boilers used for sale

2 gebr. Boiler ------------------------------- - mounted on frames - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 m² Capacity : 800 kg/h Ab. Operating pressure : 10.0 bar Increased test pressure : 18.0 bar Water capacity at NW approx. : 748 l Water content full approx. : 1.108 l Year of construction : 1994 equipped with Weishaupt gas burner G5 1-D, ZMD, 175-940 kW, gas control section, feed water pump, control cabinet and the existing coarse and fine fittings.

1 gebr. Boiler ---------------------------------- - mounted on frames - Manufacturer : VIESSMANN Type : Vitomax 200 HS Heating surface approx. : 11.6 m² Capacity : 700 kg/h Firing capacity approx. : 520 kW Ab. Operating overpressure : 6 bar Increased test pressure : 12.2 bar Water content at NW approx. : 1.4 cbm Year of construction : 2005 CE mark : CE0035 equipped with Weishaupt gas burner type WG, ZMD version, control cabinet, gas control section, Feedwater pump, boiler platform and the existing coarse and fine fittings.

2 gebr. Boiler --------------------------- Manufacturer : LOOS International Type : U-HD 500 Heating surface approx. : 9 m² Power max. : 500 kg/h Ab. Operating overpressure max. : 13.00 bar Increased test pressure : 24.05 bar Water content full approx. : 770 l Year of manufacture : 2007 CE mark : 0036 equipped with Weishaupt WG40N/1-A gas burner, ZM-LN, 55-550 kW, Gas control system, Eco Control cabinet with touch panel, feed water pump and the existing coarse and fine fittings

1 gebr. Low Pressure Steam Boiler --------------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : U-ND Capacity : 800 kg/h Ab. Operating overpressure : 1 bar Increased test pressure : 2 bar Total. : 1.108 l Year of manufacture : 2004 CE mark : 0036 equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200-900 kW, 120°C, gas control system, Control cabinet with touch panel and the existing coarse and fine fittings.

1 gebr. Rapid steam generators ----------------------------------------- Manufacturer : CERTUSS Type : Universal Capacity : 1,800 kg/h Max heat output : 1,311 kW Operating overpressure : 16 bar Test pressure : 57 bar Water content approx. Taxi: 218 ltr Heating area : 23.7 m² CE mark : CE 0035 Year of manufacture : 2006 equipped with Certuss gas burner, gas control section, Control cabinet, mounted on the boiler body, and the existing coarse and fine fittings

1 gebr. Rapid steam generators ----------------------------------------- Manufacturer : CERTUSS Type : Universal Capacity : 1,300 kg/h Max heat output : 947 kW Operating overpressure : 10 bar Test pressure : 57 bar Water content approx. : 155.7 l Heating area : 23.7 m² CE mark : CE 0035 Year of manufacture : 2004 equipped with Certuss oil burner, oil flow rate 40 – 80 kg/h Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings

1 gebr. Rapid steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 500 Capacity : 500 kg/h Heat output : 334 kW Operating overpressure max. : 16 bar Water content approx. : 43 l Year of construction : 1996 with brand-new heating coil equipped with Weishaupt gas burner, gas control system, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Max. steam output: 250kg/h, including documentation.

A Bosch steam boiler with Weishaupt oil burner is available. 1) Bosch ECO 1, year of manufacture: 2021, volume: 51l, max. permissible pressure: 31bar, test pressure: 51bar, max. temperature: 238°C, heat output: 87kW. 2) Bosch UL-S 2000, year of manufacture: 2021, volume: 3315l, max. permissible pressure: 13bar, test pressure: 24.7bar, max. temperature: 195°C, steam output: 2000kg/h. 3) Weishaupt WM-L20, year of manufacture: 2021, oil output min./max.: 275kW/2000kW, heating oil pressure: 30bar. Including Siemens Simatic HMI control, water treatment, economizer and attachments. Documentation available.

Nominal heating power: 80kW, length: 710mm, width: 1805mm, height: 1072mm.

Nominal heat output: 460kW, max. nominal consumption: 1000W, have been regularly serviced. Only one boiler available. Expected to be available from September 2025.

Operating pressure: 1 bar, volume: 790 kg, output: 800 kg/h, heating surface: approx. 6 m².

Output at 45 PSIG: 440kg/h, max. pressure: 8bar, max. temperature: 121°C, material: stainless steel, steam: sterile, machine dimensions X/Y/Z: approx. 1200mm/800mm/2850mm. On-site inspection is possible.

A Reining waste gas heat recovery system is available. It receives the exhaust gases from the plant and currently generates approx. 25 t/h of steam from the heat of a hot rolling mill. The chimney and the heat exchangers were manufactured by Babcock-BSH around 1983. An on-site inspection is possible. Expected to be available at the end of 2025 or beginning of 2026.

Operating pressure double jacket/tubes: 10bar/6bar, material: stainless steel, operating temperature: 180°C, output: approx. 350kg/h, machine dimensions X/Y/Z: approx. 2100mm/1000mm/3700mm, weight: approx.1500kg. Documentation available. On-site inspection is possible.

With Burner W. Oertli AR-4.

A Bosch low-pressure steam boiler is available. Total volume: 2480l, max. permissible pressure: 0.5bar, test pressure: 2bar, max. permissible temperature: 110°C, steam output: 1400kg/h, insulation thickness: 100mm. Machine dimensions X/Y/Z: approx. 2850mm/3800mm/3350mm, weight: approx. 3350kg. Documentation available. On-site inspection is possible.

Two identical Loos steam boilers with dual burners (oil and gas) and other accessories are available in two stacked sea containers. Steam output: 2x 800kg/h, operating pressure: 10bar, test pressure: 18.5bar, heating surface: 14m², fuel: gas/fuel oil, feed water tank: DK2415. Including new burner motors, automatic burner controls, water pumps with spare parts, chimneys, complete piping, 2x 40-foot sea container, 1000l heating oil tank and feed water tank. With a small conversion it is possible to place the containers next to each other. Documentation available. On-site inspection is possible.

Gas-fired high-speed steam generator with feed water treatment and dosage module., Additional title: high-speed steam boiler, Steam capacity: 120 kg/h, Perm. working pressure: 10 bar, Length: 1,6 m, Width: 0,95 m, Height: 2,2 m, Base construction: mounted on platform, Features: feed water treatment and dosage module

Used steam boiler made by Rumia type Eko with a capacity 1000 kg of steam per hour and pressure of 10 bar. New 1997. 2 pieces available. The boilers will have UDT tests.

I am pleased to offer for sale the complete Heat Recovery Steam Boiler with gas burner. Please see below key details about the power plant: Boiler Manufacturer: GEA - DELTAK Capacity: 20 ton / hour at 25 bar Year of Manufacture: 2006

Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler Very good condition combined heat and power plant with an electric capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate with wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and containing all technical functions from fuel feeding to electric power and live steam dispatch. The equipment has been very well maintained and heavily upgraded throughout its entire lifetime and meets today’s strictest quality requirements. Steam boiler is Circulating Fluidized Bed (CFB) technology with commercial type PYROFLOW, manufactured in Finland by Alhström in year 1989. This CFB boiler has a steam flow of 100 kg/second, a steam pressure of 137 bar, and a temperature of 535ºC. The main fuel has been wood-based biomass with a moisture content of 35- ...

Steam Boiler Plant 120MW / 30 bar Saturated Steam Good condition steam boiler plant for 54 kg/sec saturated steam at 30 bar production to an industrial process. The boiler is membrane walled, bottom supported and it has two natural gas fired and two light fuel fired 30 MW (each) burners located on the top of the boiler. The bottom of the firebox and the lower manifold are protected with refractory tiles. The boiler's flue gas side operates under overpressure and plant has two 100% combustion air fans and there is no exhaust gas fan. The equipment has been very well maintained and upgraded throughout its entire lifetime and meets today’s strictest quality requirements. The steam boiler has natural water circulation, and the heating surfaces are arranged in two drafts: the convection surfaces (evaporator) are in the 2nd draft of the boiler and the feedwater preheater (economizer)  ...

Steam Boiler Plant Babcock Wanson Firetube BWD 4t/h This BWD40 steam boiler plant with all auxiliaries were delivered and installed by Babcock in year 2019. It has three pass firetube design and use a coaxially located furnace tube providing optimum distribution of mechanical stress in operation. This is a key feature for boilers that operate under low or variable steam load and ensures long equipment life. For high efficiency the boiler is equipped with economizer. High quality dry steam is provided due to generous steam space and integral separator. Natural gas burner is Babcock Wanson’s Optimo burner, which gives the BWD40 emission rates of less than 100mg/Nm3 NOx throughout the firing range when burning natural gas. It is designed for unattended operation and thus having Babcock Wanson BW720 Operating System. The steam plant has addition to this steam boiler, chemical dosing sy ...

Very little operated, complete biomass CHP boiler plant with a 9.5 MW bubbling fluidized bed boiler (BFB) designed for wood based fuels combined with a back pressure steam turbine and a heat exchanger to produce hot water from back pressure steam. Plant was made by Estonian Filter Solutions company, who is very experienced in steam boiler plant engineering and EPC contracting company. BFP steam boiler was delivered by Vapor Boilers Finland, steam turbine is made by Indian Triveni Turbines combined with ABB delivered generator and controls. Other main equipment suppliers are KSB for pumps, conveyors from Technobalt AS, rotary airlock valves from Rotolok UK. Power plant was commissioned in 2013 and operated in partial load till 2015. Plant operation program system is made by Filter Solution, it is installed in PCs and contains typical visual process screens. Control room is located in  ...

Hot Water Boiler Plant Schmid 2400 kWth with moving step-grate This Schmid boiler contains a durable, electronically controlled, water cooled moving grate which is designed to burn from wood pellets to wood chips and waste wood. The plant was installed in year 2012 and it has been running with wood pellets till December 2022. It is complete, good condition plant with concrete element building, two large pellet silos and a hot water accumulator tank for heat load balancing. These items will be optionally available for those who are interested in them. It has load controlled primary and secondary air combustion fans as well as speed-controlled exhaust gas fan which ensures high efficiency combustion and low electric power consumption. Two step combustion is designed for low NOx emissions. The durable triple layered ceramic and steel combustion chamber includes flexible dilation joints ...

VAPORE KG/H 1500 P.MAX BAR 11,76 T.MAX C +190,7 FLUIDO VAPORE SATURO - H20 CE

1 piece Weishaupt burner, type G1/1-E, KW 60 - 335, gas type F, category III 1 piece Weishaupt burner, type G1/1-E, version MD, KW 60-335, gas type N, category III 1 piece Weishaupt burner, type G3/1-E, design ZME, KW 90-630, gas type N, category III

SECAT steam boiler and all the equipment of a boiler room Capacity 500kg

Steam generator Manufacturer Beckermesser Type BM 2090 Operating pressure 4 bar Boiler heating 9 kW/h Steam capacity approx. 13.5 Kg/h Water capacity approx. 9.8 litres Documents available