planing machines used for sale

Inv. Num. : 7406 Type: RISZ 16 Producer: ARTHUR KLINK Created: 1993 Parameters: Theoretical diameter of the tool: 95 mm Max. workpiece height: 300 mm Clamping surface: 400x400 mm Maximum working stroke: 1250 mm Maximum stretching force: 16 t Weight: 6900 kg

Inv. Num. : 6696 Type: Profiset 60 Producer: SCM Created: 2018 Parameters: Number of spindles: 5 Vacuum belt width: 25-230 mm Working height: 6-120 mm Max. speed: 6000 1/min Equipment: Swivel head

SCM Flush-Thickness Planer Model L' Invincibile 2150: - 400mm planer, table length 2150mm - thicknessing planer, manual table lifting Machine not according to CE standards, for export

SPECIFICATIONS: Max. machining width mm: 630 Max. working height mm: 240 Installed power: 7.5 KW Feed speed: 6-18 m/min Roller with 4 blades Voltage: 380 volts Manual operation

SPECIFICATIONS: Working dimensions mm: 3000 x 530 Speed 5000 rpm Number of knives: 04 Installed capacity: KW 5.5

Guiliet Profilier and Hobelautmat with Wepla heads Model: 220 KXR 220 Year built:1990 Condition: very good (used) MAX CROSS-SECTION 220 X 120 MM MIN CROSS-SECTION 30 X 6 MM ENTRANCE TABLE 2000 MM long. PLANING SHAFTS 40 MM Dressing shaft 5.5 kW right and left planing shaft combined 5,5kW Thickness planer shaft 5.5 kW WEIGHT APPROX. 1600 KG Cleaned, maintained and functionally tested. If necessary, we can gladly offer planing heads with continuous cutting edges.

Combined dressing and thickness planer SCM Type FS 41 Machine No. KK/053286 Year of construction 2000 Working width 410 mm Planing height max. 230 mm Total length of tables 1800 mm Task table length 920 mm max. chip removal 4 mm Feed speed 7 m/min. 3 Knife Shaft Tersa Motor power 4 kW Weight 400 kg

Specifications: Planing width: 245 mm Planing depth: 0 - 4 mm Nominal stroke rate: idle 8500 1/min Cutting speed: 32.9 m/s Rated power consumption: 2300 W Weight: 13.2 kg Knife head diameter: 74 mm Universal motor: 230 V / 50 Hz

Used, Year of Construction 2008 Operating time according to hour meter 135 h (0.02 h/day) Offer Felder AD 741 with special accessories from part-time joinery in best condition for sale. This version is one of the last series with the particularly robust 4-spindle height adjustment, which was later converted to a central spindle for cost reasons. In order to prevent possible misunderstandings, an on-site visit is possible by appointment. Delivery is to be ordered by the buyer. Motor power 4 kW direct start with brake and limit switch Planer width 410 mm Total dressing table length 2000 mm Table length feeding dressing table 980 mm Chip removal max. 4 mm - is set and displayed on the right dressing table Swivel dressing fence with anodized ruler 4-Blade Felder System Planer Shaft Thickness planer width 404 mm with automatic E-thickness height adjustment Powerdrive (min. - ma ...

SCM fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

Four-sided planer, model P 22 N, 2 sets of planer heads, reversible knife – strip planer knife, sound protection hood built in 85, Weight approx. 1500 kg Spindles: 4 Working width: 220 mm Working height 120 mm

Four-way planer model P 23, five-shaft machine with groove bed, Shaft arrangement down/right/left/up/down, Number of planer shafts: 5 Planing height max.: 120 mm Planing width max.: 230 mm Dressing table length: 2,000 mm Feed power: 2.2 kW Feed speed: 5 - 24 m/min Speed: 6,000 rpm Spindle diameter: 40 mm Soundproofing hood good neat condition, year of construction 94, extraction distributor

WEINIG high performance planer Type Hydromat 22 BL (full checked!) Built in 1995 With safety hood and soundproofing cabin! Machine specifications: - Planing capacity 220 x 120 mm - Feeding, 8- 80 m/min, motor 18.5 kW Spindle layout: Bottom-right-Links Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared gap unit, consisting of 1 right and 1 left spindle 30 kW each (4500 rpm) incl. table roll, sliding roller, spray indentation and wedge dissipation 4 Roller pull-out Special printing and fittings for the production of top layer slats Feed (divider) for slats and pull-out tape

High-performance industrial planing machine In good condition, lots of accessories '

High-performance planer With chamf device good condition 223 kW Year of construction 2003 Many spare parts

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package

Multi-sided wide planing machine with chamfer unit LEDINEK SUPERLES 300 4V + 4F Planing width (min/max): 70 - 300 mm Planing height (min -max): 19 -300 mm Workpiece length (min): 2,000 mm Feed speeds: up to 230m/min Weight: 13.500 kg

Weinig planing machine Product name: Planing machine Type: AF51 Manufacturer: Weinig Machine number: unknown Year of manufacture: unknown Condition: Used Technical details: - Total table length: 2,600 mm - Feed table: 1,380 mm - Removal table: 1,080 mm - Table height: 810 mm - Chip removal: 0 – max. 8.0 mm - Stop (L x H): 1,250 x 155 mm (obliquely adjustable up to 45° without scaling) - Planing width: 500 mm - 4-knife shaft with 4 strip planing knives - Suction nozzle: 160 mm - Power: approx. 3kW - Weight: approx. 750 kg - 4 knives installed with slight signs of wear - 1 piece Barkomat adjustment gauge - the engine and the knife shafts have been re-mounted - the table lips have been re-milled (approx. 8 mm slots) to reduce the noise level. minimize Machine dimensions/set-up dimensions (L x W x H): 2,600 x 1,350 x 810 mm Transport dimensions (L ...

ready for use m used Pre-dressing table for copper mill planing machines Total length 2600 mm Planing width 240 mm

Four-sided planer copper mill Type: Vuin 605 Planing width 605 mm Planing thickness 3 – 200 mm in the horizontal area Planing thickness at the rear in the vertical area 80 mm Upper and lower planer shafts as 4-knife shafts 4 planer shafts 1. Bottom 5.5 kW 2. Top 7.5 kW 3. Left 4 kW 4. Right 4 kW Shortest piece length, self-continuing: 350 mm Electrically height-adjustable table Width adjustment for the rear planer heads manually via crank 2 feed speeds Suction nozzle diameter 3x120mm, 1x150mm Weight approx. 2700 kg Space requirement L 2350 x W 1400 x H 1800 mm Control cabinet 1200 mm x 420 mm x H 1050 mm