other storage equipment used for sale

Special offer: approx. 10.000 pieces Euro rotary stacking container, 600 x 400 x 300mm, grey and blue - used - : Price per piece ex location: only 4 € (net), minimum order 6 pallets (approx. 360 pieces). Price per piece ex truck acceptance (approx. 3.960 pieces) 3.-€ (net) Price for complete order: 2,50.-€ (net) / piece! Rotary stacking containers can be inserted into each other when empty. This can save up to 70% space. These containers can be stacked on top of each other by rotation – even without a lid. If they are rotated 180 degrees again, they are nestable. Manufacturer: unknown, could be Schoeller Allibert Type: unknown Year of construction: unknown, probably 2005 Dimensions: 59.5 cm L x 40 cm W x 32 cm H The following information is subject to change: Outdoor 600 x 400 x 300 Inside. 460 x 340 x 270 Stack height 285 Nesting ratio 72% Wit ...

approx. 490 pieces compartment separator (freestanding) for shelves 80cm, SSI Schaefer – used - : Prices per piece ex location: 2,50 € (net) dismantled, packed and loaded! Manufacturer: SSI Schaefer Type: TRF-D 4817 G Year of construction: unknown Height: approx. 17cm Depth: approx. 76cm – for shelf depth 80cm Galvanized Original price: ca. 8.-€ Condition: good Available: as of now Location: Frankenberg warehouse (Saxony)

approx. 4 – 5 pieces work tables, height adjustable - used - : Price ex location: 400.-€ (net), dismantled, packed and loaded! Manufacturer: Herbert Grüttner Type: Modulus Year of manuf.: unknown, height-adjustable – with motor Type 1 – 1 piece: Table top with semicircular cut-out Width: approx. 1.60m Width rear wall: approx. 1.30m Rear height: approx. 1,28m Total height rear: 1,90m Total height incl. luminaire: approx. 2.10m Depth: narrow side of the worktop: approx. 95cm Total depth of the table on the narrow side: approx. 1.05m Type 2 – 2 pieces: Table top approx. B: 2m x 1m Total height approx. 2,20m Type 3 – 1 piece: Table top approx. B: 1,60m x 0,75m Total height approx. 2,20m Type 4 – 1 piece: Table top approx. 0,90mm x 1,30m Condition: good Available: from the end of Oct./Nov. 2021 Location: Frankenberg warehouse (Saxony)

approx. 452 shelves Meta, 1m x 0,40m / 0,60m - used - : Price per shelf: 8.-€ (net)! Minimum order: 50 pieces Manufacturer: Meta Type: Meta Clip Year of construction: unknown Depth: 60cm Width 1m = approx. 52 pieces Depth: 40cm Width 1m = approx. 400 pieces Shelves are partially knocked out or slightly bent on the holders for the floor supports. But a blow with the hammer should be enough so that they can be hung up again without problems. Height: approx. 4cm Payload: unknown – would have to carry at least 100kg Condition: good Available: as of now Location. Frankenberg / Saxony

approx. 1.000 pieces depth bars / bulkhead bars for 80cm deep shelf SV, Bito - used - : Prices per piece ex location: 1,50 € (net) dismantled, packed and loaded! Minimum order: 200 pieces Manufacturer: Bito Type: SV Year of construction: unknown Quantity: 1 lattice box full Condition: good Available: as of now Location: Frankenberg warehouse (Saxony)

Platform load: 350 kg/m² Year of construction: 2005 Location: Cologne

Column-Mounted Crane DEMAG Capacity 500 kg Arm travel 3400 mm Manual arm rotation Column height 3000 mm Column base diameter 700 mm - with base discs (see photo) Electric hoist I beam dimensions: 220 x 100 mm (see photo) Total weight approx 2 T MACHINE IN OUR STOCK IN FRANCE.

Column Mounted Crane KONECRANES Capacity: 125 KG Year of construction: 2009 Height under hook: 2,5 meters max Machine delivered with: 1 rudder (Max capacity: 100 KG) Total length: 5 meters

Column-Mounted Crane VERLINDE type XC2 Capacity 500 kg Column Ø 250 mm Column height 4400 mm Height under arm 3700 mm Trolley useful length 2700 mm Delivery with one fixing plate Ø 810 mm (see photo) Weight Total weight approx 2 T MACHINE IN OUR STOCK IN FRANCE.

Column Mounted Crane 2 T MANUTENTION CONNECTION type PFSP Capacity: 2 Tons Arm travel: 2000 mm Year of construction: 2001 Column diameter: 400 mm Max height under hook 2200 mm Column height: 3100 mm Height under beam 2800 mm Electric hoist 2 T

1 x Reimelt Outdoor Silo Ø 2,800 mm Height approx. 12,500 mm Content approx. 51 cbm ~ 30 to flour Completely for sale Price on request Phone 0172 8345457

1 x Reimelt Outdoor Silo Ø 2,800 mm Height approx. 12,500 mm Content approx. 51 cbm ~ 30 to flour Completely for sale Price on request Phone 0172 8345457

We offer: 1 used rear wall grille Dimensions: approx. 2,750 x 1,000 mm There are 35 piece(s) in stock 21698 Harsefeld Per piece € 147,00 net plus 19 % VAT from stock 21698 Harsefeld. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.

1000 pieces of insert grid 1315 x 1030 x 30mm Used goods, very good condition, see pictures. Bearing rod height 30 mm Load-bearing rod thickness 2 mm Mesh size 40 x 4 mm galvanized Negotiation price: € 39,-- net per piece Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)

Production hall hbs780s and warehouse hbs645s, which are to be dismantled in the short term. These are thermally insulated halls whose supporting structure and cladding as well as various accessories can be reused. Production hall hbs780s GFA area: approx. 780 m²; Hall width: approx. 30.00 m AK façade; Hall length: approx. 26.00 m AK façade; Frame spacing: approx. 5.60 m MM truss; Eaves height: approx. 7.75 m OK purlin; STRUCTURE: The primary structure consists of hot-rolled Euro profiles. The secondary structure to accommodate the building envelope consists of cold-formed steel profiles made of galvanized strip steel. ROOFING: Sandwich panels, grey-white, on purlins made of cold-formed and galvanised lightweight profiles. WALL COVERING: Sandwich panels and thermally insulated sheet steel cassettes on wall substructure made of cold-formed and g ...

- Production hall ground floor 800m² - Office 100m² - 2 indoor cranes 10T and 5T lifting capacity span 20m - 2 roller shutters, clear width 5m – clear height 4.5m - Production hall with partial basement basement 240m² - Apartment with conservatory 100m² - Land area 2500m² The area definitions posted here have been researched with the greatest care, but do not claim to be exclusive and are only made available for information purposes without obligation.

approx. 73 pieces Corlettes, width 1.96m wide - used - : Prices per unit ex location: 109.-€ (net)! We reserve the right to a minimum purchase quantity! At a later date, more quantities will be available for sale! Manufacturer: Cordes Type: Universal Corlette Year of manufacture: unknown Type: 1 - 58 pieces UC-196.003 Metrics: Exterior 196x115x237 Interior: 185x110x215 Weight: 116kg Load capacity: 600kg Load: 600kg Stackable in 3 ways Type 2 – 15 pieces UC-196.002 Exterior 196x116x217mm Weight: 116kg Stackable Load capacity: 600kg Load: 600kg Stackable in 3 ways Condition: good Available: now Location: 72379 Hechingen

approx. 82 pieces of corlettes in 3 sizes plus upholstered trolley - used - : Prices (net) per piece ex location: Type 1 (1,30m): 89.- € Type 2 (2,40m): 139.- € Type 3 (3m): 139.- € Type 4 – Upholstered trolley: 39.- € We reserve the right to a minimum purchase quantity, primarily complete sale of the individual sizes! Manufacturer: Cordes Type: unknown Year of manufacture: unknown Foldable Not stackable Type: 1 – 1.30m Width: 1.30m Depth: 1.15m Height: 1.60m Quantity: 32 pieces Type 2 – 2.40m Width: 1.30m Depth: 1.15m Height: 1.60m Quantity: 40 pieces Type 3 – 3m Width: 3m Depth: 1.15m Quantity: 10 pieces Type 4 - Upholstered trolley Length: 2.35m The first folding level is on 33 cm with a width of 60 cm and the second level is on 133cm with a support surface of 40 cm. Quantity: 18 pieces Available: now Condition: good  ...

P134 - used approx. 40 m³ / 40,000 L polyester tank, GRP tank, lying on steel bases, good condition. Technical details: Capacity: approx. 40 m³ / 40,000 litres Material: Polyester / GRP Manufacturer: Reich-Tank Dimensions: approx. Ø 3.00 m × L 6.50 m / H incl. base 3.70 m Miscellaneous: Used polyester tank, professionally cleaned and in good condition. Above-ground tank on 2 steel bases, dome and all connections on top of the tank body. Pictures from the inside will follow. Only the pure tank is sold, without attachments such as pipes, fittings and accessories. The tank can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam trays, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc. Price on request. Transportation can be arranged at a reasonable price. It is not possible to update all our  ...

P409 - used approx. 25 m³ / 25,000 litres HDPE tank, plastic tank, double-walled, flat bottom tank. technical details: capacity: approx. 25 m³ / 25,000 litres material: HDPE tank, plastic tank manufacturer: Formoplast specific weight: min. 1.55 kg/L dimensions: approx. Ø 3.49 m × H total 4.50 m test mark: PA-VI 321.103, DIBT and media list available, AHL/ASL listed Miscellaneous: Used HDPE tank in good condition, cleaned inside, uncleaned on the outside. Above-ground storage tank for outdoor use, standing on a flat floor, double-walled, lid on top of the roof, several inlets and outlets. Only the tank itself is being sold, without attachments such as pipes, fittings and accessories. This container can be used as a storage tank for many different media. Former tank for 40% ironIIIChloride, DIBT and media list available. Sulfuric acid tank, hydrochloric acid tank, blea ...