Model
(Manufacturer: HOMAG)
pneumatic carcass press with 4 pressure elements from above 2 sides working area 3200 x 1600 - YOC 1975
Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below. 1 Quickmelt incl. evaluation device level.
1 Quickmelt incl. evaluation device level. Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below.
Power Control PC85, Woodwop, ATC 12-speed, A lot of accessories, Gluing unit, ... 2 retractable and extendable changing tables, two-part clamping table with 2 processing stations for pendulum occupancy, edge height max. 65 mm, chip and remnant disposal, drill head 17 spindles, main spindle 14.5 KW, speed 24000 1/min Incl. many accessories Condition: dismantled
Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 1998 SKU:4-060-24-0165 2.056.10.3021 Saw blade: ø180 mm Nmax: 10,000 rpm
Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 2000 M-No.: 4-02078 000W04206041 Nmax: 9,900 rpm
CNC vertical machining center DRILLTEC Type: V-200 Optimat BHX055 Year of construction: 2021 only 564 operating hours Workpiece length 200 - 3050 mm incl. roller conveyor Workpiece width 70 – 850 mm Workpiece thickness 12 – 60 mm Workpiece weight max. 35 kg Speed of axes X/Y 50 m/min., Z 15 m/min. Vertical Drill Gear V13/32 mm High Speed 2 rows of drill bits, each with 5 drill bits in parallel in X-direction 1 row of drill bits with 5 drill bits in Y-direction Total drill length 70 mm Drill diameter max. 35 mm Spindle spacing 32 mm Horizontal drill gear with 4 spindles (2 right, 2 left) in X-direction, can be called up individually, drill spacing 32 mm Horizontal drill gear with 2 spindle (1 right, 1 left) in Y-direction, can be called up individually Groove saw in X-direction, diameter 100 mm Tool change spindle HSK 63 and converter 10 kW Tool diamet ...
I am selling a fully equipped edge banding machine HOMAG EDGETEQ S-500 KAL370 Ambition 2484, built in 2019: Configuration: Input stop servo-motor adjustable Manually adjustable joint milling Edge banding with preheating tanks 2 pcs. Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling top + bottom pneumatically adjustable Round unit 4-motor servo motor adjustable R2 / second set R1 included Swivel groove saw unit Radius scraper blade Multiradius servo motor adjustable Scraper blade surface can be pneumatically adjusted Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 8-60mm Edge material thickness 0.4-12 (20)mm Feed speed 16 to 25m/min. Overall length including feed plate 8365mm Mileage status 833,000 meters. Input appar ...
Overview of the assembly: - Release agent spray unit top & bottom - Joining milling unit 2 x 4 kW - Glued part with workpiece preheating, 2 rolls, pressure zone C and QA34 application unit for PU with quick clamping system - autom. Adjustment pressure zone - Preparation for Lasertec activation unit - Hl84 cross-cut unit 0.8 KW - pneum. Adjustment pre-milling unit - Pre-milling unit Bf10 1.5 kW - Mould milling unit Fk11 Manual - Autom. Adjustment of chamfer to radius milling machines - Rolling side probe FK - Pneumatic adjustment FA11 for lateral displacement from the working area - Multi-drawing blade MN 21 autom. for a maximum of 5 different profiles. - Finishing unit (glue joint drawing blade and swabbing ridge) - Detergent spray unit top & bottom - powerControl PC22 Workpiece and edge parameters: - Workpiece width without edge min: - For workpiece thickness ...
Overview of equipment: - Workpiece support scissor design with roller support, 1000 mm extendable - Infeed ruler automatically adjustable - Fixed stop side left - Inlet interlock pneumatically controlled - Upper pressure via driven composite V-belt - Height adjustment electric - Workpiece transport device via transport chain with rubber support - Release agent spray unit top/bottom - Joint milling unit 2 x 3 kW - Gluing part A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick clamping system, 2-roll magazine, pressure zone C (auto-adjustable, with 1 pre-press roll and 6 repress rollers) - Cross-cut unit HL84 0.8 kW, with autom. Adjustment chamfer/straight as well as pneum. Adjustment flush/protrusion caps - Pre-milling unit 1.5 kW, pneum. Adjustment of bündi/protrusion milling machines - Mould milling unit FK11 with autom. Adjustme ...
Fixed stop side on the left. Brief description of the equipment: - Fixed stop side left - Workpiece transport device - Upper pressure - Control Power Control PC22 - Release agent spraying unit - Joining milling unit, 2 x 3 kW - Gluing part A20 Basic for rolls up to 3 mm and strip goods up to 20 mm, with melting unit with granulate container and quick-clamping system - Cross-cut unit, 2 x 0.8 kW, with pneum. Dissimulation - Lubricant spray agggregat - Pre-milled aggreagt 1.5 kW, pneum. adjustable - Mould milling unit FK13, 2 x 0.4 kW - Universal milling unit 4 kW, controlled, with infinitely variable axis - Multi-plastering device MN21 autom. - Finishing unit FA11, with finishing device, detergent application and buffing unit, pneum. adjustable -Noise protection - Free space for additional processing units Further equipment information: - Machine stand throughout f ...
Single-sided edge banding machine for machining of straight workpiece edges and for banding and post-processing of various edge materials in longitudinal and transverse passing. Automatic conversion from radius to chamfer and different edge and workpiece thicknesses. Control Power Control PC 22 OVERVIEW OF UNIT ASSEMBLY: – RELEASE AGENT SPRAYING UNIT – JOINING MILLING UNIT – GLUING PART A20 WITH 2 ROLLS Application unit PU 65 (Teflon-coated for PU gluing) – CROSS-CUT UNIT HL84 – PRE-MILLING UNIT – FK11 SHAPE MILLING UNIT – FREE SPACE UNI MILLING UNIT UF10 – PROFILE SCRAPER PN10 – FINISHING UNIT (with detergent information) – Feed rate 20 m/min – Total length 8635 mm 2. WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 12-22 mm ¦ 60 mm – For workpiece thickness 23-40 mm ¦ 105 mm – Workpiece protrusio ...
Console table with LED suction cup position indicator, 8 manually movable brackets (length 1340mm) each with 3 vacuum cups, 6 support rails Workpiece clamping via vacuum pump 100/140m³/h LED system for vacuum clamps, Z-laser (ceiling laser) for contour display Working area X 4175 mm Working range Y up to 1875 mm (milling with 25mm drm), 1600mm all units Working range Z 300 mm Drill head MPU (with C-axis): 30 spindles: 20 of them vertical ; 10 horizontal drilling spindles, Groove saw max. 200mm drm Main spindle 15 kW, liquid-cooled, with vibration sensor and C-axis 360 grd. , Interface for Flex-5+ unit 18-fold tool changer (plate) at the bottom and 10-fold WZW at the top Adapter unit included: – Flex 5+ sawing, drilling, milling unit Control Power-Control PC 85 with Woodwop 5.0, also for AV station incl. cooling unit in SS Tool transfer station Some of the tools shown, ...
I am selling a stacking system HOMAG BARGSTEDT TBH22/D/25/12, built in 2001. Destacking system One-sided guide Spout also suitable for pallets. Postural head vacuum shoe system. Vacuum system (with pump) Automatic loading. Entry table motorized roller system Exit table on the floor with lifting mechanism motorized roller system Exit table front roller system Enters feed roller stazion for quilted material. Security fences fully complete ! Working capacity Approx. 8 cycles / min Available right away. Ready for use, possible to test. With CE certificate and full documentation.
I sell radius copy milling unit for edges suitable for CNC machining center machines with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12,000 rpm. Radius R2mm. HSK63 posture. Available the same.
I sell a center saw with continuous HOMAG FPL620/06/15/P S/LQ. Year of construction 2007. Working width 204 - 1304mm Element height 12 - 60mm Cutting width 100mm Blank length 300mm Feed speed 10 - 40 m/min. Configuration: 1 + 1 pcs. cutting units top + bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. grooving unit with stop and softforming function Material pressure tape with conveying from above. Continuous machine. Condition Very good. Available same.
Technical Details: - X axis working area: 3050 mm - Y axis working area: 1250 mm - Main Electrospindle power: 10 KW - Number of controlled axes: 3 axes - Total number of drilling spindles: 25 - Total number of tool changer positions: 4
Manufacturer: Homag Postforming, Type: VFR10/22, Year: 1997, Control: Homatic/NC 16, Software: Homag, Finished product: Türzargen/Verkleidungen, Indirekt Postforming: yes, Work piece width min-max mm: 60-1000, Min.-max. workpiece length in mm: 800-2500, Min.-max. workpiece height in mm: 16-28, Workpiece protrusion mm: 55-30, Profilarten : L-Profil/U-Profil, Postformig Fräsaggregate Stück/kW: 2 X 1 kw, Universalfräsaggregat Stück/kW: 2 X 4 kw, Leimauftrag für Profile mm: U-105, Düsensystem: yes, Furnierbefeuchtung: yes, Heiz und Ablüftstation: yes, Profildruckstrecke: yes, Fräsaggregat : yes, Fräsaggregat U-Profil/Nuten: yes, Year :1997
Manufacturer: Perske, Type: DA-10-2, Modell: Umformer, Seriennummer: 78695, Year: 1996, Grösse: 300 kg, war verbaut inMaschine: Homag Doppelseitige Kante, Frequenzumrichter: yes, Hz: 50-200-300, Power Output: 1101/165/35 Ampere, Year :1996
Manufacturer: Homag, Type: FL 20/07/15/S, Year: 2003, Destacking plant: PC 21, Vereinzelung: Woodline, Software: yes, Maschinensteuerung: 220 - 1500, Machine no 1: 220, Motore Maschine 1: 8 - 90, Machine 2: yes, Motore Maschine 2: 500, Kantenversiegelung: 10- 40, Conveyor: yes, Trittschal: max 110, Einlegstattion in Kartons: 25 mm, Min.-max. workpiece height in mm: 11, Working width min-max mm: yes, Working hight min-max mm: 6,6, Machine with controlled dogs: yes, Cam distance mm: 6,6, Feeding speed min-max m/min: yes, Feed stepless: 11, Min-max protrusion of workpiece mm: yes, 3 Engine power kW: Mittelschnitflasch Arbeitsbreite 300 - 500 mm, Year :2003
Manufacturer: Homag KF, for right machine side: Geräteträger mit Verstellung, Number of motors: für linke und rechte Seite, Motor : komplett mit Aggragaten, kW-Leistung : und Verstelleinheit,
Manufacturer: Homag , Type: 4 Motoriges Kopieren, Year: ca.1993, FREETEXT1: komplett mit Ständer Flanschplatten<CRLF>, FREETEXT2: inkl Tasteinrichtung, FREETEXT3: 4 Motore /165 Volt/300 HZ 18000 Umin, Year :ca.1993
Manufacturer: Homag KF, Year: 1996, FREITEXT1: Asrichtlineal rechts, FREITEXT2: gesteuert, FREITEXT3: 8 Positionen verstellbar, FREITEXT4: länge 1400, FREITEXT5: mit Halter Maschinebett, Year :1996
Manufacturer: Homag Verleimteil gebraucht, Type: Q 34, Year: 1996, FREITEXT1: vorhanden für linke und rechte Seite, FREITEXT2: 2 Linke Seite/2 rechte Seite, Year :1996
Manufacturer: Homag Einlaufrollenniederhalter, Year: 1996, FREITEXT1: Höhenverstellbar, FREITEXT2: länge ca 1500 mm, FREITEXT3: 2 Stück, FREITEXT4: mit Sicko Höhenverstellung, Year :1996
Manufacturer: Homag Eckenkopiergerät FK 03, Ersatzteil aus Maschine: Homag KF , für Maschinenseite links: yes, für Maschinenseite rechts: yes, Motorenanzahl: 12000, kW-Leistung : 0,55, Volt/Hz : 380/200, Horizontal Rollentastung : yes, Vertikale Rollentastung: yes, pneumatisch ansteuerbar: yes, pneumatisch gesteuert : yes, FREE TEXT: zum Bearbeiten der Kantenüberstände an der<CRLF>Werkstückober- und unterkante sowie zum<CRLF>Umfräsen der Werkstückvorder- und hinterkante,
Manufacturer: Homag Ausrichtzylinder , FREITEXT1: Ausrichtseite rechts, FREITEXT2: 2 Stück, FREITEXT3: mit Sicko verstellung,
Manufacturer: Homag, Type: Streckenprozessor, Model: S.-4Achser Rev5 NEC-Sch., Serial number: 2-083-02-7013, Year: 3/93, Year :3/93
Manufacturer: Homag Steuerschrank, Type: NC 20, Year: 1996, FREITEXT1: Komplett mit Tatstatur und Bildschirm, Year :1996
Manufacturer: Homag Eckenkopierschwabbeln, Type: FS 11/FS 10, Year: 1996, Ersatzteil aus Maschine: Homag KF, für Maschinenseite links: yes, für Maschinenseite rechts: yes, Polieraggregat: yes, Eckenkopierenfunktion: yes, Motorenanzahl: 1, Bürstendurchmesser mm: 2 X 1405017, Bürstenbreite mm: 50, Volt/Hz: 380/50, Horizontal Rollentastung: yes, pneumatisch ansteuerbar: yes, Bürstendurchmesser mm: 2 X 1405017, Bürstenbreite mm: 50, Volt/Hz: 380/50, Horizontal Rollentastung: yes, pneumatisch ansteuerbar: yes, Year :1996
Manufacturer: Homag, Type: FL 20/06/30/S, Year: 1995, Maschinensteuerung: Homatic, Machine no 1: Quermaschine, Motore Maschine 1: 5, Magazine: yes, Conveyor: Kette, Work piece width min-max mm: ca.220, Min.-max. workpiece length in mm: 220-3000, Min.-max. workpiece height in mm: 10-40, Machine with controlled dogs: yes, Cam distance mm: ca.400, Feeding speed min-max m/min: 6-40, Feed stepless: yes, verängerte Kette mm: yes, Nockenaushebung: no, Magazine: yes, Overall milling units: 10, Moulding units swivel-mounted: 5+5, gesteuerte Fräsaggregate: no, 1st milling unit kW / rpm: 6,6/5800, 1. swivelling controllable: schwenkbar, 2nd milling unit kW / rpm: 6,6/5800, 2. swivelling controllable: schwenkbar, 3rd milling unit kW / rpm: 6,6/5800, 3. swivelling controllable: schwenkbar, 4th milling unit kW / rpm: 6,6/5800, 4. swivelling controllable: schwenkbar, 5th milling unit kW / rpm: Freipl ...
Manufacturer: Homag, Type: FL 62/25, Year: 1988, Maschinensteuerung: Homag, Min.-max. workpiece length in mm: 250-1500, Min.-max. workpiece height in mm: 3-80, Cam distance mm: 900, Feeding speed min-max m/min: 5-40, Feed stepless: yes, Min-max protrusion of workpiece mm: 30, verängerte Kette mm: 900, Nockenaushebung: no, gesteuerte Fräsaggregate: 2, Scoring saw controlled: yes, 1st milling unit kW / rpm: 4,5/5890, 2nd milling unit kW / rpm: 4,5/5890, Year :1988
Manufacturer: Homag, Type: Schnellwechselköpfe FK 11 / FK 13, FREE TEXT: Preis je Stck,
Hersteller : Homag Floppy, Spare part from machine: Einschub Floppy, Type: HD SCSI 10TE CPU 30, Serial number: 2-083-03-0045,
Manufacturer: Homag, Type: Rollendruckzone, FREETEXT1: Länge ca.1000 mm, FREETEXT2: 16 Stück Druckrollen gefedert, FREETEXT3: Verstellbar, FREETEXT4: Rollen Gummierung defekt,
Manufacturer: Homag Verleimteil gebraucht, Type: Q 34, Year: 1996, FREITEXT1: vorhanden für linke und rechte Seite, FREITEXT2: 2 Linke Seite/2 rechte Seite, Year :1996
Manufacturer: Homag KF/FL/KL 20, Type: Pneumatische Mittenunterstüzung, Year: 1996, FREITEXT1: Länge ca.16000 , FREITEXT2: Gerät kann gekürtzt werden, FREITEXT3: Pneutisch Hochklappbar, Year :1996
Manufacturer: Homag Zerspaneraggregat, Ersatzteil aus Maschine: Homag KF 62, für Maschinenseite rechts: yes, Motorenanzahl: 2, kW-Leistung : 3,0/4,4, Volt/Hz : 380/100, Drehzahlen U/min : 2880/4400,
Manufacturer: Homag Radiusziehklinge, Ausführung links: yes, Radiusziehklinge: yes, Tracing by roller: yess, Wechselstähle: yes, Wendemesser: yes, ziehend: yes, Radien 2/3 mm: yes, Automatischer Radienwechsel: no, Ständeraufbau: yes, Kettenbahn/Oberdruck: yes, Zustand: gut, Available: sofort,
Manufacturer: Homag aus Homag KF 20, Type: Ein und Ausgangskarten Streckensteuerung,
Manufacturer: Homag Kantenfräsgerät, Ersatzteil aus Maschine: Homag KF 62, für Maschinenseite rechts: yes, Motorenanzahl: 2, kW-Leistung : 0,55, Volt/Hz : 380/165, Drehzahlen U/min : 12000, Siko Anzeige : no, Horizontal Rollentastung : yes, Vertikale Rollentastung: yes, pneumatisch ansteuerbar: no, Schwenkbar vertikal: yes,
Manufacturer: Homag Ziehklingenaggregat, Ausführung rechts: yes, Radiusziehklinge: yes, Steuerbar: no, Tracing by roller: yes, Wechselstähle: yes, Wendemesser: yes, Radien 2/3 mm: yes, Automatischer Radienwechsel: no, Ständeraufbau: yes, Kettenbahn/Oberdruck: yes,
Hersteller : Homag Ausgangskarte 16 X 24 Volt, Spare part from machine: Kantenmaschine, Type: Homatic, Serial number: 2083015408,
Manufacturer: Homag , Type: KF 20/13/QA/10 + KF 20/15/25/QA, Year: 1997, Control: Homatic, Min.-max. workpiece height in mm: 8 - 60, Machine no 1: KF 20/13/QA/10, Angular transfer: TD 31/25/08, Machine 2: KF 20/15/25/QA, Arbeitsbreite Maschine min - max mm 1: 240 - 1000, Arbeitsbreite Maschine min - max mm 2: 240 - 2500, Cam distance mm: 500, Feeding speed max m/min: 10 - 40, Premilling: KD 10, Edge magazine: 2, Mitre stations: HL 04, radius milling: 0,5 kW, Buffing unit: 0,25 kW, Buffing unit: 0,25 kW, Top pressure belt/roller: Riemen, Year :1997
Manufacturer: Homag, Spare part from machine: Homag Fräsständer ohne Motore, for left machine side: Linke und rechte Seite, Pneumatically controlled: yes, FREE TEXT: Nur Ständer ohne Motore/mit seitlichen Schwalbeschwanzführungen,