Manufacturer:
(Category: 843)
R25897/18 SCHIAVI laminating machine model: ECO Convert Junior age: 1997 size: 1.350 mm available: short dated Duplex- wet- laminating with solvent-free glue sleeve diameter: 76 mm 1. unwinding max. reel diameter: 1.000 mm core diameter: 76 mm max. reel weight: 1.600 kg web tension: 2- 35 kg 2. unwinding max. reel dimater: 1.000 mm core diameter: 75- 150 mm max. reel weight: 1.600 kg web tension: 2- 20 kg rewinding: max. reel diameter: 1.000 mm core diameter: 76 mm max. reel weight: 1.600 kg web tension: 2- 40 kg Available: kurzfristig
R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately
R26115/18 VITS Impregnating- and coating machine model: IPA / S / II age: 1996 working width: max. 2200 mm, min. 625 mm available: immediately for finishfoil and edges heating thermal oil 250 ° dryer control 80 - 220 ° impregnating unit coating unit rewinding with thermal oil boiler material: decor paper and similar papers 30 - 240 g/m² Available: sofort
in 2013 refurbishedStill in operation: YesAvailable: immediately
540 x 950 mm Stack feeder Bow trowel at the jetty Cellophanier System SPOT Lamination Machines control 2 reel seats Box display
AUTOMATIC LAMINATOR B&F MECCANICA DRY -Year 2004, High pile -Min paper thickness 110 grms/Sqm- Max 350/400 grms/Sqm -Max mechanical speed: 100 m/min -Min. format sheet: 300 mm x 280 mm -Max. format sheet: 1030 mm x 1400 mm -Max roll diameter : 400 mms. -Electric power machine: 24 kW -Compressed air: 6 bar -Automatic MABEG feeder, Suction feeder table -Diathermic oil-heated calander with MTA autonomous thermal unit -Automatic sheet separator -Automatic stacker in delivery -Complete italian made, In production, available in May
Stock 14R5-P / 1250 P - laminating machine year 2004 max. size 1,250 x 1,640 mm min. size 500 x 500 mm Paper 100-400 GM2 Solid Board max. 350 g corrugated board max. 7 mm in production good condition
Laminator 380 Plus • Automatic feeder with suction head • Inlet stacker • Automatic sheet separator • Film trimming device (includes cutting and trimming blade) • Chrome plated rolling roll •Touch screen • Anti-bend system • Fans for cooling after the grille • Stamping system included used foil rewinder • Hydraulic rolling roller pressure Specifications: Maximum film reel size: 0.75 x 4000 m Film thickness: 23 – 42 μm Film mandrel shaft: Ø75 mm Maximum film reel diameter: Ø340 mm Material Weight: Digital printing paper: 135 – 350 g/m² Other paper: 157 – 350 g/m² Maximum format: 390 x 520 mm Minimum format: 200 x 300 mm Maximum speed: Up to 15 m/min Top rolling roll diameter: Ø120 mm (chrome plated and polished) Lower rolling roll diameter: Ø80 mm (silicone) Accuracy: ±2mm Power: 3200 W Electrical voltage: 200-240VAC – 5 ...
Laminator - paper overboard Tùnkers Model S-1450 Year 1997 Working width 1450 mm Substrate Feeder automatic suction feeder Laminate Feeder by hand Details with pressing roll Delivery delivery on a table Condition can be purchased `as-is`or refurbished on most parts (ask details) Available Direct or very soon
PME inline embossing station for integration into an existing laminating line (coarse linen): - Rubber counterpressure roller (diameter: 250mm) - A water-heated embossing roller (diameter: 254mm) - Web tension control with load cell - Pneumatic adjustment of the counterpressure roller - Pitching pressure in the pinch gap 100kN - Main drive with 5.5 KW - Maximum mech. Speed: 60m/min. - Maximum working width: 800mm - Connected load: approx. 30KW - Power consumption: approx. 20KW - Compressed air requirement: approx. 2.5 Nm³/h at 6 bar - Easy to change the embossing roller - Year of construction 2013
Spare parts Foliant Taurus 530 SF YOC 2011; Display, electronic components, cylinders, compressor Becker DT 4.16; Compressor T4.25 DSK. Spare parts for Foliant Taurus 530 SF year 2011; display; electronic parts; cylinders; compressor Becker DT 4.16 and T4.25 DSK.
Laminator Neschen K 1100 N , top condition , up to 45 mm throughput height
Laminator - paper over board Make Tùnkers Model S-1100 Year ///// Workingwidth 1100 mm As standard laminator Automatic feeder - register - full surface gluing - manual feeder into automatic lamination station - pressing belt - delivery on table As spot label gluer Automatic feeder - register - full surface gluing - alignment for manual placement on vacuüm belt - pressing belt - delivery on table Both options ? Okay ! Automatic feeder - register - full surface gluing - alignment for manual placement on vacuüm belt OR manual feeder into automatic lamination station - pressing belt - delivery on table Delivery delivery on a table Condition example machine sold throughly refurbished by us almost consessionless - this machine is eventually obtainable from the USA - all new pneumatic - all new shafts for the pressing station - all bearings replaced - all new belts - ...
Cerutti coating machine for Paper, films and Aluminium Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporation (water). This process is repeated in lin ...
Laminator Peak PP-450 HR; good condition; cleaned and tested; Working width 450mm; .max. Strength 350mic.; temperature range 100-160 C'; Speed 650mm/min.; Table unit. Laminating machine Peak PP-450 HR; good condition; cleaned and checked; working width 450mm; max.thikness 350mic.; temperature 100-160C'; Speed 650mm/min.; table top machine.
Material width max. 820 mm PET 12 to 20my OPP 15 to 75 my BOPP 12 to 75 my OPA 30 to 50 my Paper 45 to 110 g/m2 Composite foils with aluminium 40 to 250 my Composite foils without aluminium 40 to 250 my Main functions of the machine Previously used for priming and varnishing various plastic films and composites, also used after digital printing. Technical specification Unwinding Roll diameter Up to 1 000 mm Core diameter 76 and 152 mm Roll weight Up to 1 000 kg Side edge control FIFE DP-30 Web Guide Controller. Pre-treatment station Corona AHLBRANDT TG 3104-TP Gravure coating unit 2 coating carriages 1 for primer and 1 for varnish. For coating cylinders circumference 350 to 860 mm. Bale width 900 mm Some coating cylinders. DRYER With circulating air up to 120°C Dryer length 2 x approx. 2.2 ...
Solvent-base & water-base combi laminating machine Max. coating width 1.100 mm Mechanical speed 450 m/1' Working speed up to 400 m/1' Roll diameter of the main unwinder 1.000 mm Roll diameter of the secondary unwinder 1.000 mm Reel diameter of the rewinder 1.000 mm Inner diameter of the main roller cores 152 mm Inner diameter of the secondary cores 152 mm Inner diameter of reel cores 152 mm Max. reel weight of the main reel 1.200 kg Max. roll weight of secondary unwinder 1.200 kg Max. reel weight of the rewinder 1.200 kg Tape tension range main unwinder 2 – 40 kg Tape tension range secondary unwinder 2 – 40 kg Tape tension range of the rewinder 2 – 40 kg Max. temperature in the dryer at a room temperature of 20°C 120°C Solventless lamination with one-component adhesive trolley cart with 4 solve ...