stainless steel Cylinder: Manhole swivel 340 x 440 mm Threaded Connector NW50 for Clear Drain Threaded neck NW50 for agitator 2 sleeves 1" Subsoil: Flat bottom with approx. 3% slope to the outlet and upper flat bottom with slope for ventilation Outlet nozzle NW100 On square slab 365 x 365 m

16,830 litre RIEGER mash agitator tank with paddle agitator/agitator agitator, upright, V2A Properties: Volume 16830 L Manufacturer: RIEGER Material V2A (AISI 304) 1.4301 Surface marbled on the outside Surface inside 2B=IIIC ground Total height 6000 mm Cylinder height 3002 mm Outer diameter 2700 mm Inner diameter 2500 mm Agitator Paddle Stirrer Vertical design Number of feet 4 on frame Last Use Food Year of construction 2016 Max. operating temperature 50 °C Max. density 1100 kg/m³ Tank topstock: Clapper bottom Crane eyelets Gearbox and engine Filling flange on the side Front dome with manhole with threaded nozzle DN50 Cylinder: Ladder hook at the top Manhole 440 x 340 mm oval Ladder hook under the manhole Paddle agitator Tank underbody: Cone base Clear drain with disc valve Window forward-drawn residual drain pipe with flange and ball valve 4  ...

16,830 litre RIEGER mash agitator tank with paddle agitator/agitator agitator, upright, V2A Properties: Volume 16830 L Manufacturer: RIEGER Material V2A (AISI 304) 1.4301 Surface marbled on the outside Surface inside 2B=IIIC ground Total height 6000 mm Cylinder height 3002 mm Outer diameter 2700 mm Inner diameter 2500 mm Agitator Paddle Stirrer Vertical design Number of feet 4 on frame Last Use Food Year of construction 2016 Max. operating temperature 50 °C Max. density 1100 kg/m³ Tank topstock: Clapper bottom Crane eyelets Gearbox and engine Filling flange on the side Front dome with manhole with threaded nozzle DN50 Cylinder: Ladder hook at the top Manhole 440 x 340 mm oval Ladder hook under the manhole Paddle agitator Tank underbody: Cone base Clear drain with disc valve Window forward-drawn residual drain pipe with flange and ball valve 4  ...

Tank crest: Airlock DN50 Front: Clapper bottom Manhole 350x450 mm oval Tasting tap Nozzle Flap Size 37 DN100 forward-drawn outlet surround with DN32 disc valve Properties: Volume;: 2100 L Material: V2A (AISI 304) 1.4301 Design: horizontal Last Use: Food Length: 1750 mm Cylinder length: 1000 mm Diameter: 1400 mm Surface inside: 2B=IIIC ground Surface outside: 2B=IIIC ground Important: Tanks are without a base. On request base or feet in V2A - for an extra charge.

Separator IMMA Type 430 NX Description: MJ UNI-MEER Specifications: Manufacturer: IMMA Type: 430 NX Year of Make: 1989 Machine number: 5009904 Drum speed: 5000 rpm Inner drum diameter 535 mm Maximum permissible spec. Weight of the centrifugal material: 1.2

2,830 litres 8 bar pressure tank/ champagne pressure tank/ storage tank/ round, horizontal made of V2A Description: MJ UNI-MEER Tank crest: Threaded connection DN24 Front: Clapper bottom Manhole 400 x 300 mm Tasting tap Clear drain with angled seat valve DW32 Residual drain DW32 with disc valve Properties: Volume: 2830 L Material: V2A (AISI 304) 1.4301 Manufacturer: Ludwig Edel KG Design: horizontal Last Use: Food Technical Documentation: Yes Year of Make: 1968 Length: 2450 mm Cylinder length: 1700 mm Diameter: 1300 mm Surface inside: 2B=IIIC ground Surface outside: 2B=IIIC ground Important: Tanks are without a base. On request base or feet in V2A - for an extra charge.

MJ UNI-MEER                           Volume: 11850 L Material: V2A (AISI 304) 1.4301 Manufacturer: Rieger Design: cubic Number of feet: 4 Total height: 2500 mm Length: 5250 mm Width: 1450 mm Exterior surface: marbled Surface inside: IIID Last Use: Food Topsoil: Flat bottom 1 reinforcement profile in the middle 4 crane eyes Airlock DN50 Cylinder: 4 cool pockets on the side Level indicator with bar and scale Manhole oval Tasting tap Nozzle Flap Size 37 Ladder hooks Sewage drain DN50 with angled seat valve   Subsoil: Flat bottom with 3% slope forward-drawn outlet surround with disc valve DN50 4 profile feet with domes – height-adjustable  4 reinforcement profiles

We offer used as it is where it is: SUNTEST XXL+ FD Atlas SUNTEST XXL+FD is an extra-large light stability test chamber : Information provided by the manufacturer on its webpage without guarantee: Light stability testing of Consumer Goods and Packaging The Atlas SUNTEST XXL+FD is an extra-large light stability test chamber especially tailored towards the needs of consumer goods, food and beverage testing. Its 3000 cm2 flatbed exposure area and tall chamber height is best-in-class for 3-D specimens testing and can accommodate all types of bottles and packaging. The SUNTEST XXL+FD is used to determine the light stability of new ingredients, products or packaging for food, beverages, or other FMCG (fast moving consumer goods) applications. It’s also extremely useful to perform highly accelerated shelf-life tests (ASLT) within days. A powerful chiller guar ...

Used Automatic Rotary Labeling Machine BRB GLOBUS 4200 bph The Used Automatic Rotary Labeling Machine BRB GLOBUS 4200 bph model MEGA ADE 633 CCW applies self adhesive labels to glass bottles with precision Moreover BRB GLOBUS manufactured this machine in 2009 ensuring it operates at 4200 bottles per hour bph It remains fully functional and ready for installation in a production line Structural and Dimensional Features The Used Automatic Rotary Labeling Machine BRB GLOBUS 4200 bph measures 2550 mm in length 1800 mm in width and 2050 mm in height with a net weight of 1800 kg Additionally its mechanical structure provides stability and precision during the labeling process The machine rotates clockwise which optimizes workflow in industrial production lines Furthermore the movement system operates using mechanical cams allowing precise control over bottle movement throughout the labeling pr ...

Overview  The Filling Line is located at a Spanish dairy and has so far filled dairy products into 1.0l and 1.5l containers made of PE-HD. The Filler has a capacity of 10,800 bph. The line is still installed and can be visited.  Machines overview  Bottle unscrambler Erecting of bottles before feeding into filler Manufacturer: LANFRANCHI Model: L2SR 14-1  Year of manufacture: 2008 Empty bottle turner Cleaning before filling by means of food grade air  Manufacturer: SIPAC Model: SPC281 Year of manufacture: 2008 Filling machine  Separation of the bottles, Filling of the bottles, Sealing of the bottle by heat, Ejection of bottles with wrong filling weight Manufacturer: SERAC Model: R36T36/1620 Year of construction: 2007 Aluminum cap punch  Punching of aluminum caps from metal tape rolls Manufacturer: Fords  Model: 320 MD Press  Year of manufacture: 2007 Leak tester  Testing the ...

Overview  This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is out production and be viewed in person in our warehouse. Techn. Details Capacity:  6,000 bph Min/ Max: 3,000 bph – 6,300 bp Bottle type: 0,5L, Euro, NRW, incl. Set of parts for 330ml vichy bottle Bottles per row: 12 Bottles in the machine: 1,080 Bottle cell carriers: 96 Dimensions:  Length: 6,000 mm Width: 1,545 mm Height: 2,175 mm (without feet) Weight: approx. 5,800 kg Water consumption: 3,6 m³/h Heat consumption 80°C: 480 kJ/ h x 1000 Electrical consumption: 11 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Machine body fully in stainless steel All hot zones with 5cm insulation Label extraction belt Heat exchanger in stainless steel for low pressure steam 116°C-120°C at 0,7 - 1 bar Self cleaning spray tubes in stainless steel

Overview  This filler-labeler bloc was manufactured in 2011 by Kosme. The bloc is designed for filling carbonated and non-carbonated beverages in 0.5L glass bottles. It includes an isobaric filler with integrated crowner and a rotary labeller with two cold glue stations. The machine is currently available promptly, and further information is available upon request. Technical data  Capacity: 5,000 bottles per hour Formats: 0.5L glass bottles Bottle diameter: 45–105 mm Bottle height: 150–350 mm Filling system: Isobaric 28 filling valves 6-head crowner Labelling system: Rotary labeller 2 cold glue stations (type N24 4-4-180) Label positions: Body and back Label length: 50–178 mm Steel glue roller Mechanical table cam Scope of Delivery  Filler with 28 isobaric filling valves Crowner with 6 heads Rotary labeller with 2 cold glue stations Integrated bloc design (L-R direction)

Overview This Solo Screw Capper was manufactured in 1994 by French company Zalkin. The machine was used to apply plastic caps on 75cl cider glass bottles with a capacity of up to 9,000 bottles per hour. It is immediately available as the production at the previous facility was stopped in 2022. The cap hopper pneumatic system is included. Technical data  Capacity: up to 9,000 bph Formats: 75cl cider glass bottles Dimensions: L.220 cm x W.150 cm x H.320 cm Scope of Delivery  Zalkin CA6 Solo Screw Capper Cap hopper with pneumatic system

Overview  This Wirehooder was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale, as the production in the factory was stopped in 2022. The platforms for the operator are included. Technical data  Capacity: 9,000 bph to 12,000 bph Formats: Cork caps for cider and champagne glass bottles (75cl) Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Scope of Delivery  Wirehooder Operator platforms

Overview Cold storage cell with floor insulation Technical data  Temperature range: -1°C to -20 °C  Dimensions (width x depth x height): 7,40m x 15,80m x 3,23m Insulation panel: 100mm | 0,23Wm/ K  Non-slip, waterproof, food safe floor Incl. LED lighting + mounting bracket

Overview The tray packer was built in 2015 by Italian manufacturer Atlanta. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 15 trays per minute Specifications: Currently entry on single lane Full set of new parts for entry on double lane included in supply For carton thickness: 2 to 5 mm Flap closes from the bottom Current configuration:                        for bottles PET 0.25L & 0.50L 4 packs/tray in 3x4 for 0.25L bottles 4 packs/tray in 2x3 for 0.50L bottles in carton neutral or printed Machine control: Siemens S7 touch screen Machine equipped with entry & exit conveyors

Overview  The Wild Goose Dual Lane EVO - EU 10 filling line is an automated can filling machine. The line features automatic lid placement, a CO₂ purge station and patented sealing and capping systems to reduce oxygen ingress.  Technical details  Output: 100 cans/min  Dimensions: 3317 mm length x 1041 mm width x 2769 mm height (height 2286 mm without lid tubes) Weight: approx. 635 kg Electrical power: Three-phase, 200V-240V, 18A at 208VAC, 50/60 Hz Compressed air requirement: Clean, dry compressed air at 6.2 bar and 650 l/min; requires air dryer and coalescence filter Lid placement: Automatic, with intelligent lid detection system Filling station: Automatic CO₂ flushing and filling

Overview This Haloila Octopus 1850T automatic ring wrapper was manufactured in 2021 and enables efficient and automated pallet packaging. With a maximum output of 150 pallets per hour, the machine is suitable for various pallet formats. Technical details Max. Output: 150 pallets/h Processed pallet formats: Euro pallet Industrial pallet CP1 pallet Equipment: Fully automatic EASY LOAD cover sheet feeder Scissor hold-down device - with drive Film lacing device Cover sheet length measurement Also available: Roller conveyor

Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  space requirement approx. 9x5 m²  weight: 4,5 t  Operating hours: 19.935   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).

Overview  This shrink packer SMI LSK45P was built in 2003 by Italian manufacturer SMI. The machine is immediately available, as the production in the factory was stopped. Until latest, the machine was in running condition and in operation. Initially it also had a carton magazine, but this is not available with the machine. Technical Details  Capacity: approx. 45 packs/minute (nominal) PET bottles 0.5l and 1.5l in shrink packs, printed film Machine protection: Sliding doors Shrink tunnel: ST 3000

Overview  This packaging system was last used for repalletizing Euro pallets onto smaller pallets. It consists of a palletizer and a wrapper and enables efficient and automated packaging of goods. The system is still in operation and can be viewed in person at any time. Machine list  Wrapper | Haloila | Octopus 1850T | 2021 Automatic ring wrapper Max. Output: 150 pallets/h Last processed pallet formats: Euro pallet Industrial pallet CP1 pallet Equipment: Fully automatic EASY LOAD cover sheet feeder Scissor hold-down device - with drive Film lacing device Cover sheet length measurement Protective device Additionally available: Roller conveyor Palletizer | CHM | MPR | 2015 Last driven capacity: 3-4 pallets/h (low speed due to the distance for manual order picking between palletizer and wrapper) Equipment: Feeding of empty pallets (80x60, 93x80) Empty pallet magazine Feeding of empty pall ...

Overview  The machine was built in 1999 by the German manufacturer Anker and is overhauled. The machine has run only a few hours a year and is therefore in good condition.  Technical data  Front label (belly+ chest wet glue), back label (wet glue) Running direction: right - left  Complete documentation  With a new bottle format and 2 new label formats  Freely selectable label dimensions

Overview  The blowing machine was manufactured by Sidel in 2004 and has only been used by a mineral water company. The machine has been regularly maintained and is in good condition. The seller bought a bigger machine, therefor this machine is available for sale. Technical Details  Capacity: 9,600 bph with 1.5 l and 12,000 bph with 0,5 l Number of cavities: 8 Formats / moulds included: 1,5l Bottle neck: PCO 1881 and 29/25 Additional equipment  Preform kipper Preform hopper Preform feeder

Overview This semiautomatic bag-in-box filler was manufactured in 2015 by Spanish company CARTOBOL. The machine is on sale due to a change of business by the seller. It is currently available and ready for delivery. Technical Data  Formats: 1.5L to 20L bags Voltage: 220 V Pressure: Min. 6 bars Execution: Stainless steel Functions: Automatic uncapping and capping Air vacuum and nitrogen injection system CE certified Compatible with various taps, valves, and caps Nitrogen tank included Scope of Delivery  ECOFILL PROBOX semiautomatic filler Integrated nitrogen tank Complete documentation

Overview  This semi-automatic filling and capping machine was manufactured in 2005 by the Italian company Officine Pesce. It was previously used in wine production and is now for sale due to lack of use. Technical data  Manufacturer: Officine Pesce S.n.c. Model: PG 97/M4 Year: 2005 Voltage: 220V Frequency: 50Hz Filling system: Semi-automatic Components: Accumulation tank Filling tap Electromechanical valve Bottle-holding plates Capping unit Control panel Pedal-operated mechanism

Overview The Triblock consists of a rinser, filler and capper and was manufactured by Sasib/Sarcmi in 1993. It is an isobaric machine for the production of still and sparkling water or CSD. Techn. Details Capacity: 22.000 bph Worked formats: PET 0,45l & 0,66l Cap type: PCO 1881 plastic screw Number of rinser stations: 90 Number of filling stations: 90 Number of capping stations (AROL capper): 15 Rinsing machine with integrated recirculation system Filling with differential pressure system Filling machine equipped with star clutches with quick format change Capper equipped with quick format change Original mechanical filling valves brand Simonazzi Revamping of electrical panel with Siemens S7 E300 PLC Cap hopper not included

Overview  This complete filling line for cans was installed at the end of 2021 and commissioned in January 2022. All machines - with the exception of the tray packaging machine, which was installed as a second-hand machine - were brand new. The line is still in production until around March and can be viewed in person at any time. Technical details  Output: 3,000 cans per hour Formats: 200 ml slim 250 ml slim 330 ml sleek 330 ml standard 440 ml standard The filler can work with carbonated and non-carbonated beverages and has a nitrogen dosing system Machine list  Semi-automatic depalletizer Twistrinser for rinsing the cans Counter-pressure filling machine | EUROSTAR | CANFILL 9 ONE | 2021 with 9 filling valves and one capping head Nitrogen dosing for filling non-carbonated beverages External shower and drying of the cans after the filler. Bottom-up can turning device Inkjet printer Bl ...

Overview This grinder, type: Laska W 130 was built in 2005 in Austria. The machine will be fully refurbished. We will add new safety grid, outfeed saftey and new cutting tools. Technical Details 130 mm hole plate diameter 1 speed working worm 48 liters hopper capacity Width: 800 mm Depth: 1000 mm Height: 1550 mm Installed power: 7,5 kW Voltage: 380 V, 50 Hz Scope of delivery grinder | LASKA | W 130 | 2005