used MULTIVAC for sale

Type: MUTIVAC R 530 Film type: flexible Bottom film width: 625 mm Top film width: 610 mm Cut-off length: 657 mm Pack sizes: 2.1 (2 pack.: 640 x 267 mm) Max.depth: 200 mm Vacuum pump: 250 m3/h Length: 8500 mm

Chamber dimensions(LxBxH): 660x740x220 mm Machine dimensions(LxBxH): 1600x1100x1350 mm Seal bar length: 2 x 660 mm Gas injection Pump capacity: 160 m³/h Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 8,5 kW ; 24 A

Multivac R 570 , film width 470 mm , discharge 320 mm , Darfresh , under and upper web labeller.

Multivac R 140 , built in 2008 , film width 420 mm , take-off 300 mm , variator tool, formats 1.1 + 2.1 + 2.2 , built-in vacuum pump, photocell with pressure mark control. well-maintained condition. Length 3.6 >meters

Well-maintained thermoforming machine Multivac R 240 , soft film , film width 430 mm , take-off 530 mm , 5 different formats. Fumigation. Machine in production until Feb. 2024. Length of the machine approx. 9.5 meters

Film width 420 mm , Trigger 250 mm , Vario tool, MAP Machine completely overhauled and immediately available

Used packaging machine by Multivac type R 245. New 2010. Packaging machine: - produces vacuum and aerated packaging from deep-drawn and sealable bottom soft or thick film, combined with sealable top film. - has two packaging formats : 250g cube with pack size 145x92.25x approx. 40 mm 500÷600g cube with pack size 188.5x145x approx. 40 mm Power supply 400 V / 50 HZ 3/PE AC phases Rated power 15 kW Nominal current 39 A Max. precharge 50 A

Used vacuum packer Multivac R245. New 2018.

Make : MULTIVAC Model : TS 250 Y.o.m : 2009 Condition : Good

Used labeller, also as a stand-alone solution, MULTIVAC, type: L310 -El. Connection: 3x 400 V, 50 Hz, 2,000 VA

Multivac C400 vacuum sealer, single-chamber unit on castors, with a new membrane keypad (the old one can still be seen in the photo), Gardener Denver 15cbm/h pump, with 3 shelves, year of construction 2008, chamber dimensions approx. 60x45x17cm, Connection 400V, total dimensions LxWxH approx. 86x75x103cm, weight approx. 270kg, used, functional

Product number: 2766J Type: T300 Serial number: 236687 Year of construction: 2016 Capacity: 6 - 10 cycles/min. Dye 1: +/- 200 x 135 mm Dye 2: +/- 248 x 145 mm Compressed air: 7 bar Cooling water: 1.5 Bar Power: 3 x 400V, 50Hz, 6.6kW Dimensions: 2600 x 1150 x 1700 mm Weight: 1100 kg For vacuum and gas flush

Single-seam sealing Single-seam sealing top/bottom Double-seam sealing Double-seam sealing top/bottom Filling plates Automatic chamber lid mechanism Roller conveyor Stainless steel sloping insert Vacuum filter Liquid separator Suction throttle Machine dimensions W x D x H (with open chamber lid) in mm: 880 x 785 x 1480 Chamber dimensions W x D x H in mm: 650 x 450 x 170/250/330/380 Pump capacity in m3/h: 100/150 Delivery time: 30 working days after advanced payment

Multivac R 530, rigid films + soft film, film width 420 mm, trigger 560 mm 2.3, MAP fumigation, long loading, jumbo roll holder for film, double film holder for top film, printing mark control, 3 x cross cutting for soft slide, 3 x hard foil stamping

Multivac R 530 , built 2007 , film width 460 mm , print 480 mm , hard foil , M+R under-track labeler , 1000 ccm booster pump , Very good condition.

The Multivac R535 packing machine from 2012 is about 11.3m long. It has a 607 mm upper film and a 623 mm undercarriage.

Multivac T200 Tray sealer Serial: 125 Stainless, currently set to seal a 285mm x 175mm tray, mobile, 3Ph

Multivac vacuum chamber packaging machine (inline) Manufacturer: Multivac Type: B500 Year of construction: 2007 Speed: 2.5 cycles/min Microprocessor control Collection of sections Conveyor belt width: 750 mm Power: 7.2 kW Working principle: continuous (inline) high-speed vacuum packaging machine Products: cheese, meat and other bulky products

Manufacturer: Multivac Type: B500 YOM: 2007 Speed: 2,5 cycles/min microprocessor control Collection of trimmings Conveyor width: 750 mm Power: 7,2 kW Working principle: continuous high speed vacuum packaging machine Products: Cheese, Meat and variety of bulky products

Multivac AG6 swing top vacuum packer Swing top vac packer, twin chamber, 450mm sealing bars, buusch vac pump, mobile, 3Ph

Product number: 2755J Type: T250 Serial number: 115818 Year of construction: 2007 Dye: 320 x 215 mm Tray height: max 130 mm Vacuum pump: Busch, 100 m³/h Compressed air: 7 - 10 Bar Water: 1.5 - 4.5 bar, 35 l/h Power: 3 x 415V, 50Hz, 6.2kW Dimensions: 1000 x 800 x 1600 mm Weight: 425 kg

Product number: 2753J Type: MR822 Serial number: 218523 Year of construction: 2015 Belt width: 225 mm Power: 230VAC, 50Hz, 16A Dimensions: 2750 x 1200 x 1900 mm Bizerba checkweigher Type: MR8 / CWE Serial number: 11156838 Year of construction: 2015 Scale length: 345 mm Max: 600 / 1500 g Min: 20 g e=: 0.2 / 0.5 g d=: 0.2 / 0.5 g S+S metal detector Type: GLS 350/150/100/289/143 Serial number: 10008507-H Year of construction: 2015 Passage: 350 x 100 mm

Multivac R 240, film width 430 mm, fume hood 530 mm, 5 formats, soft film, fumigation, good condition. Still in production until February 2024

Used double chamber vacuum packaging machine Multivac AG800 has two chambers which ensure greater efficiency and is used in every industry where vacuum packaging of products is required. The machine is equipped with a high-performance Busch vacuum pump with a capacity of 100m3 / h and four sealing bars with a length of 650mm. The internal dimensions of the packing chamber are: 650 mm x 800 mm x 220 mm high. Busch vacuum pump: 100m3. Final pressure: 0.5 mbar Vacuum system: according to the sensor External dimensions of the machine: 1560 mm x 1100 mm x 1150 mm. Dimensions of sealing bar: 650 mm x 4. Weight: 275 kg.

Manufacturer: Multivac Model: Thermoforming Packaging Machine R 145 Multivac Thermoforming Packaging Machine Model: R 145 Frame length: 4000 mm Nominal machine width: 320 mm Mains voltage: 400 V Machine voltage internal: 400 V Year of construction: 2010 Bought in 2020, very neat condition. Purchased for product development Performance and Capacity: Number of tracks: 2 Number of rows: 1 Drawing depth: up to 70 mm, adjustable in 5 mm increments Tool spacing: approx. 2475-3050 mm Electrically driven F145 hoists for moulds (4-point suspension) and for seals (2-point suspension), opening width of 150 mm each for top foil holder and bottom foil holder F 22, 3" core diameter Edge strip winder RSW 22 for max. strip width 60 mm per side

Multivac A300 Vacuum packer Serial: 6818 2004, stainless vac packer, 450mm sealing bar, 2.7Kw, mobile, 3Ph

Multivac R 230, year of manufacture 2001, film width 355 mm, draw-off length 210 mm, free loading section of 1,6 m, MC96II control with LCD monitor, 10 mm side trim, two cross-cut guillotines, height-adjustable discharge conveyor, central chain lubrication, new servo inverter for chain feed, Vario tool with interchangeable formats. Format: 1.1 . 335 mm x 210 mm 2.1 - 167.5 mm x 210 mm 2.2 - 167.5 mm x 105 mm 3.1 - 111.66 mm x 210 mm Total length of the machine 5,15 m Operational and wear parts replaced.

Multivac MR 335 tamper-evident labeller for the application of 2 self-adhesive tamper-evident seals on the closure points of formed cartons, 2 label dispenser model SUPER MR4000, label passage width max. 50 mm, label reel maximum diameter 360 mm, reel core diameter 76 mm, labelling speed up to 1.2 m/s, width of through conveyor 190 mm, speed of conveyor from 0.35 to 1.08 m/s, infeed/outfeed height approx. 820-920 mm, machine on wheels, electrical connection 230V/50Hz, 16A, maximum load 2.5 kW, compressed air 6 bar, machine floor space approx. 2738 x 1210 mm (WxD), machine height approx. 2300 mm, machine net weight approx. 700 kg

Multivac T200 Tray sealer 2007, Stainless, twin tooling currently set to seal a 200mm x 130mm tray, mobile, 3Ph

The C500 sub-vacuum consists of a double bell to optimize the packaging process. It allows the packaging of products under vacuum and in a protective atmosphere. Each bell has 2 welding bars. TECHNICAL DETAILS: - Machine dimensions (d x w x h): 1050 x 1600 x 1065 mm. - Bell dimensions (d x w x h): 745 x 650 x 200 mm. - Weight: 650 kg. - 4 casters including 2 directional - Synthetic loading plates for the bell. - Bell in standard execution. - Bell cover for bell height 200mm. - 2 parallel weld bars, l = 650 mm, front and rear. - BUSCH pump of 250 m3 FEATURES: - Auto shut-off function with boiling point recognition. - Fully graphic display - Emergency vacuum stop - Intuitive operation - Accurate vacuum measurement via vacuum detector - 18 selectable languages - Program brief for 29 recipes.

Multivac double sided labelling machine: Type: MR425 Year of production: 2005 Serial number: 23932/05 2 label dispensers type MR411 attached. One dispensers labels from the top down and the other dispenser labels from the side. It can put labels on up to 200 mm in height. Dimensions: 2.900mm x 1.600mm & 2.100mm (LxWxH) Very high capacity. Condition: good

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1996; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 266mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.1; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R530; Year of production 1996; Working only with hard foil; Bottom foil: +/- 465 mm (approx); Upper foil: +/- 455 mm (approx); Molding length: 192mm; Forming width: 404mm; Molding depth: 40mm; Formats: 4.2; Length: 7000 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R270 CD; Year of production 2004; SKIN packing machine; Working only with hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 244mm; Forming width: 364 mm; Molding depth: 80mm; Formats: 2.1; Length: 6800 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R230; Year of production 2002; Machine designed for packing sandwiches; Working only with hard foil; Bottom foil: +/- 320 mm (approx); Upper foil: +/- 315 mm (approx); Molding length: 165mm; Forming width: 80mm; Molding depth: 80mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 2100 mm; Weight: 1500 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R5200; Year of production 1989; Working with soft or hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 182mm; Forming width: 370 mm; Molding depth: 70mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 1800 mm; Weight: 1400 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.

Product number: 2791J Type: T800 Serial number: 180781 Year of construction: 2014 Capacity: max 15 strokes/min. Dye: (6x) +/- 133 x 203 mm Tray depth: max 150 mm Power: 3 x 415V, 50Hz, 8.4kW Dimensions: 4550 x 1000 x 2000 mm Weight: 1700 kg Including WW10 tool changing trolley and RS800 shelving system

Multivac Vacuum double chamber with built-in vacuum pump

Multivac mobile traysealer, type: T250, serial number: 115818, year of construction: 2007, 415 V, 3 Ph, 50 Hz, 20 A, 6.2 kW, Busch vacuum pump, type: RA 0100 E 5Z1, number: 070020406, year of construction: 2007, capacity: 100 m³ per hour, dimensions dye: 350 mm x 245 mm, total dimensions: 1330 mm x 800 mm x 1650 mm. With pallet with additional dye, dimensions dye: (2x) 275 mm x 170 mm.

Multivac traysealer, type: T350, number: 41, year of construction: 2006, 400 V, 3 Ph, 50 Hz, 30.5 A, 8 kW, plastic mesh belt, belt width: 200 mm, dimensions dye: (2x) 313 mm x 200 mm, total dimensions: 3650 mm x 1050 mm x 1920 mm. Including trolley with dyes, pallet with books and cooling.

Multivac mobile traysealer, type: T300, serial number: 236687, year of construction: 09/2016, 400 V, 3 Ph, 50 Hz, 22.6 A, 6.6 kW, dimensions dye: (2x) 230 mm x 165 mm, film width: 420 mm, total dimensions: 2600 mm x 1100 mm x 1700 mm.

Multivac mobile traysealer, model: T200, serial number: 101677, year of construction: 2005, 415 V, 3 Ph, 50 Hz, 11 A, 4.5 kW, dye: (2x) 230 mm x 160 mm, Busch vacuum pump, type: RA 0063 E, capacity: 63 m³ per hour, total dimensions: 1050 mm x 780 mm x 1600 mm.

Was used for packing syringes, speed: 14 cycle/min, cut-off length Injectomat without/ with cannula/ other: 200/ 255/ 285mm, paper width at 60gr/m²: 415mm, film width 75/75 CPP/ PE: 421mm, blister: 6-lane, length: 6500mm, with Inserter Müller & Kurz, year of manufacture 1991 and Flexographic Printer Amaco DV 131, year of manufacture: 2006.

Nominal power: 19kW, an inspection is possible.

Vacuum packaging machine Multivac C 500, built in 1999, 1st hand, barely used, no meat or fish was packaged, clean condition, Chamber dimensions: width 660mm, depth 750mm, height 200mm, Seal length: 2 x 650mm, External dimensions: width 1,600mm, depth 1,050mm, height max.: 1,320mm, Performance: approx. 2 cycles/min, Voltage: 400 volts, Weight: approx. 700kg, 6 gas nozzles per rail, protective gas device, Sealing rail with water cooling, Machine mobile, 1 piece rotary vacuum pump, Busch R5-RA 0250, 1-stage 250m3/h suction power, Dimensions / weight: LxWxH: approx. 3,100 x 1,000 mm x 2,000 m (without lifting and tipping device), weight approx. 800 kg

Output: max. 80 packs/minute, designed for square cups (101 x 101 x 57 mm),, two lanes,, consisting of the following individual machines:, shell destacking, make Carsoe Anytray Twin Denester, year of construction 2013, volume dosing filler, manufactured by Lieder/Robot Food Technologies, series AWF, type 2, year of construction 2015, for free-flowing, non-sticky products that contain little liquid., min. 15 pieces of product must make up the volume to be filled The machine is designed for processing e.g. vegetable mixtures, rice, pasta, caviar, olives, etc., With lifting and tipping device and corresponding housing, without dispenser for liquid or pastes, self-made, Time-controlled pump for dosing oil, brine or pasty products such as dips or dressings, two filling stations,, tray sealing line, make Multivac type T700, year of construction 2012, Sealing of prefabricated trays, bowls and c ...

MULTIVAC T-350 for gas packaging Pneumatic system with working pressure: max. 7-10 bar. 4kW. A minimum of 10, a maximum of 30 products can be packed. It is equipped with an intelligent micro-operated control unit that stores various settings for 220V/3PH/60hz operation.

THERMOFORMER, MULTIVAC, TYPE: M855FMC Technical description: Serial number: 1378 Format: (1x) 172 x 112 mm Power supply: 380/440 V - 50/60Hz Power: 7 kW Excess film extractor Dimensions: 4500 x 1300 x 1950 mm It includes: Automatic tray unstacker Filter unit Excess film remover