pillow packs machines used for sale

ALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil sealing machine 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - Extra 4) Storage device for wrapped packages - Extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos

An Enflex automatic packaging machine for powdery and granular products for the production of pouches from heat-sealable wrapping materials with three or four-sided sealing is available. Dosing capacity min./max.: 5cm³/50cm³, min. bag width: 50mm, min. bag height: 50mm, max. bag width (single bag): 65mm+65mm, max. bag width (with perforation): 70+mm, max. bag height: 150mm, packaging capacity range: 150-18000 bags/h. Wrapping material (all heat-sealable wrapping materials): Polyethylene opaline, cellophane, polyester, organic polypropylene, etc. Machine dimensions X/Y/Z: approx. 5000mm/1100mm/2100mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible.

PFM Pearl Flow wrapper Serial: D4990 2019, flow wrapper, Twin jaw machine, infeed 3000mm, overall length 4700mm, adjustable folding box, HMI touch screen controls, up to 160 per minute, 220mm jaw width, with manuals, drawings and some spare parts, mobile, 3Ph

Chamber dimensions X/Y/Z: approx. 460mm/550mm/200mm, welding bars: 4, welding bar length: 440mm, welding seam: double-seam separation sealing, machine dimensions X/Y/Z: approx. 1000mm/950mm/1100mm, weight: approx. 600kg. On-site inspection is possible.

Tevopharm B.V. / BOSCH Flow wrapping machine in good condition with markem imaje Smart Date X60 Printer.

Speeds: 15-100 PPM 64-Program Memory No product No bag PLC controlled color touch screen Misplaced product detection

Max. speed: 90 bags/min.

Bag width min./max.: 2x 120mm/190mm, bag height min./max.: 100mm/350mm, max. packaging capacity: 200/min, bag material: sealable film laminate, electrical power: approx. 150-20kVA, bag types: Flat bottom bag/stand-up pouch, lift consumption: approx. 600Nl/min, dimensions X/Y/Z: approx. 6700mm/2600mm/2400mm. Documentation available. An on-site inspection is possible.

Was used for filling 10l milk bags, there is a second machine as a source for spare parts available.

Was used for filling 1l milk bags, output: 1000l/h, the electronics of the machine was overhauled.

Working height: 820-900mm, max. film width: 550mm, output: 60 cycles/min, product width: 25-450mm, product height: 2-200mm, product length: 80mm to unlimited, connected load: 3kW, length: 2140mm, width: 1450mm, weight: 650kg, with documentation.

There are two identical vertical bag filling machines available, weight: 1.1t.

Two flow wrapping machines and a Hugo Beck shrink tunnel are available. 1) Hugo Beck Flexo 500 S flow-wrapping machine, year of manufacture: 2004, max. film width: 550mm, product width min./max.: 25mm/450mm, product height min./max.: 2mm-200mm, min. product length: 80mm, packaging capacity: 80 cycles/min, machine dimensions X/Y/Z: approx. 2200mm/1500mm/900mm, weight: approx. 700kg, packaging material: PE/PO/biofilm/recycled film/half-tube and flat film. 2) Flow wrapping machine Hugo Beck Flexo 500 S, year of construction: 2001, max. film width: 550mm, product width min./max.: 25mm/450mm, product height min./max.: 2mm-200mm, min. product length: 80mm, packaging capacity: 80 cycles/min, machine dimensions X/Y/Z: approx. 2200mm/1500mm/900mm, weight: approx. 700kg, packaging material: PE/PO/biofilm/recyclate film/half-tube and flat film. 3) Shrink tunnel Hugo Beck 5012/25, year of constructi ...

Packaging capacity: 40-100 packs/min, max. packaging dimensions X/Y/Z: unlimited/115mm/50mm, max. film width: 590mm, machine dimensions X/Y/Z: approx. 3500mm/1000mm/1800mm, weight: approx. 800kg. Including infeed conveyor 2550mm/120mm with indexing, carton inserter, infeed chain approx. 2000mm and photocell Sick. Documentation available. On-site inspection is possible.

With documentation and some accessories, an on-site inspection is possible, but not under power.

Seven tubular bag machines from Affeldt are available: Two E350 DV models (built in 1999 and 2004 with around 3 million packs and 192,460 operating hours), three AVN E350 D models (built in 1999, 2014 and 2014 with 3.7 million packs and operating hours of 14,405 and 16,305 respectively) and two AVN E350 DN models (built in 2001 and 2002 with around 5.2 million packs). The machines produce approx. 22 packs of 2.5 kg per minute. They are offered without printers and labelers. Individual sale of the machines is possible.

Packaging speed: 10-150/min, max. film width: 450mm, min./max. cutting length: 100mm/340mm, max. product width/height: 140mm/80mm, control: Fuji Map Check 3, documentation available. On-site inspection is possible.

A Schur form-fill-seal machine is available. The machine was used in the food industry.

A horizontal flow-wrapping machine used in the food industry is available. Packaging weight min/max: 80g/1000kg. On-site inspection is possible.

Two identical vertical flow-wrapping machines from PFM are available. 1) PFM Zenith, year of manufacture: 2012, weight: approx. 870kg, connected load: 5kW, packaging output: approx. 60/min. 2) PFM Zenith, year of manufacture: 2009, weight: approx. 980kg, connected load: 6kW, packaging capacity: approx. 60/min. Both machines were used in the food industry for packaging individual bags in a large outer bag. Documentation available. On-site inspection is possible.

Roll width: 500mm, bag dimensions X/Y: 250mm/159mm, packaging capacity: 2 bags/cycle, filling weight range: 200g-250g, cycles: 50, control: Siemens Simatic S7-300, machine dimensions X/Y/Z: approx. 5800mm/2000mm/2300mm. Documentation available. On-site inspection is possible.

Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025.

A machine for the production of foam pads according to demand and product for the packaging industry is available. Packaging capacity: 23 bags/min, film width range: 470mm-600mm, container volume range: 60l-1000l, foam type: polyurethane foam, machine dimensions X/Y/Z: approx. 1500mm/2000mm/750mm, weight: approx. 350kg. Documentation available. On-site inspection is possible.

Two Rovema vertical form fill and seal machines are available. The two machines were converted by Burtscher. Packaging capacity: approx. 1200/min, film width 1/2: 470mm/260mm, film length: 340mm/230mm, bag volume: 2000g/500g with the above-mentioned widths and lengths. Machine dimensions X/Y/Z: approx. 2000mm/1800mm/3200mm. The machines show signs of use and defects in the bag sealing. On-site inspection is possible.

A Fuji horizontal flow-wrapping machine with integrated shrink unit, smoking and conveying system is available. Packaging capacity: 1000 bags/min, max. film width: 600mm, infeed screw: approx. 2300mm, max. product dimensions X/Y/Z: 200mm/250mm/100mm, material: stainless steel, machine dimensions X/Y/Z: approx. 4800mm/1300mm/1500mm. Documentation available. On-site inspection is possible.

Welding Width: 1100 // Bag Length (Max): 1500 mm

Width 40 cm Built in 1999 Flow wrapping machine Conveyor system Foil Packing Machine Shrink tunnel Roller table Price on request. We supply and install worldwide.

Horizontal packaging machine for the automatic production, filling and sealing of stand-up pouches (doypacks) with regular and irregular shape, with hanging hole, with zipper. Suitable for middle-sized stand-up bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second filling station (dosing unit and charging hopper) does exist, either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications:  ...

Premade pouches packaging/filling and closing machine, rotary operation with 6 working positions. Suitable for flat pouches and doypack style pouches. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(100-350)xW(100-210)mm. - Tech ...

Horizontal packaging machine for the automatic production, filling and sealing of stand-up pouches (doypacks) with regular and irregular shape, with hanging hole, with a spout on top. Suitable for middle-sized stand-up bags. Integration of liquid and paste dosing units possible. One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(110-260)xW(90-180)mm | filling capacity: max. 1000ml ...