used KÖLLE for sale

Technical details: - Spindle diameter: 400 mm - Max. diameter of milling tool: - Mechanical spindle height adjustment with analogue scale - Foldable rolling table - Rolling table travel max. 1,430 mm - Table length: 800 mm - Table width: 385 mm - with eccentric pressure apparatus - 1 x extraction nozzle milling machine, diameter 160 mm - 1 x suction nozzle saw, diameter 80 mm - Max. diameter of saw blade: 400 mm - Saw blade shaft diameter: 30 mm - 1 x saw blade QW 2020 x 400 x30 mounted - 1 x splitting wedge mounted - 2 x engine brake installed - With aliminium length stop (length 3,000 mm) Engine data milling unit: - Voltage: 400 V - Current: 15 A - Frequency: 50 Hz - Power: 7.5 kW - Speed: 2,850 rpm Engine data sawing unit: - Voltage: 400 V - Current: 4.8 A - Frequency: 50 Hz - Power: 2.2 kW - Speed: 2,760 rpm Dimensions (LxWxH): 2,000 x 1,530 x 1,61 ...

Tenon milling machine / tenon cutting and slitting machine Manufacturer: Kölle Model: Z40 Year of construction: 1992 1 x Sawing 1 x Milling

Vertical band aege KOeLLE ST105, table 950/900 mm, v= 15 - 2300 m/min - table must be overhauled - see pictures

Technical details: - Max. planing width: 500 mm - Maximum chip depth: 5 mm - Length of feed table: 1,300 mm - Length of the take-off table: 1,500 mm - Total length of the table: 2,800 mm - Table height: 800 mm - Max. workpiece length without support: approx. 1.5 m - Length of the joining fence (Aigner joining fence with integrated auxiliary fence): 1,300 mm - Height of the joining stop: 150 mm - Joining stop adjustable up to 45° and extendable over the entire width of the table - Diameter of the TERSA knife shaft: 125 mm - Nominal speed of the TERSA knife shaft: 5,000 rpm - Number of planer blades: 4 pieces - Minimum width of planer blades: 17 mm - Diameter of suction nozzle: 160 mm - Required air velocity: min. 20m/s - Required air volume: 1500 m³/h - Vacuum at 20m/s air velocity: 705 Pa - 6 x machine shoes with adjustment screws - incl. EMERGENCY STOP switch En ...

KÖLLE Z40 YOC 1983 Rated Current: 20A Milling machine: Motor power: 7.5 kW Speed: 4,000 rpm. 40 mm spindle Clamping height: approx. 190 mm Height adjustment via handwheel (travel: 80 mm) Saw: Motor power: 2.2 kW Speed: 3,000 rpm. 30 mm spindle max. saw blade diameter: 400 mm max. cutting height: 120 mm Sliding carriage eccentric. Workpiece clamping Length fence: 290cm can be swivelled on both sides (up to 45°) Suction connection: 160 + 80 mm Engine Brake Weight: approx. 700 kg Stop ruler available. Machine dimensions with folded table as shown: L: 200 cm W: 130 cm H: 161 cm Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

Kölle thickness planer DH 63 Product name: Thickness planer Type: DH 63 Manufacturer: Kölle Machine number: 888 Year of construction: 2000 Condition: used technical details: • Planing width: 630 mm • min. planing height: 4 mm • planing height: 225 mm • Largest chip depth: 8 mm • Length of the thickness table: 1,000 mm • Shortest workpiece length: 260 mm • Diameter of the knife shaft: 125 mm • Speed of the knife shaft: 5,000 rpm • Number of planing knives: 4 pieces • Feed speeds: 4/6/12 m/min • Weight: approx. 1,020 kg • Electronic positioning control e.g. adjustment of the thickness table • Sliding roller in the table Electrical equipment: • Voltage: 400 V • Power knife shaft motor: 7.5 kW • Power feed motor: 0.75 kW • Power motor for thickness table adjustment: 0.18 kW Suction: • Diameter suction nozzle: 160 ...

Koelle edge planing machine model FKF 51 is in good condition, ready to use. L x W x H = 3000 mm x 700 mm x 950 mm Weight approx. 200 kg Built in 1982 Engine No. 390 The rubber rings at the pressure rollers should be times replaced. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

KonturfräÃ?maschine crosscut saw with sliding table Type: FK5 Second-hand machine Sled Spindle diameter 30 mm Speeds: 4 Height adjustment: Handwheel Power: 6kW Circular saw, crosscut saw Machine is fully functional. Machine is in good condition. We love to hear from you.

Manufacturer: Kölle Tischfräse, Type: F 50, Year: 1990, Control: oben, revolutions rpm: 3000/6000/9000, Length lifting spindle mm: 150, Diameter of the spindle mm: 30, Spindle travel range total mm: 120, Spindle swivel-mounted max Grad: no, Main engine kW: ca.4, Feeding speed: yes, Table extension - lenght: yes, Exhaust diameter mm: 150, Wight approx. kg: ca.900, FREE TEXT: Anschlag ausziehbar/Haffner Vorschub, Year :1990