grinding machines wood used for sale

Key data: 1100 mm

DMC Polisand 110 RP wide belt sanding machine year 1998 Varnish Wide belt sanding machine total installed power approx, 23 KW Sanding width 1100 mm Workpiece thickness up to approx, 170 mm Motorized height positioning with digital reader Vacuum transport belt, F,LLI FERRARI vacuum unit with motor power 4 KW Feed motor power 1,50 KW Aggregate 1: grooved rubber sanding roller, with blowers Aggregate 2: sanding pad, with blowers Both groups are driven by an 15 KW motor 380 V / 50 Hz weight 2300 Kg Dimensions: 2,45m x 1,85m x 2,0m

Wide belt sander SCM Sandya 40 M1 year of construction 2000 S/N AE/020761 Manufacturer SCM Group S.p.A Italy Sanding width 1.350 mm Workpiece thickness min 4-170mm 1 sanding unit, calibration 250mm diameter Roller hardness °Shore 55 Vacuum table       Main motor 11 kW ( 15 HP) Sanding belt length 2,620 mm Feed max 19 m/min Feed stepless Fixed working height 900 mm Sanding belt blow-off device Electropneumatic segment control Belt change side left SYEL CN 51 control unit Carpet feed with speed controller Electronically controlled sanding belt oscillation Main motor with disc brake Rubber coated pressure rollers Automatic carpet centring Automatic table positioning Air requirement Nl/min 15 Operating voltage 400V/ 50 Hz Total power 40 Amp Dimensions: L x W x H= 1917mm x 2134 x 2365mm Weight approx. 2540 kg

Volpato LVO 120 edge sanding machine SN 1929112 Year of construction 1999 Manufacturer: LASM Volpato Italy Small single-sided sanding centre VOLPATO offers the LVO 120 sanding machine, with a combined function that can make life easier for many professionals in the industry. It was developed under the direction of the company's experienced staff, who are passionate about achieving the best possible result. Vertical oscillating sander 2.2 kW motor (3 HP) Swivelling table 0-90 degrees Work table dim. 880 x 370 mm. Bgdyjyl27C Mechanically swivelling Additional support and ‘round’ sanding discs Belt dimensions 150 x 2580 mm. Suction device Weight 250 kg Overall dimensions: 700 x 1000 x 1150 mm. CE marking

Key data: 1300 mm, 4 , 150 mm

WIDE BELT GRINDING AND CALIBRATION MACHINE Technical details: Working width: 1300 mm Max. workpiece thickness: 150 - . 4.0 mm Sanding belt dimensions: Circumferential mm Machine dimensions LxWxH: 4.8 x 2.7 x 2.35 m Drive 219 kW Year of construction 1992/2004 For woodworking! Other features: - Pneumatic belt guide - Height adjustment by handwheel - EMERGENCY STOP switch - Grinding roller adjustment - Belt tensioner - Roller conveyors (infeed and outfeed per L: 2800 x W: 1700 mm with 6 rollers each) motor-driven - Control panel operation - Workpiece thickness min./max.: 4.0/150mm - Sanding belt belt width 1300 mm (belt circulation) - Sanding belt support lengthxwidth: 1700/1350 mm

total power requirement:0,55 kwOverall size:800 x 900 x 1600 mmWeight:220 kgaccessories::mit Absaugung 0,2 kw

Profile grinding machine Brand Ecoline Type: Profilsand 6 New machine The customized solution for sanding individual parts such as for window profiles or moldings. Flexibility also in the choice of material and surface to be sanded: The Profilsand 6 can process different surfaces (impregnated, primed...) and types of wood (solid wood, veneered parts, MDF, etc.). The machine is equipped according to your specifications. Basic machine - Machine bed made of steel frame to ensure high stability. - Ground and therefore absolutely flat surface of the machine bed. - All movements of the aggregates are carried out on linear guides with recirculating ball bearings to ensure durability, precision and strength. - Feed via a driven conveyor belt. - Adjustable support rollers for supporting the parts between the lower units - Pressure rollers are positioned at the top alo ...

Brushing machine Brand: Ecoline Type: Rustikmat 2-600 New machine - Upper feeding belt with grip, power 0,75 kW frequency controlled. - Controlled lift of feed belt via ball bearing guidances for precision and a long product life. - Manual height adjustment - Additional pneumatical and self-regulating pressure of brushes via lower pressure pistons to process as well slight convex / concave formed surfaces to get an even finish. - Additional verticale and independant adjustment of the bruhes up to 20 mm via regulator to have a similar wear and tear and to change the depth of the structuration (stronger / slighter). - Transmission of the motors via v-belt. That is the cause of the low weight, minimal maintenance work and in relation a high trasmission. Suctiong housing for each brush. - Additional rollers at infeed and outfeed for more supporting space. 2 Brushes More ...

Brushing machine brand: Ecoline Type: Rustikmat 2-1000 New machine 2 brushes More stability due to the lower brush position Length of the brushes 1000 mm; Diameter 270 mm. Power 4 kW per brush. Each brush can rotate in synchronism and counter-rotation. Working width: 1000 mm Working thickness: 120 mm. Workpiece dimensions: Min. length: 350mm Max. Width: 1000mm Max. Thickness: 120mm Electric adjustment of thickness, speed and feed with digital display. Spindle diameter 50 mm. Infinitely variable feed: 0 - 12 m/min. The speed of the brushes and the feed speed are controlled by frequency converters. The heavy machine bed allows deep structuring of the plates.

Brush grinding machine Brand: Ecoline Type: B Sand 5 New machine The B Sand 5 as a high-quality solution for your production. The individual equipment offers many possibilities. In addition to panels and profiled doors, sash surfaces can also be processed, for example. A perfect result for different types of materials and surfaces: - Solid wood, MDF, veneered parts... - impregnated, primed surfaces... Technical data: Workpiece dimensions: Min. length: 550 mm Min. thickness: 10mm Max. Width: 1550 mm Max. Thickness: 120 mm Power: 11 kW Air pressure: 6-8 bar Suction nozzle: 6 x Ø120mm unit - vertical swiveling brushes for grinding the edges. diameter 400mm per brush, 2 motors á 1,1 kW - Horizontal sanding lamellar roller diameter 420mm, length 1600mm, 3 kW motor - Cross brush for sanding the wood fibers diameter 40mm, 1,5 kW motor - 2 round b ...

Code: 0156 Brand: SCM Model: SANDYA UNO CCS Automatic compact 2-belt wide belt sander for furniture, custom-made furnishings, fixtures, doors, panels, composite materials and various Composition: 1° Group: Calibrating roller 2° Group: Combined Rubber Roller / Finishing Pad Automatic table lifting Working width mm 920 Working height mm 3 - 160 Abrasive belt dimensions mm 930 x 1525 Feed belt speed mt/min 4,5/9 Motor power Hp 10 Infeed and outfeed roller conveyors Automatic table positioning Oscillating belts Working pressure Atm 6 Exhaust hood diameter mm 160 Overall dimensions mm 1395 x 1110 x 1600 h Weight kg 1050 Overall dimensions mm 1395 x 1110 x 1600 h Weight kg 1050

Oscillation: ja ja / nein: ja ja/nein: nein ja/neintiltable up to: GradMotor output: 4 kWTable dimensions: 2000 x 1000 mmsanding width: 150 mmWeight: 590 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1100 mmNumber of sanding units: 1 st.Workpiece thickness max.: 150 mmsanding belt measurements: mmMotor roller: 11 kWMotor pad: kWFeed motor: 1,5 kWFeed speed: m/min.Overall size: mmWeight: 2250 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 8 st.sanding width: 150 mmMachine can be inspected during production!Leistomat - Finisch and intermediate leveling machine Löwer LZ 8-------------------------------------------------- -------------------for finish sanding (smoothing, defibering and edge breaking)or intermediate sanding profiled window latch- Finish and intermediate sanding machine with eight sanding blade aggregates,2 surface units at the top (synchronism / counter-rotation)2 surface units below (synchronism / counter-rotation)4 profile units with angled arrangement top right,bottom right, top left, bottom left, all mating- linear guidance of all grinding units overLinear ball bearing sets on hardened shafts- Timed immersion of all in the opposite directionrotating grinding units directly above the incomingWorkpiece edges to avoid looping through thePrimer in the front edge area. By theIt is pos ...

Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Composition: 1° Group - N° 2 adjustable brushes - Motor Hp 4 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Working length min mm 150 Working height min/max mm 10/100 Working width min 50 Protection cabin Electrical cabinet Overall dimensions mm 2700 x 1000 x 1250 h Weight kg 1500

gebr. Edge grinding machine LANGZAUNER LZK 3/3 Built in 1998 Connected load: 2.38 kW Motor power: 2.2 kW Rated current 5.7 A Grinding unit can be continuously swivelled up to 90° Electric oscillation (0.18 kW) Veneer sanding device Belt length: 2,600 mm Belt height: 150 mm Table size: 100 x 35 cm Table height adjustment range: 20 cm Laterally height-adjustable support table (size: 40 x 25 cm) Chassis Feed bracket Suction hoses new Graphite coating of the sanding beam renewed Extraction connection: 140 mm Dimensions: 165 x 90 cm Weight: approx. 300 kg Very good original condition!

Key data: 900 mm

Wide belt sander Anthon Type: CMOWS 90 Order no. 69071879 2-belt machine with roller and shoe Grinding width 900 mm Grinding height 100 mm Sanding belt dimensions 920 mm x 1,900 mm Feed speed 11 and 22 m/min. Abrasive belt drive motor 11 kW Feed motor 1.5 kW Brush motor 0.75 kW Oscillating Shortest pieces to be sanded 400 mm Weight approx. 1,500 kg

Wide belt sander SCM Sandya Uno CS Working width 900mm Working height 3-160mm Number of aggregates 1 Metal-shoe COMBI chiller system 11kw main motor Pneumatic oscillation Sandpaper dimensions 930×1525 Weight 830kg

gebr. Long belt grinding machine JOHANNSEN T94 Super CE version YOC 1995 Total connected load: 4.2 kW / 9.9 A Motor power: 4.0 kW Table size: 278 x 80 cm electr. Table lift Belt dimensions: 150 x 7,800 mm Maximum usable sanding belt length: 260 cm Offset (right): 1,000 x 310 mm 2 sanding pads: 300 + 450 mm Vacuum suction clamping device (pneum. Workpiece clamping) with 4 suction cups incl. vacuum pump Table insert infinitely swivelling Selector switch for clockwise/counterclockwise rotation Integrated lighting Belt blow-out device Table Lock Engine brake Extraction connection: 180 mm Dimensions: 220 x 405 cm Weight: 700 kg Machine dimensions (approx. dimensions) W:405 cm D: 148 cm H: 153 cm

Code: 0114 Brand: SCM MINIMAX Model: UNILEV 150 Universal sanding machine for straight and round parts , furniture, window frames , panels, doors, window frames and various Technical data: Lenght of worktables mm 1440 Tilting worktable 0-45° Motor 3,3 Kw Sanding belt width mm 150 Sanding belt lenght mm 2170 Pneumatically controlled oscillating belt Suction port diameter mm 120 Overall dimensions: mm 1440 x 720 x 1550 h Weight kg 470

Key data: 1350 mm, 1 , 150 mm

gebr. Wide belt sander (1-belt) BÜTFERING CLASSIC 113 C YOC 2001 only 816 h (read operating hours) Total connected load: 17 kW 1 power unit Drive motor: 15 kW Working width: 1,350 mm Sanding belt dimensions: 1,370 x 1,900 mm Workpiece thickness: 3 - 150 mm Electronic control (50 programs) Feed: 2.5 - 13 m/min. (infinitely adjustable) Combined contact roller-grinding shoe unit with abrasive belt grain compensation Steel contact roller (profiled) Electronically controlled link pressure beam (element width: 50 mm) Dust Removal Brush Roller table (infeed + outlet) Engine brake Extraction connection: 200 + 140 mm incl. thickness gauge (0-50 mm) Weight: approx. 2,000 kg Very good gebr. Condition! Few operating hours!

Volpato LS-1NR edge sander with chamfers Working height 10-100mm Aggregate system: Sanding unit 1.5kw Top chamfering unit 1.5kw Bottom chamfering unit 1.5kw Oscillation of the sanding belt mechanically Speed of the phasers adjustable by means of an inverter up to 9900r.p.m Feed speed adjustable by variator 5-30m/min Grinding unit at different angles Sanding belt length 2450x80mm

Universal edge sanderTilting model: horizontal/vertical adjustable sanding beltOscillatingMotor 4 kWSanding belt dimensions: 200 x 3200 mm

Automatic buffing machine for flat panels Table size 4800 x 1400 mm. The machine has got 4 rotating pads mounted on a rotor, speed rotor adjustable Buffing speed bridge adjustable

Top/bottom calibrating line:Bottom sanderNumber of sanding units: 41. Steel roller with motor 55 kW2. Steel roller with motor 45 kW3. Rubber roller with 90 Shore, motor 30 kW4. Rubber roller with 90 Shore, motor 22 kW5. Cleaning brushVariable Feed SpeedVacuum workpiece suctionTop sanderNumber of sanding units: 41. Steel roller with motor 55 kW2. Steel roller with motor 45 kW3. Rubber roller with 90 Shore, motor 30 kW4. Rubber roller with 90 Shore, motor 22 kW5. Cleaning brushVariable Feed SpeedVacuum workpiece suction

1) sander top VEGA 311 MRLSanding width 1100 mm.Working thickness 3 to 160 mmworking height 950 mmSanding belt dimensions 1120 x 2620 mm.Equipment:1) cutterblock diameter 180 mm 22 kW 47m/s2) rubber contact roller diameter 220 mm 22 kW 18m/s3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off4) Finishing brush unit at output 0.75 kW diameter 150 mmfeed speed adjustable 2.5-13 m/min 3 kWpneumatic sanding belt tensionmotor height adjustment 0.75 kWextraction rate: 11800 m²/h2) bottom sanderVEGA U 311 MRFSanding width 1100 mm.Working thickness 3 to 160 mmworking height 920 mmSanding belt dimensions 1120 x 2620 mm.Equipment:1) cutterblock diameter 180 mm 22 kW 47m/s2) rubber contact roller diameter 220 mm 22 kW 18m/s3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off4) Finishing brush unit at output 0.75 kW diameter 150 mmfeed speed adjustable 2.5-13 m/min ...

Usefull width: 1030 mm.Sanding belt sizes: 1060 x 1900 mm.Number of sanding units: 3 Roller 15 kW, Roller 15 kW, Pad 11 kWMax. pass in thickness: 200 mm.Feed speeds: 5 and 10 m/minMotor feedbelt: 2,2 kWPneumatic belt tensioning and oscillationMotorised height adjustment, motor 0,75 kW, readout up to 1/10 mm.Automatic thickness adjustmentrevision in 2017

Top and bottom sanderUsefull width: 435 mm.Sanding units top: Roller 7,5 kW, Pad 5,5 kW bottom : Roller 7,5 kW, Pad 5,5 kWSanding belt sizes: 455 x 1900 mm.Workpiece thickness: 5 - 200 mmMin workpiece length: 320 mm.Feed speed of the carpet: 8 and 16 m/min, motor 2,2 kW

Sanding width: 650 mm.Sanding belt sizes: 650 x 1900 mm.Number of sanding units: 2 Roller 11 kW, Pad 7,5 kWMax. pass in thickness: 200 mm.Feed speeds: 5 and 10 m/minMotor feedbelt: 2,2 kWPneumatic belt tensioning and oscillation

Fine sanding machineWorking width: 1300 mm.Workpiece thickness: 3 - 140 mmN° of units: 2 Crossbelt, CSD sanding pad, belt sizes 4900 x 150 mm, 13/17 kW motor, 12 and 24 m/s belt speed, belt cleaning Wide belt, CSD sanding pad, belt sizes 2620 x 1350 mm, 13/17 kW motor, 10 and 20 m/s belt speed, belt cleaning, first belt guiding roller with excenter adjustment for light calibration Fibre brush 150 mm diameter, 1,5 kWVacuum-feedbelt suction, 7,5 kW fanFeedmotor 3 kW, feedbelt speed 4,5 - 22 m/minMotorised rise and fall of the tablePanel tracers with 16 mm centers

Table sizes: 3000 x 850 mm.Motor: 3 kWBelt sizes: 150 x 7800 mm.Motorised height adjustment