machines and plants for waste disposal and recycling used for sale

used Kleemann 14/45-2. Screening machine Kleemann 14/45-2 Brand: Kleemann Screen area: 4500 x 1400 mm - 2 deckers Drive: electric motor 11 kW Incl.: springs and spring console.

used Westeria AirStar 1000 L2 Air classifier. Westeria AirStar 1000 air classifier, built in 2022, new and unused Specifications: Manufacturer: Westeria Type: AirStar 1000 L2 – 20° Year of Make: 2022 Hours: 0 Connection: 460 V / 60 Hz Throughput: 80-100 m³/h Working width: 1000 mm Length of lightweight chamber: 2970 mm Belt width: 1000 mm Effective width: 822 mm Dimensions: 8869 x 2005 x 2000 mm (LxWxH) Inclusive - Extension of the lightweight chamber L2 - 20° bend - Wiring on terminal box - AirWheel 15 - AirJet Areas of application: Separation of heavy and light goods. Typical areas of application in the recycling / waste management industry include the treatment of household waste, MSW, commercial waste, e.g. for the production of substitute fuels or for pre-sorting for recycling. Note: The machine is in very good, mint condition. It was never used. No  ...

used Haver + Böcker Dewatering screen. Dewatering screen Haver & Böcker Brand: Haver & Böcker Screening area: 4000 x 1400 mm Screen opening: [] 120 x 0.8 mm Propulsion: 2 electric motors of 7.5 kW each

used TiTech AutoSort 2000. 1 piece used separator Manufacturer: TiTech Type Titech AutoSort [NIR1-VIS] [S-2000] [X-H] including acceleration band Conveyor width approx. 2,000 mm AA approx. 5,000 mm

used STADLER / BOA. used sorting system Manufacturer: STADLER / BOA Year of Make: 2016 / ? composed of: - Feed hopper with dosing roller (BOA) - Feed belt with riser part as chain conveyor (BOA) - Climbing belt with horizontal transfer part as chain belt (BOA) - Sorting belt as a sliding belt conveyor belt (STADLER) - Sorting platform with supports, with staircases, 3 bunkers with 4 discharge shafts in the cabin and 2 discharge shafts outside the cabin (STADLER) - Sorting cabin with 4 pieces of entrance/exit doors, heating, cooling and ventilation system (STADLER) - Electrical control (STADLER) - Take-off belt for container filling as a belt conveyor belt (STADLER) - Container filling (BOA) - Electrical control for container filling (BOA) The system will be dismantled from 05.05.2025.

used BPS Recyclinganlagen Bronneberg A400. Used alligator scissors in good condition - Blade length 406 mm - Electric motor 400 V, 4.0 kW - Knife opening max. 250 mm - Cutting capacity up to max 50 mm round bar The scissors have been checked and repaired by us We supply a second, unused knife set for the scissors The machine is immediately available and can be viewed and tested at our premises. More information at infoRecyclinganlagen.info

used Binder BB1400mm. Binder Bunker Conveyor Belt Brand: Binder Length A.A. = 7000 mm, belt width 1400 mm Drive: Slip-on gearbox 11 kW.

used MFL R-CI 100-100. Prall Mühle MFL Type R-CI 100-100 Inlet opening 1020 x 760 mm Power requirement 90 kW electric motor Weight 9 tons

used LINDNER RECYCLINGTECH Jupiter 2200. Overhauled machine, single-shaft shredder LINDNER JUPITER 2200 It is made for the single-stage processing of untreated municipal, industrial and commercial waste into medium-calorific substitute fuels (40 – 120 mm) – the ideal raw material for thermal utilisation in the cement plant's calciner. Lindner Jupiter 2200 Rotor equipped with flat blades. Year of construction 2015 Control cabinet with FU ABB Control panel Drive motors : ABB 2x132 kW Funnel Hydraulic Discharge belt Total weight approx. 32 t Shipping time: immediately

used UNTHA RS-100. Shredder UNTHA RS-100 Main shaft speed: 17.3 rpm Auxiliary shaft speed: 28.0 rpm Chopping discs width: 38 mm Drive power 2x55 kW 400 V, 50 Hz Screen perforation round: Ø 25 mm and 80 mm Total weight without base: approx. 12,000 kg Control cabinet with wiring : complete Incl. funnel + pusher and base frame clean machine, checked, always maintained, 1 owner !

used IMRO IMP V-160 S. Fe separator, overbelt magnet. Overall dimensions with gearbox LxWxH: 2950x1800x550 mm Rubber belt width: 1280 mm Magnetic core dimensions LxWxH: 1580x1150x300 mm Total weight approx. 3500 kg Motor/gearbox: SEW ,power 2.2 kW Machine checked, ready for immediate use Base Available, dimensions approx. LxWxH 3100x2800x6000 mm

used Hazemag APK 1010 (APK 40). Impact mill Hazemag Brand: Hazemag Type: APK 1010 (APK 40) Inlet opening: 1000 x 350 mm

used HB40B compactor. ANNOUNCEMENT – BALER HB 60A Net price: 130,000 PLN Bale dimensions: 920 x 665 x 1200-1600 mm (H x W x L) Motor power: 30 kW Baler dimensions: 2800 x 1500 x 5850 mm Tying system: 4x horizontal Feeding opening: 585 x 1200 mm The HB 60A baler is a reliable and efficient machine, perfect for companies involved in recycling and waste processing. With a powerful motor and an effective tying system, it ensures high performance and ease of operation. Check out other machines available on our website. We offer a wide range of equipment tailored to different needs. Feel free to contact us – we will be happy to provide more details.

used BPS Recyclinganlagen Schomberg ES 60-85. The machine in one is a used twin-shaft shredder. The machine has been used in recent years for pre-shredding old cables. The year of construction of the shredder can no longer be determined. A good 2 years ago, new electric motors and a new control cabinet with a revised control system were installed. The outlet is currently provisionally made of wooden boards, but can also be replaced or adapted by sheet steel if desired. The shredder is available from approx. mid-April 2025. Specifications: Drive: 2 x 15 kW, 400 V Rotor length: 850 mm Shaft spacing: 250mm Knife width: 65 mm Blade torque: 8,600 Nm Filling opening: 1.7 m x 1.2 m Weight, approx. 2,000 kg

used Klanke KBST-110880. Baler Klanke, type KBST-110880, year of construction 2008 Specifications: Manufacturer: Klanke Type: KBST-110880 Year of Make: 2008 Press force: 80 t Drive power: 2 x 30 kW Total connected load: 75.5 kW Capacity: max. 225 cbm/h Bale size: 1,050 x 760 mm, length variable Bale weight: 400-500 kg Binding: 4-fold horizontal, automatic Transport dimensions: 8,585 x 2,210 x 2,800 mm (L x W x H) Weight: 17000 kg Accessories: 8 pieces wire roll holder, bale chute Materials: paper, cardboard, foil, big bags, PET Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without g ...

used SBM Austria RHSM 13/13/4. Impact mill SBM Austria Brand: SBM Austria Type: RHSM 13/13/4 Inlet opening : 1250 x 1100 mm Propulsion : 160 kW electric motor.

used Strautmann Bale Tainer. Strautmann baler, type BaleTainer, press force 60 t, year of construction 2012 - In supply Specifications: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of Make: 2012 Pressing force 60 t Motor power 5.5 kW, 400 V Total connected load 11 kW Filling opening height 1370 mm Filling opening width 1069 mm Bale dimensions 1,100 x 1,100 x 800 mm (WxDx H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with feed: 6,355 x 2,056 x 2,756 mm (LxWxH) Weight approx. 7,050 kg Materials: paper, cardboard, PET bottles, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement.  ...

used HOSOKAWA ALPINE 28/40 RO. Screen size: Ø 4.5 mm Rotor shaft: Ø 280 mm Knife width: 400 mm Knives: 6 rotating knives and 2 stator knives Cross Silhouette Lining: 2 x Ø 100 mm Max. opening approx. 350 x 240 mm Without feeding funnel Rotor speed: 100 – 1000 rpm Motor: LOHER three-phase motor 15 kW, 400/690 V, 50 Hz, 1450 rpm Control: Conventional contactor control with frequency converter and analo-geric display of power consumption; Control cabinet installed on machine frame Electrical connection: 3~, 400 V, 50 Hz, 28.5 kW Connected load: 15 kW Dimensions: 1800 x 850 x 1900 mm (L x W x H) Weight: approx. 700 kg  Granulator mounted on table  Machine cleaned and functional tested

used HERBOLD SMS30/50 H5-3. Screen perforation: Various sieves with perforations from Ø 5 mm to Ø 11 mm Rotor shaft: Ø 300 mm; NOT water-cooled Knife width: 500 mm Blades: 5 rotor and 3 stator blades Feeding hopper: opening 500 x 490 mm Rotor speed: 800 rpm – non-variable Motor: NEW SEVA three-phase motor 45 kW, 400 V, 50 Hz, 1480 1/min - Energy efficiency class IE3 Control: Contactor control with new contactors (motor and emergency shutdown) Power supply: 3~+PE, 400V, 50Hz Accessories: Feed chute and blower for granule extraction Dimensions: Granulator 1,400 x 1,720 x 1,800 mm (L x W x H) Loading chute: 3,000 x 900 x 1,400 mm (L x W x H) Control cabinet: 800 x 450 x 1,000 mm (L x W x H) Weight: approx. 2,600 kg  Various sieve with different perforations available as accessories  Machine is in good condition  Machine has been cleaned, repainted and will be ...

used BIG HK 16. Horizontal baler that is filled via a shaft, either in automatic mode or manually. Bale size width 600mm, height 550mm Tying 2-fold manually, with polyester strapping Feed chute 680mm l x 545 mm w Press pressure 16 tons Motor 3 kW, 380 V Machine length 3,530 mm Width 860 mm Height 1,680 mm Machine weight approx. 1200 kg The machine was overhauled by us

used SCS 600. For Sale: Used SCS600 Scrap Metal Shear Year: 1998 Condition: Used, but recently refurbished Key Features: Powerful Cutting Force: 600 Tons Engine: Fully refurbished Deutz Diesel engine Maintenance: Full service performed, especially on the electronics Mobility: Equipped with a 1-arm hook lift system for easy transportation Additional Information: This SCS600 scrap metal shear, manufactured in 1998, has been meticulously maintained. The powerful 600-ton cutting force makes it ideal for heavy-duty scrap metal processing. The fully refurbished Deutz Diesel engine ensures reliable and efficient operation. The machine's electronics have been thoroughly serviced, guaranteeing optimal performance. The integrated 1-arm hook lift system allows for easy and convenient transportation, making it highly mobile. The machine is available at a ...

used BOTTLE RECYCLER. NEW! BARTONTECH BOTTLE RECYCLER – THE FUTURE OF RECYCLING Discover a modern and eco-friendly solution that revolutionizes the collection of PET bottles and aluminum cans. The Bartontech Bottle Recycler is an innovative device with a built-in compaction function, ensuring higher efficiency, convenience, and cost-effective recycling. MAIN BENEFITS 15 times higher efficiency compared to standard solutions. Impressive capacity – holds between 6,000 and 12,000 bottles and cans, depending on the model. Lower operating costs – less frequent emptying required. Reduced storage space needs – no need for major store adjustments. Lower logistics costs – compactor creates 200-300 kg bales ready for resale. Freestanding design – ideal for outdoor use. Customization options – tailored design and functionality to meet client needs. TECHNICAL  ...

used Presto HPK 50 HS. Presto HPK 50 HS baler, built in 2014 Manufacturer: Presto Type: HPK 50 HS Year of Make: 2014 Drive: 30 KW Press force: 50 t Hours: 3514 Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Materials: paper, cardboard, foil, PET bottles Remark: The press is in good condition. We recommend replacing blades/counter-blades and sliding and guide plastics. The hydraulic hoses are from 2017. These should be replaced together with the filter. The operating instructions and CE declaration are available in digital form. Please note: All technical data refer to the manufacturer' ...

used Presona. Technical specification Conveyor belt width: 1.87 m Length of the vertical part 8.6 m Lifting height: 5.2 m Total length in horizontal view: 26 m Belt depth in the horizontal loading area: 0.55 m Motor power: 7.5 kW + 5.5 kW

used Presona. Technical specification Conveyor belt width: 1.87 m Length of the vertical part 8.6 m Lifting height: 5.2 m Total length in horizontal view: 26 m Belt depth in the horizontal loading area: 0.55 m Motor power: 7.5 kW + 5.5 kW If you have any questions, please call us: +48 696 072 985

used Bomiltech S15-E-EVA-7,5 FoodGrade Conical dewateringpress food grade. 2014 Conical dewatering press S15-E-EVA-7,5 food grade model. Completely revised. History and documentation available. Elektromotor capacity: 7,5kW.

used Hamach Pneumapress 1000. Compressed air press Floor area filling space 650 x 650 mm x height 1,380 mm Pressure 6 bar Press pressure max 1020 kg Machine weight 245 kg Machine height 2,420 mm Abbinduing 2-fold

used press compactor baler. I have a horizontal baler for sale, Hopper 120/180 Beam 110x120x80 Width 190 Height 130 Length 470 Engine 15 kw,

used BPS Recyclinganlagen Tecnoecology T 150 Turbo. Compact but extremely versatile cable recycling plant. The pelletizing plant has both a Z-classifier (Zigzag) for the separation of 1 mm heavy copper and a turbine mill for processing fine cables and data conductors. The system was only fed and used by hand with selected cables. The condition is correspondingly good. Specifications: Suitability: Cables, cut to length without impurities Throughput capacity max. 150 kg/hour Connected load: 19 kW Dimensions (LxWxH): 1.4 m x 0.7 m x 2.3 m Weight: 1,200 kg Further information: infoRecyclinganlagen.info

used BPS Recyclinganlagen JMC McIntyre 407i. The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient blade length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, pipelines, motors, cables or gearbox housings. The shears are also often used for cleaning scrap metal or cutting vehicle radiators. The machine has a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. Using the foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted using simple clamping screws. The scissors are from our demonstration pool and can of course be viewed or tested. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

used Radial Fan. Fan Radial Brand: Radial Drive: 19 kW

used Haver + Böcker HD 12/45-2. Screening machine Haver & Böcker 12/45-2 Type: Heavy Duty Dim. screening machine: 4500 x 1200 mm – 2 deckers. Drive: electric motor 21 kW.

used HAMMEL VB 650 D. engine: diesel engine Cummins B6.7 - Stage 5 (AdBlue) power: approx. 209 kW / 280 hp shafts with 7/7 discs with 5 knives per discs & breaker bar with combs Mobile Hook Lift Frame wheel axle with drawbar hydraulic height adjustment for magnet hydraulic height adjustment for discharge belt water sprinkling system Monitoring Industry 4.0 weight: approx. 20 t

used RCT 600 Side dosing for scrap. used side feeder for foil snippets / scrap Centrifuge with drive and feed container this unit was mounted on a 150 mm extruder Capacity over 320 kg/h

used ATM SPK 100-3. Package Dimensions 400 x 400 Drive power 45 KW The press has done little work. Top condition!

used Westeria WS 1000 Windshifter. Windshifter Westeria Brand: Westeria Type: WS 1000 Infeed belt with A.A. length 3700 mm - belt width 1000 mm Outlet belt with A.A. length 2700 mm - belt width 800 mm Drive: 3 kW Slip-on gearbox Incl.: Fan with 22 kW drive.

used Cyrus 6000-1200 Feed channel. Feed channel Cyrus Brand: Cyrus Length 6000 mm - Width 1200 mm with two vibration motors of 7.5 kW each Incl.: Springs

used Cyrus 2000-800 Feed channel. Feed channel Cyrus Brand: Cyrus Length 2000 mm - Width 800 mm with two vibration motors of 4.7 kW each Incl.: springs.

used Hosokawa Bepex MS300/850. Machine data: Press force: 3,000kN Roller diameter: 850mm Working width: 400mm Briquette dimension: 38 x 32 x 16mm Briquette volume with 4mm gap: approx. 16cm³ Briquette weight: approx. 38g Throughput capacity: 30,000kg/h Rated speed: 17.9/min Circumferential speed: 0.79m/s

used GfA 2PP 6000/2000. Circular vibrating screen Screen area: 6,000 x 2,000 mm Plastic screen coverings on both screen decks Electric drive 22 kW with motor stand