Your found location: Latitude 0.0 + Longitude 0.0

 

Manufacturer:
(Category: 302)

??? 1
ABB 1
Amut 18
APV 1
AST 1
BKG 1
CMG 2
EDI 1
IDE 7
MEP 1
MP 1
MVG 1
NGR 1
OMG 1
OMT 1
PMH 5
PRT 1
SJZ 1
SMC 1
SML 2
TMS 1
TPV 3
extruders /Extruders
date: 23.04.2024 add to watchlist
Machine: WEBER NE 7 Extruders
item-No.: 163561026
New in: 1997
used

Inv. Num. : 7186 Type: NE 7 Producer: WEBER Created: 1997 Parameters: Weight: 3200 kg

extruders /Extruding lines
date: 23.04.2024 add to watchlist
Machine: WEBER 6.5 Extruding lines
item-No.: 163526833
used

Inv. Num. : 7235 Type: 6.5 Producer: Weber Generated: Parameters: Equipment: Calibration table ? Tow strap

extruders /Extruding lines
date: 23.04.2024 add to watchlist
Machine: WEBER DS 6.5 Extruding lines
item-No.: 162581491
New in: 1987
used

Inv. Num. : 7012 Type: DS 6.5 Producer: Weber Created: 1987 Parameters: Switch-on hours: 42,000 h Screw diameter: 65 mm Main motor power: 16 kW Profile width: 240 mm Output capacity: 100 kg/h Number of screws: 2 pieces Line Components: Extruder WEBER DS 6.5 - 17D Calibration table Uniplast UKT 3/3 Stacking table Uniplast UKR 600

date: 23.04.2024 add to watchlist
Machine: EREMA INTAREMA 605K Repelletising plants
item-No.: 163837433
New in: 2019
used

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an INTAREMA® 605K, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are replaced with original EREMA spare parts. The machine is designed for a throughput of up to 90kg per hour and is suitable for LDPE. If you are interested in this machine, please do not hesitate to contact us!

date: 23.04.2024 add to watchlist
Machine: EREMA 1514T Repelletising plants
item-No.: 163837336
New in: 2012
used

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA 1514T, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are replaced with original EREMA spare parts. The machine is designed for a throughput of up to 1100kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!

date: 23.04.2024 add to watchlist
Machine: EREMA INTAREMA 1714 TVEplus Repelletising plants
item-No.: 163837323
New in: 2018
used

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA INTAREMA® 1714 TVEplus®, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 1200kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!

date: 23.04.2024 add to watchlist
Machine: EREMA RGA 80 TE Repelletising plants
item-No.: 163837322
New in: 2000
used

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA RGA 80 TE, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 250-300kg per hour and is suitable for PP. If you are interested in this machine, please do not hesitate to contact us!

date: 23.04.2024 add to watchlist
Machine: PURE LOOP ISEC EVO 002 E Repelletising plants
item-No.: 163828467
New in: 2018
used

We offer you a PURE LOOP extruder for sale that has been completely remanufactured in-house. This machine was put into operation for the first time in 2018 and was taken back by us from the former first owner in the course of an EREMA new machine purchase. The machine is designed for a throughput of up to 180kg per hour and is suitable for PE and PP. If you are interested in this machine, please do not hesitate to contact us!

extruders /Extruding lines
date: 23.04.2024 add to watchlist
Machine: UNION 120 mm Extruding lines
item-No.: 163886142
New in: 2002
used

PET Sheet Extrusion Line Composed of: - Extruder 1 screw, brand: Union, 120 mm, motor: 185 KW (250 hp) double desasifier, year: 2002. - Continuous flow gear pump. - Self-cleaning hydraulic filter changer, brand: Erema, model: SW4/170 RTF. - New replacement spindle. - Head: 1400 mm, brand: EDI. - Calender: 1600 mm wide with 450x600-500 rollers. - 500 mm replacement cylinder - Silicone bath, year: 2017. -Winders. - Working width: 1200 mm. - Thicknesses: 0.2 to 1.2 - Production: 500 Kg/h. - Co-extruder 1 spindle, 80 mm, brand: PTI. -Dehumidifier, brand: Piovan, model: DP-620, year: 2022.

Machine: BATTENFELD P250-SX-2400 / SPR-125 Profile extrusion lines and extrusion plants
item-No.: 161269331
New in: 1992
used

Haul-off and saw combination, consisting of: 1 x Caterpillar haul-off Manufacturer: Battenfeld Type: P250-SX-2400 Year of construction: 1992 Contact length, effective: 2200 mm Pad width: 250 mm Haul-off force, max.: approx. 30,000 N Speed: max. 8.0 m/min. Connected load: approx. 6.0 kW 1 x Saw Manufacturer: Battenfeld Type: SPR-125 Year of construction: 1992 Profile cross-section, max.:230 x 90 mm or 160 x 110 mm Pipe diameter: max. 125 mm Saw blade diameter: 420 mm Travel distance:1000 mm Working speed: max. 20 m/min. Cutting capacity: 15 cuts/min. Saw motor: approx. 1.5 kW

Machine: BLAKE 302-1100-140 Profile extrusion lines and extrusion plants
item-No.: 159384065
New in: 1993
used
Price: 12.900 €

Haul-off-saw combination, used Manufacturer: BLAKE Type: 302-1100-140 Year of construction: 1993 Haul-off force: approx. 10,000 N Pad width: 120 mm Effective contact length: 1100 mm Haul-off speed: approx. 0.5 – 10.0 m/min. Caterpillar clamping: pneumatic Drive motor haul-off: approx. 3.5 kW Drive motor saw: approx. 1.5 kW Profile cross-section: approx. 140 x 60 mm

Machine: BATTENFELD K-400-V4 Profile extrusion lines and extrusion plants
item-No.: 161269330
New in: 1992
used

1 x Vacuum calibration unit for profiles Manufacturer: Battenfeld Type: K-400-V4 Year of construction: 1992 Total length: 6700 mm Vacuum connections: 4 x 8 pieces Water connections: 26 pieces Vacuum pumps No.1-3: 3 pieces of BluVac pumps from Speck, Energy-saving vacuum generation thanks to patented speed control Pump power: 3 x 4.3 kW Vacuum pump No. 4: Speck (5.5 kW) Longitudinal adjustment: electromotive Connected load: approx. 26 kW Accessories: 1 x water pump (1.5 kW) for the water circuit, 1 x blower (0.95 kW) for drying the profile,

Machine: BATTENFELD P-250-SX-2000 Profile extrusion lines and extrusion plants
item-No.: 161155248
New in: 1988
used

Haul-off, used and refurbished Manufacturer: Battenfeld Type: P-250-SX-2000 Year of construction: 1988 Haul-off force: 30,000 N Pad width: 250 mm Effective contact length: 2000 mm Number of rubber pads: 200 pieces Haul-off speed: 0.16 - 4.0 m/min. Drive motor: 4.2 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic Profile cross-section: max. approx. 300 x 100 mm Power: 10 kW Dimensions: 3400 x 1300 x 2300 mm (LxWxH) Weight: approx. 2300 kg Condition: The haul-off has recently been completely overhauled.

Machine: IDE ME-31 Profile extrusion lines and extrusion plants
item-No.: 161155249
New in: 1976
used
Price: 2.000 €

Caterpillar haul-off, used Manufacturer: IDE Type: ME-31 Year of construction: 1976 Pad width: 180 mm Effective contact length: 800 mm Pull-off speed: max. approx. 10.0 m/min. Drive motor: approx. 3.0 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: manually by spindle Profile cross-section: max. approx. 300 x 100 mm Note: The haul-off was overhauled in 2015 and a new electrical control cabinet was installed. Condition: The upper gearbox is leaking.

date: 22.04.2024 add to watchlist
Machine: GWELL GWC 80-156 WPC production line
item-No.: 163630465
New in: 2015
used
Price: 214.290 €

GWELL GWC 80-156 WPC production line manufactured in 2015 is characterised by high production efficiency. WPC boards are made by combining natural components with thermoplastic polymers. This results in a material with the high aesthetics of wood and the exceptional durability of plastics, distinguished by full resistance to fungus, insects and various atmospheric factors. The production line consists of: – GWC 80/156 twin-screw extruder – GWC 65/132 twin-screw extruder – CUT 240 saw – CAL 14000/6 calibrating table – ROL 240 2-caterpillar haul-off – unloading table The WPC profile extrusion line is offered with optional heads for forming different types of profiles from these products. To date, the machine has only been in operation for a dozen days and has not been used at full production scale. For an additional charge, equipment cooperating with the line can ...

extruders /Extruders
date: 22.04.2024 add to watchlist
Machine:  PE 300 Extruders
item-No.: 161297146
New in: 2011
used
Price: 21.405 €

PE 300 plastic recycling and regranulation line was built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. The extruder for plastics used in the processing and manufacturing of various types of materials can produce up to 300 kg of parts in one hour of operation. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. Material production begins by heating the plastic to a maximum temperature of 300°C in the 11 heating zones of the PE 300 granulating line, controlled by thermoregulators. The extruder then presses the material further through a 100 mm diameter screw located in a cylinder with abrasion and rust protection. At the end of the process, the machine head moulds the plastic to give it the right properties and shape. The PE 300 extruder is equipped with thermoregulators with ...

Machine: MAPRE E 2.66.100 Double screw-type extruding machine
item-No.: 163854448
used

Extruder 2 screws : 100 mm Ø 15 L/D Brand: Mapre Model: E 2.66.100 Series No. 155 Engine: 30 KW (40 hp) Parallel spindles forced feeder CM 80 headcutter system with geared motor type F 30 AG 19 123752, no. 1910072-249, brand PIV Antrieb W. Reiner K.G. 2.2 KW (3 hp) Electrical control panel equipped with electronic frequency inverter and electrical temperature control panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Machine: BRüCKNER PVC SHRINK Flat foil extrusion installations
item-No.: 159670790
New in: 2021
used

olienherstellung =: PVC shrink and PET Line speed: 80 meters/min Final net film width: 4.2 meters Line speed: 80 meters/min Production capacity: 21 tons/day The machine includes: -Automatic turnstile unwinder 2 meters -Automatic turnstile -Winder 4.50 meters -Cooling system -automatic thickness control -automatic control of infrared heating -Automatic inline edge strip handling system -TCU -Controller fan -Cooling tower -Exhaust pipes -Exhaust hood -16 steel core width 4.8 meters -Complete spare parts (package purchased for 280.000 €) Dimensions approx. length 50 m x width 19.0 m x height 5.9 m

Machine:  70  Ø  35 L/D Single screw-type extruding machine
item-No.: 163575727
used

Extruder 1 screw: 70 Ø diam, 35 L/D. Brand: Flag, engine: 37 KW (50 hp). No electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

date: 17.04.2024 add to watchlist
Machine: TRIMEC TM 75/30D. Extruding lines for pipes
item-No.: 160798102
New in: 1994
used

Line for complete PE pipe, with automatic dropper inserter. Brand: TRIMEC. Year: 1994. Composed of : A.-Extruder TRIMEC TM 75/30D. Engine: 57.5 kw. Hopper loader. B.-Head for tube. C.-Loader system drippers, with accumulator tank and insertion of TRIMEC drippers. D.-Vacuum bathtub and stainless calibration: 5 meters VC/1. E.-Stainless cooling bathtub: 5 meters. VR/1 F.-Stainless cooling bathtub: 5 meters. VR/1 G.-Interline drill with guillotine TRIMEC DRTS PERFORATING DEVICE. Type GF/1. H.-TRIMEC stretch trolley: 2 TR/1 bands. I.-TRIMEC winder, type: ML3/1.