other machinery for waste disposal and recycling used for sale

GB: 750 mm AA: 1,590 mm Drum diameter: 320 mm 1.5 kW electric drive Magnet: 832 x 526 x 234 mm

Capacity: 56 cbm bolted segment construction with discharge chute with sturdy steel construction

6 spiral augers, total volume: approx. 55 cbm, capacity: approx. 150 cbm/h, drive 3 x 11 kW

Motor power: 55kW, length: 14,900mm, width: 6800mm, height: 4000mm, operational hours counter: 30h.

Motor power: 15.5kW/19.5kW, pressing force: 320kN, spec. pressure: 425kN/m², machine dimensions X/Y/Z: approx. 5700mm/1900mm/1800mm, weight: approx. 6000kg. The machine has a defect due to moisture and should be checked.

With conveyor belt, blower, shredder, screw, drum and screen.

Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h.

Connected load: 15.5kW, weight: 6.8t.

Motor power: 90kW, with control cabinet, the vertical crusher is located in an enclosure.

Min. output: 20t/h, wear plates: 13x Pos. 3, 14x Pos. 9, 20x 325x250mm, 28x 120x160mm, 18x 250x250mm, 23x 150x380mm, with blow bars, jaws, metering channel and 4x set screws with collar.

Pressing force: 30t, filling opening X/Y: 1090mm/600mm, bale weight range cardboard: approx. 280kg-350kg, bale weight range plastic film: approx. 400kg-500kg, bale dimensions X/Y/Z: 1200mm/800mm/1000mm, cycle time: approx. 35s, machine dimensions X/Y/Z: approx. 1750mm/1350mm/2300mm, weight: approx. 1750kg. On-site inspection is possible.

A Stummer bale opener is available for opening compressed fiber bales for subsequent feeding. Output basic PES: approx. 1100kg/h, feed conveyor belt length: 5000mm, machine dimensions X/Y/Z: approx. 3550mm/2400mm/3000mm, weight: approx. 5000kg, operating hours: approx. 10200h. On-site inspection is possible.

Qn: 47l/min, Qv: 2750l/min, Hn: 75mm²/s, Δp: 5bar, P: 1.5kW.

Working width: 1400mm, infeed cross-section X/Y: 1400mm/1600mm, drive: 45kW, 1500rpm, rotor flight circle: 380mm, rotor speed: approx. 105rpm, number of cutting tools: 52, screen design: 12mm perforation, screen diameter: 30mm, hydraulic unit: 2.2kW, 1420rpm. Dimensions X/Y/Z: 2740mm/2270mm/2390mm, weight: approx. 5400kg. Documentation available.

Working width: 1600mm, infeed cross-section X/Y: 1600mm/2300mm, main drive: 75kW, 1500rpm, rotor flight circle: 600mm, rotor speed: approx. 85rpm, number of cutting tools: 42, screen design: perforation 40mm. Dimensions X/Y/Z: 5015mm/2650mm/2935mm, weight: approx. 14000kg. Documentation available.

A wastewater treatment plant based on batch treatment from Antech Gütling (AGW), which was used in the printed circuit board industry (electronics), is available. It consists of a waste water collection station, a batch treatment, a chemical dosing station, a sludge treatment, a post-filtration/pH final control and an exhaust air scrubber. The system treats rinsing water, acidic and alkaline concentrates as well as waste water from the resist developer, resist stripper and solder resist developer areas. The system does not treat solvents, paints, hydraulic oils, used etchings (ammoniacal/acidic), waste water containing chlorite or EDTA-based chemical copper. Capacity: approx. 3m³/h. Documentation is available.

A Big HK 25 press is available. Pressing force: 250kN, dimensions X/Y/Z: approx. 5600mm/1100mm/3900mm, weight: approx. 5000kg.

A Big Komet 12 press is available. Pressing force: 120kN, dimensions X/Y/Z: approx. 4000mm/1100mm/1100mm, weight: approx. 5000kg.

A Mecatex shredder for wool is available. Number of rotor knives: 45, number of fixed knives: 6, number of knife holders: 2, working length: 1000mm, motor power: 37kW, max. production capacity: 1000m²/h. Control cabinet dimensions X/Y/Z: approx. 600mm/420mm/2000mm, control cabinet weight: approx. 80kg. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/2600mm, machine weight: approx. 2500kg, operating hours: approx. 900h. The hydraulics for tilting the hopper are defective. Documentation available. On-site inspection is possible.

Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

Six (6) identical pneumatic knife-gate valves Watergates are available. Housing: stainless steel, valve blade: stainless steel, max. operating pressure: 4bar, medium temperature range: -35°C-120°C, machine length: approx. 1873mm, machine diameter: approx. 382mm, weight: approx. 280kg. Documentation available. On-site inspection is possible.

Motor power: 37kW, rotor diameter: 500mm, rotor width: 790mm, cross-section: approx. 500mm/790mm, stator blades: 2-row, rotor: 6 blades left and right. Including cyclone, pipes, blower, 3 sets of knives and sieves with a diameter of 6mm/8mm/10mm. Grinding capacity: 6 sieve: 150kg/h, 8 sieve: 300kg/h, 10 sieve: 400kg/h. Documentation available. On-site inspection is possible.

A hydraulic, vertical Dixi baler is available. Motor power: 4kW, pressing force: 180kN, pressing time: 12s, cycle time: 22s, filling opening X/Y: 1070mm/620mm, working height: 98mm, bale dimensions X/Y/Z: approx. 1100mm/700mm/800mm, bale weight: approx. 120kg-180kg. Machine dimensions X/Y/Z: approx. 1550mm/950mm/2000mm, weight: approx. 850kg. Documentation available. On-site inspection is possible.

A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible.

A vertical baler for paper and cardboard is available. Motor power: 0.75kW, machine dimensions X/Y/Z: approx. 1200mm/1000mm/2000mm, weight: approx. 1200kg. On-site inspection is possible.

A Schulte and Strehlau channel baling press (Euro-Press) is available. Pressing force: 200kN, feed opening dimensions X/Y: 700mm/675mm, max. throughput: approx. 3000kg/h, drive power: 5.5kW, machine dimensions X/Y/Z: approx. 5300mm/1600mm/2700mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible.

Volume: 400 l // Output Capacity: 900 kg/h

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of Make: 2005 specifications: Conveying width: approx. 1,500 mm Belt run: approx. 3,100 mm horizontally underfloor, then rising below 28° over a length of approx. 6,000 mm, Descending below 10° on the remaining length and conveying into the press Conveyor belt speed: 0.27 m/sec. Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt (quality: EP 200/2 2:1) with lateral 20 mm high T-studs for sealing the be ...

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1750 Year of Make: 2004 specifications: Conveying width: approx. 1,500 mm Belt run: approx. 4,300 mm horizontally underfloor, then increasing over a length of approx. 6,300 mm, Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 1,027 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt with 20 mm high T-studs on the sides to seal the belt stringers, - Belt routing in a neutral zone to avoid stretching tensions, - Chain type M-80 with case-hardened bushings, bolts and roller ...

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of Make: 2009 specifications: Conveying width: approx. 1,500 mm Center distance: approx. 9,625 mm Belt course: approx. 3,000 mm horizontally running underfloor, then rising below 30° over a length of approx. 5,875 mm, sloping below 20° on the remaining length and conveying into the press Conveyor belt drive power: 3.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt with 20 mm high T-studs on the sides to seal the belt stringers,  ...