machines and plants for process engineering used for sale

Colloid Mill Manufacturer: Fryma Type: MZ 80/A Factory No.: M13063 Power: 2.2 kW Year of construction: 1987 Working room pressure: 1 bar very good condition with double coat with outlet chute with pressure gauge LBH: 370 x 340 x 760 mm

Manufacturer: Probst & Class (PUC) Type: N/60/S Factory number: 84.016 Power: 2.2 kW with hopper Hopper volume: approx. 20 l LWH: 460 x 330 x 900 mm

Motor 75 kW Rotor blades: 5 Bu9dtai0he Stator blades: 2 Rotor diameter: 600 mm Rotor width 780 mm Inlet opening: 720x780 mm

Stock# U824V-1 Used butterfly type valve by ChemValve (CH) with DIN 300, PN10. Carbon steel design. Contact parts layered with teflon. Valve is operated pneumatically. Valve type PTSGWA1-WD1.

Stock # U824V-2 Used butterfly type valve by EBRO (DE) with DIN 200, PN10/16 CI 150. Carbon steel design. Contact parts layered with teflon. Valve is operated by el motor rated EExdIICT6.

Stock# UG6369 Used stainless steel contact parts decanter centrifuge by Corima (IT) model CA 5.10. Machine has bowl designed in duplex stainless steel, screw and other contact parts designed in 316 stainless steel. Bowl has a diameter 450 mm. Working rotation of the bowl up to 2800 rpm. Hydraulic flow up to 6 m3/h. Machine had been working with reported output up to 1.2 m3/h. Machine is driven by el motor 45 kW, 1480 rpm, 400/690 V, 50 hz. Includes electric cabinet. Machine had been working in food industry. New 2017.

Stock# U2408-1 Used stainless steel conical mixer-dryer by Hosokawa Micron type 3-VDC-22. Total volume 798 l, working volume 300 l. Drying chamber is rated full vacuum. Working temperature up to 80 C. Conical bottom is equipped with heating coil with total volume 46 l, designed for work on pressure 6 bar, at working temperature up to 130 C. Elipsoidal top has inspection manway with diameter 250 mm equipped with bolted lid. Top has heating coil with volume 7,4 l, designed for work on pressure 6 bar, and working temperture up to 130 C. Dryer has stainless steel unsupported mixing screw driven via gearbox and el. motor 1.5 kW. Rotating arm is designed in stainless steel and driven via gearbox and el motor 0.25 kW. All motors are in Ex design (EExeIIT4). Bottom central discharge via outlet with diameter 200 mm and pneumatically operated ball valve. Last time machine had been working in ph ...

Stock# U2408-6 Used stainless steel filter press by Filtrox Novox (CH) type Novox 40/40 (plate & frame). Press has 20 stainless steel plates with dimensions 400 mm x 400 mm and 20 stainless steel frames with internal dimensions 380 mm x 380 mm x 28 mm. Working filtration surface 6,4 m2 and working cake volume 80,8 l. Filter press is mounted on stainless steel mobile frame. Manual closing.

Stock # U2421-1 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 12500 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2550 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) legs carbon steel legs. New 2003. Last time used in chemical production.

Stock# U2416 Used dissolver by Oliver+Batlle S.A.(ES) type DISPERMIX 50 designed for work on vacuum. Machine has non-corrosive shaft with working length 144.5 cm. Shaft is belt driven by el motor 40 kW, 1470 rpm, 380/660 V, 50 hz. Ex design of motor (ExeG). Mechanical adjustment of shaft rotation. Shaft is equipped with stainless steel toothed disc, with diameter 350 mm. Rising and lowering of agitator in range 110 cm and is driven hydraulically. Machine has also lid cover, with diameter 108.5 cm, for work on vacuum, rised and lowered by two hydraulical actuators. Together with mixer there are: - vacuum pump Pfeiffer Vacuum model Hena 200, output up to 240 m3/h, driven by el motor 5.5 kW. - stainless steel mixing pan with volume 500 l. Mounted on 4 leg, no bottom discharge outlet. - local control panel integrated with two hydraulic devices.

Stock # U2436 Used stainless steel lab size double cone powder mixer by ACH-MECH (PL). Total volume of mixing chamber 25 l. Working volume about 12-15 l, with maximal weight of batch up to 16 kg. Contact parts designed in stainless steel AISI 316L. Feeding inlet has diameter 200 mm and is closed with stainless steel lid. Discharge outlet has diameter 80 mm and has manually operated buttlerfly valve. Distance from discharge outlet to bottom support plate 730 mm. Mixer has also manually rised, plexiglass cover, equipped with safety switch. Machine is driven by el motor 1.1 kW, 1415 rpm, 230 /400 V , 50 hz. Working rotation adjustable in range from 4-18 rpm. Machine has local control panel, and is mounted on mobile pedestal, designed in stainless steel AISI 304. Includes technical documentation and CE certificate.

Stock # U2421-3 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) carbon steel legs. New 2003. Last time used in chemical production.

Stock # U2412-2 Used stainless steel contact parts lobe pump by Waukesha Cherryl-Burrel type 130. Pump has output up to 34.1 m3/h (depending on products) and is driven by el motor 7.5 kW with reducer. Working rotation of lobes up to 102 rpm. Working outlet pressure of product up to 13.8 bar. Working rotation of lobes up to 600 rpm. Output per 1 rotation - 0,961 l. Pump has top connection inlet and bottom discharge outlet. Connections diameter: 100 mm. Pump is mounted on 4 stainless steel legs. Motor and reducer are covered with stainless steel housing. Last time pump was working in food industry.

Stock# U2412-3 Unused progressing cavity pump by Allweiler type AEB 1E 200. Pump is driven via Nord gearbox and el motor 2.2 kW, 1445 rpm, 230/400 V, 50 hz. Pump works with rotation up to 150 rpm. Working output depends on product and rotation and can reach from 5 l/min, up to 500 l/min. At current rotation on gearbox pump can reach 60 l/min / 3600 l/h. Mounted on carbon steel base.

Stock # U2412-4 Unused carbon steel progressing cavity pump by Mono (UK) type E11B. Pump has reported output up to 1.5 m3/h. Working pressure up to 1.6 bar. Rotor works with 498 rpm. Inlet and outlet have diameter 50 mm. Pump is driven by el. motor 0.75 kW, 1425 rpm, 220-380 V, 50 hz. Technical documentation in digital form. New 2019. Never used.

Stock# U2415-1 Used stainless steel conical mixer by Hosokawa Milacron model DBXE-300R. Total volume 798 l, working volume 300 l. Mixer has top mounted stainless steel unsupported mixing screw, driven via gearbox and el. motor 2.2 kW. Rotating arm is designed in carbon steel and is driven via gearbox and el motor 0.18 kW. Bottom central discharge via outlet with diameter 200 mm and manually operated slide valve. Machine is mounted on three carbon steel legs and is equipped with local control panel. Last time machine had been working in food industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.

Stock # UG6362 Used fully design in stainless steel 316L chamber bowl type, hi-speed centrifuge made in China, type GQ115. Working rotation of bowl up to 16300 rpm with 17000 G-force. Total volume of bowl is 7 l. Centrifuge has bottom inlet and top discharge outlet. Bowl is belt driven by ele. motor 3 kW, 2880 rpm, 380 V, 50 Hz. Machine is equipped with an electric control panel, tools, concrete pedestal. Overall dimensions: length 900 mm, width 900 mm, height 1600 mm, weight 490 kg.

Stock# U2347-1 Used mixer by Buhler (CH) type SPM-50-HT with butterfly/tri-foil agitator for work on vacuum. Mixer has contact parts designed in non-corrosive steel. Mixing shaft has length about 1750 mm and is equipped with butterfly agitator, with three paddles and external diameter 1040 mm. Top cover is equipped with two pneumatic accutators and fits mixing pans with diameter 1100 mm. Cover can be rised up to 500 mm. Agitator is belt driven by el motor 45 kW, 1470 rpm, 380/660 V, 50 hz. Mixer is hydraulically risen about up to 90 cm. Machine is equipped with local control panel by Siemens with touchpad and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Working pressure in mixing tank can reach 0.3 bar. Machine had been working on paints. Mixing pan is not included.

Stock # U2347-3 Used mixer by Netzsch (DE) type VPI 550 with butterfly/tri-foil agitator. Mixer has contact parts designed in stainless steel. Shaft has a working length 650 mm and is equipped with butterfly agitator, with three paddles and external diameter 1080 mm. Agitator is diven by el. motor 48 kW and is hydraulically risen up to about 130 cm. Machine is equipped with local control pane and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Mixing pan is not included.

Stock# UG6276 Used vertical disc agitator/dissolver by Test SA (PL) type MP-11/1000Ex. Machine can work on 1000 l mixing pans and is equipped with disc agitator. Driven by motor 11 kW, 1440 rpm. Working rotation of agitator adjusted in range from 0-1000 rpm. Mechanical rising and lowering of agitator up to height 1250 mm. Dimensions: H 3180 mm x W 800 mm x L 1200 mm. Ex proof design - ExII2GcIIBT3. Includes technical documentation. New 2014. Mixing pan not included.