thermoforming machines used for sale

currently setup for thermoformed shells for pizza shell outer size 280 mm, inlay inside 230 mm, depth 20 mm shells useful also for flame cakes, crepes and similar products with gassing dimensions abt. 4.000 x 1.000 x 1900 mm overhauled 2012

Illig SK 74-C from a workshop for the disabled Year of construction 2006 Serial No.426-0172 JM80Q2 +2 pallets with approx. 38 rolls of film Dimensions in mm approx. 2200x1600x1600

Illig SB 53- C from a workshop for the disabled with few operating hours Serinenr. 233-2484 Siemens Simatic control system Dimensions in mm approx. 2000x1600x1000 for transport reasons, the cylinder was removed (see photo) Also for sale: Illig SK 74-C from 2006

Type: MUTIVAC R 530 Film type: flexible Bottom film width: 625 mm Top film width: 610 mm Cut-off length: 657 mm Pack sizes: 2.1 (2 pack.: 640 x 267 mm) Max.depth: 200 mm Vacuum pump: 250 m3/h Length: 8500 mm

Multivac R 570 , film width 470 mm , discharge 320 mm , Darfresh , under and upper web labeller.

Multivac R 140 , built in 2008 , film width 420 mm , take-off 300 mm , variator tool, formats 1.1 + 2.1 + 2.2 , built-in vacuum pump, photocell with pressure mark control. well-maintained condition. Length 3.6 >meters

Well-maintained thermoforming machine Multivac R 240 , soft film , film width 430 mm , take-off 530 mm , 5 different formats. Fumigation. Machine in production until Feb. 2024. Length of the machine approx. 9.5 meters

Film width 420 mm , Trigger 250 mm , Vario tool, MAP Machine completely overhauled and immediately available

Sell a used functional deep drawing machine WEBOMATIC Type ML 7000 Machine width: 560 mm Preferred: 220 mm Formats: 1.1 /2.1 / 3.1/4.1 for hard and soft foil with built-in vacuum pump with residual foil winding Side plates are all available Fun

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder

Manufacturer: CFS (GEA) Type: Compact 420 YOM: 2010 El. specs: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 YOM: 2010 includes 4 format sets Vacuum Pump: BUSCH R5 Includes ESPERA outfeed conveyor Condition: very good

Used thermopacking machine from Ulma, model TF-SUPRA. Year of production 2006. The machine uses two types of foil. The lower foil is plastic and, passing through the forming station under the influence of heat and stretching, takes the shape of the mold, creating a package. Once the foil has cooled, it moves to the loading area where the products are placed into the package, this function can be performed manually or automatically using special assistive devices. After filling the molds, the upper foil is placed above the mold and welded to it, it is possible to simultaneously create a vacuum in the package and fill it with protective gas. Ultimately, the cutting station separates the packages into individual or groups that leave the machine in exactly the condition in which the recipient is to receive them.

Used thermoforming roll line by Tepro, model LPP 420-30/3618. New: 2014. Machine serviced, very good condition. Technical data: Machine stroke mm 300 Forming chamber mm 282x356 Pressing depth mm max. 130 Filling field length mm 900 Distance between tools mm 1800 Efficiency cycle/min 4-12 Vacuum pump m3/h 100 Power supply V/Hz 3x230/50 Power kW ~ 13.5 Compressed air pressure bar min. 6 Cooling water consumption l/min 8-15 Compressed air consumption Nl/cycle 100-150 Width of the upper foil mm 420±1 Bottom foil width mm 420+2 Max. bottom foil thickness (soft / hard) mm 0.3 / 0.6 Max. bottom foil diameter mm 400, sleeve 76 Max. top foil diameter mm 400, sleeve 76 Weight kg ~1300

Multivac R 530, rigid films + soft film, film width 420 mm, trigger 560 mm 2.3, MAP fumigation, long loading, jumbo roll holder for film, double film holder for top film, printing mark control, 3 x cross cutting for soft slide, 3 x hard foil stamping

Packaging machine Dixie Union Packaging Machines modular - Function 1: Deep drawing - Function 2: Sealing - Function 3: Vacuuming - Function 4: Printing - Packaging size max.B/ L/H: 270 x 320 x 100 mm mm - Total power: 15 kW - Machine weight: 1600 kg - Space requirement (W x D x H): 6.8 x 1.0 x 1.8 m - Condition: very good details PA/PE film packaging/paper packaging e.B. for medical devices with cliché print Soft blister, machine was in use until dismantling accessories Flexographic printer (cliché printing) AMACO DV 120, Y.O.M. 1998, documentation

Scanware Blister Control System: - Screen EM TFT 15" - Camera system DOM-323/SU/4C (with 3x camera JAI CV-M71CL) - Product recognition system LYNX-Spectra - Multiplexer MUX-3 3xCL - White light LED lighting LEDW-Po3/S5 - Lighting attachment ES-323 - Light panel KAN-303 - Network and I/O module S02

Multivac R 240, film width 430 mm, fume hood 530 mm, 5 formats, soft film, fumigation, good condition. Still in production until February 2024

Used CFS Compact 420. This machine is a professional automatic thermoforming line, which is used for vacuum packaging of almost all kinds of meat products, fish and seafood, cheeses, salads, vegetables, fruit, confectionery and other food products. Operating principle The packaging is formed automatically by the machine from two films - top and bottom. The product is placed by the operator in cells made of bottom film. The product is automatically sucked out by a vacuum system, sealed, cut and labelled (optional). Forming of trays of different types and sizes is carried out by manual mould change. The operator can program the step, speed, time, temperature and vacuum level. The machine is adapted to work on soft film. Width of film: 420 mm Capacity: 8-10 tacts per minute Mould dimensions: Division 2.2 Dimensions of a single tray: 195 x 115 mm Stroke advance: 250 mm B ...

Special items deep drawing film Under film white 150 my 432 mm wide 40 rolls a. 500 lfm. = 20,000 lfm Upper foil white 70 my 415 mm wide 40 rolls a. 500 lfm. = 20,000 lfm Roller core: 76 mm suitable for feta cheese packaging or similar Prices on request

Format trolley for storing format parts for deep drawing machines made entirely of stainless steel with three drawers, a drawer and a storage surface, mobile with brake rollers Extracts resilient with 30 kg and with food-approved plastic, as well as the tray bevelled construction prevents the car from tilting. Format trolley is used for the proper storage of formats with all accessories. All parts are located in one place and can be driven to the machine when changing formats. Dimensions: 1250x900/600x1100 mm (WxDxH)