From a company liquidation Specifications: Eisele VMS 300 Saw blade diameter 300mm Mitre cuts up to 60° right---left 30° possible Right stop + roller block Cutting Areas 90° 120x75mm---45° 80x75mm Round 90mm Saw blade speeds 40/80 m/min Coolant pump Rbeld 380 volts
Specifications: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the vice 205 mm - Cutting range - with saw blade diameter 350 mm - at 90° approx. 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° approx. 100 mm - flat 100 x 100 mm - Mitre adjustable - Left up to 45° - Right up to 30° - Saw blade speeds 17 + 34 1/min - Drive 400 V / 2 / 2.6 kW - Coolant device - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg
No. 5230: 1 Gebr. Cold circular saw with additional gearbox for 4 speeds Fabr. EISELE, Type VMS II - S - PV ( Type-No. 421 ), Bauj. 1986 with feed - roller conveyor approx. 2 m Arb.-Ber.: Ø 80-102 /flat 160x75/82 mm, drive power: 1.4/1.9 kW Other: Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + stop) Weight approx. 400 kg No. 5230: 1 used Cold circular saw with additional gearbox for 4 speeds Make EISELE, mod. VMS II - S - PV ( Type-No. 421 ), new 1986 with Feed - roller conveyor approx. 3 L Workrange: Ø 80-102 /Flat 160x75/82 mm, main motor: 1,4/1,9 kW Remarks: Auxiliary gear 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min saw blades Ø 275 - 315 mm space requirement approx. 80 x 90 x 180 cm ( plus roller conveyor + fence ) weight approx. 40 ...
Metal circular saw cold circular saw Eisele VMSII Metal circular saw Eisele, partially newly laced, incomplete as spare parts carrier or for completion. The machine was partially dismantled for overhaul and partially re-laced. The electric motor and the gearbox work, machine table and vice are in order. Coolant tub, base. The lever for the feed movement, the associated rack, the electric switch, the saw blade, the clamping nut for the saw blade etc. is missing. The saw can be minbecauseed in the miter. Sale as spare parts carrier!
Circular saw semi-automatic in very good condition and fully functional. Equipment: • Feed speed infinitely variable • Feed actuation hydropneumatic • Pneumatic material tension • Spray and coolant device • Protective hood electr. locked • Miter adjustment infinitely variable 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.
Basic refurbished 2018 Saw blade 350-400 mm Engine power 6.5 / 8.5 KW Speed 1500/3000 min-1 Saw height control: electronic Working range Max square: 120 x 120 mm Flat maximum work area: 200 x 100 mm Flat maximum work area: 250 x 70 mm (width only) Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-600 mm (~ 9999 mm Mehrfachhib) Nachschubgeschw. Max. 500 mm / s Weight approx. 1300 kg Dimensions Lxwxh 1800mm x1300mm x1950mm The machine is completely overhauled in our House and is then in a like-new condition. Among other things, following points are renewed: -Modification on PLC control -Conversion on Siemens HMI user interface -Conversion to ball screw with servo control -New electric components -New pneumatic lines -New pneumatic components -Conversion on Valve terminal -Optimization of the Absaugungleistung -New Menzel mi ...
Overhauled: 2018 Year of construction: 2001 Blade 315-360 mm Motor power 15 KW Speed 15 - 130 min-1 Cutting speed 350-16.4-142.8 m / min Saw height control: electronic Working range Max square: 120 x 120 mm Workspace flat Max: 160 x 120 mm Work area round maximum: 140 mm Saw speed 0-65 mm / s adjustable Section length 5-970 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight 1600 kg Dimensions Lxwxh 1900mm x1250mm x2100mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled on request in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive ...
PLC control: PLC B & R C220 Saw blade 350-400 mm Motor power 15 KW Speed 1500-6000 min-1 Cutting speed 1650-7500 m / min Saw height control: fully electronic Square maximum working range: 130 mm Flat maximum work area: 200 x 100 mm Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-900 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2100 kg (Magazine), approx.: 2000 kg Dimensions Lxwxh (saw) approx.: 2000mm x 2000mm x 2200mm (Magazine) about: 7300mm x 3800mm x 1200mm Footprint Lxw 9200 x 4200 mm Fully automatic high-speed sawing machine with supply chain magazine for non-ferrous metals and plastics The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The PLC control ensure a simple and very profitable operation of the system. Due to ...
Overhaul year: 2018 Year of construction: 2000-2008 Saw blades Carbide / HSS: 315-360 mm Power saw motor: 15 KW Infinitely variable speed: 15 - 130 min-1 Cutting speed Blade (350 mm): 16.4-142.8 m / min Saw height control adjustable: electronic Bdgmy08nkg Square 90° maximum working range: 100 x 100 mm Work area round 90° max.: 110 mm Supply length 5-970 mm (~ 9999 mm multiple hub) Supply AC servo max speed: 300 mm / s Compressed air connection provided on site: 6 bar Approximate weight saw: 1800 kg Dimensions Lxwxh: 1900mm x 1250mm x 2100mm LxB floor space: 1900 mm x 1250 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. The machine is completed retrofit, both technically and visually in mint condition. A ...
Overhauled: 2018 Year of construction: 1994-2000 Blade 560 mm Engine power 6.5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100-4200 m / min Saw height control: electronic Square maximum work area: 170 x 170 mm Flat maximum work area: 300 x 150 mm Work area round max.: 200 mm Saw speed 0-40 mm / s adjustable Section length 5-950 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight approx. 1900 kg Dimensions Lxwxh 2200mm x2700mm x1950mm The machine is both technically and optically after completed retrofit in mint condition. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The programmed HMI control system ensures easy and very profitable operation of the plant. The soundproof cabin this reduces the noise emissions to a minimum. The machine will be overhauled on request in our House. Amo ...
Saw blade Ø: 275 mm Cutting range at 90° round: 90 mm Cutting area at 90° rectangle: 75 x 75 mm Mitre cutting area at 45° rectangle: 75 x 75 mm Saw blade speed: 40/80 rpm Drive motor: 380 V, 0.5/0.9 kW Space requirements: 700 x 600 x 1580 mm Weight: approx. 180 kg
Specifications: Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed infinitely adjustable Saw blade size max. 440 mm Opening width vise approx. 250 mm Max. cutting height approx. 120 mm
Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 120 x 85 mm Mitre cutting area at 45° round: 85 x 85 mm Saw blade speed: 40/80 rpm Cutting speed: Drive motor: 380 V, 1.0/1.2 kW Space requirements: 850 x 520 x 1500 mm Weight: approx. 200 kg
Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.
Made in Germany Saw blade size: 300 mm Saw blade speeds: 40/80 rpm. Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.
Metal circular saw 400 V 400-450 mm saw blade D max 150 mm Square 140 mm Flat 275x70 mm Speeds 6, 12, 24, 48 rpm Cycle Supplies
Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition
Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking
Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice
• Type: VMS 350 • Machine No.: 2934/2 • Sawing speeds: 17/34 m/min. • Mitre: up to 60° right • Stop: approx. 1000 mm • Power: 3x400V, 50Hz/5A • Dimensions (LxWxH): 700 x 700 x 1800 mm • Weight approx: 350 kg • Year of construction: 2001 • In operation since: 1.3.2002 • Accessories: stop approx. 1000 mm, saw blades and cooling water pump
Type: PSU 450 G Country of origin: Germany Saw blade Ø mm: 450 Machine No.: 525/2 Type No.: 47301H0004 Conversion m/min: 10/20 Connection voltage: 400 V / 50Hz Weight approx. kg: 1170
Saw blade Ø: 315 mm Cutting range at 90° round: 90 mm Cutting range at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed speeds: hydropneumat. Stufenl. adjustable Section length: 5 - 1580 mm electr. Connection: 380 V Space requirement: 2300 x 1000 x 2800 mm Weight: 940 kg
IRON SAW Cutting diameter: 100 mm Blade dimensions: 280 mm Speed range: 10, 20, 40, 80 RPM Cutting range 90 ° flat: 120 x 100 mm Cutting range 90 ° round: 100 mm Length stop: 500 mm Semi automatic electric fence Automatic sawing cycle Pneumatic clamping prepared for pneumatic feeder Total power: 1.5 kW Machine weight: 700 kg Condition: good Accessories: 18 blades, roller conveyor 2 m
Description: Technical data: Cutting width 150 mm Cutting height 120 mm Saw blade dimensions 350 mm Motor power 4.5 kW Cutting length 4000 mm Speeds 2890 rpm Approx. Onsite Dimension. (l x w x h): 5,000 x 1,200 x 1,650 mm, weight approx.: 650 kg
Description: Saw blade diameter: 275 mm Cutting diameter: 90 mm Stroke: 120 mm Mitre cuts (on both sides): 90 - 30 ° Speed range: 40 / 80 rpm Operating voltage: 380 V Total power requirement: 1.4 kW weight approx.: 290 kg, Approx. Onsite Dimension. (l x w x h): 900 x 800 x 1,300 mm
Description: Saw blade diameter: 275 mm Cutting area (flat): 140 x 70 mm Cutting area (miter): 100 x 70 mm weight approx.: 268 kg, Approx. Onsite Dimension. (l x w x h): 800 x 700 x 1,500 mm
Description: Blade Dimension : 4780x34x1,1 Speed rotation: 22 to 90 rpm Vice: 510 mm Angled cut 0° cylindrical and square cut 320 mm Flat cut 510x320mm 45°+/- cylindrical cut: 320 mm Square cut: 320 mm Flat cut: 320x310 mm 60° +/- Cylindrical cut: 170 mm Square cut: 170 mm Flat cut: 240x170 mm weight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 800 x 2,000 x 1,800 mm
Description: Machine number 0746 , Table dimensions approx. 440 x 200 mm , saw blade diameter: 300 mm, weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,000 x 1,800 mm, turning speed range: 2000 / 4000 rpm
Description: Iron saw with device for coolant Untested / defects or incompleteness cannot be ruled out Approx. Onsite Dimension. (l x w x h): 2,200 x 650 x 1,650 mm, weight approx.: 350 kg
Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm -Weight: 238 kg
saw blade diameter: 450/500 mm cutting diameter: mm stroke: mm total power requirement: 3,6 kW weight of the machine ca.: 1130 t dimensions of the machine ca.: m - Circular saw - semiautomatic - hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 500 mm cutting diameter: 180 mm stroke: 0 mm total power requirement: 3,5 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 440 mm weight of the machine ca.: 780 kg miter: feed: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 145 mm : : zwei Geschwindigkeiten cooling: ja type: 41103M00U2 mm : 6791 volt: 400 V frequency: 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 145 mm miter: ja pneumatic lifting portal: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 275 x 2.5 x 40 mm cutting diameter: 90.0 mm capacity 90 degrees: flat: 140 x 70 mm capacity 90 degrees: square: 80 x 80 mm capacity 45 degrees: round: 70.0 mm capacity 45 degrees: flat: 90 x 80 mm cutting speed: 40 / 80 U/min total power requirement: 1.2 / 1.4 kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 900 x 750 x 1450 mm Machine from training workshop (BOSCH company) maintained condition () Furnishing: - manual cold circular saw - Column-guided saw head - one-sided miter adjustment over mounted turntable Material support table with degrees - mobile machine base - Pole-changing motor (2x cutting speeds) - manual cutting/lifting version - manual material tensioning - 1x circular saw blade - 1x material stop Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9164093 The data for this ad was created with ...
This Eisele sound-dampened dirty water pump is a jack of all trades. , Whether it is sewage, slip, bentonite or sludge water or just surface water, this, Eisele BS 440 dirty water pump can do it all., , Max. flow: 80 m3/h, Max head: 15 MWK, Max. dirt passage: 20 mm, , If you are interested, please feel free to contact us, we will be happy to help you., , Throughput capacity: 80 m3/h, Max dirt passage: 20 mm, Motor brand: Hatz, Max. head: 15 MWK, Max dirt passag: 1800 rpm, Weight: 1150 kg, , = More information =, , Year of manufacture: 2017, Applicable material: Water, Empty weight: 1.150 kg, Connector size: 4, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer a ...
This Eisele sound-dampened dirty water pump is a jack of all trades. , Whether it is sewage, slip, bentonite or sludge water or just surface water, this, Eisele BS 440 dirty water pump can do it all., , Max. flow: 80 m3/h, Max head: 15 MWK, Max. dirt passage: 20 mm, , If you are interested, please feel free to contact us, we will be happy to help you., , Throughput capacity: 80 m3/h, Max dirt passage: 20 mm, Motor brand: Hatz, Max. head: 15 MWK, Max dirt passag: 1800 rpm, Weight: 1150 kg, , = More information =, , Year of manufacture: 2016, Applicable material: Water, Empty weight: 1.000 kg, Connector size: 4, Technical condition: good, Visual appearance: good, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses ...
Pivoting cross-cut and mitre saw Graule Eisele LMS II with roller support table for wood, aluminum and plastics., cutting height: about 120 mm, cutting width: approx. 80 mm, Roller conveyor length: 350 cm each
Mitre Cold Circular Saw EISELE Type VMS 300 Masch. No. 4615 Type No. 4110 3M 0002 Year of construction 1995 Sawing range at 90 (round) 100 mm sawing range at 90 (flat) 120 x 80 mm sawing range at 45 (round) 90 mm sawing range at 45 (flat) 80 x 80 mm saw blade diameter 300 mm Saw blade speed 40 / 80 rpm. 2 stages mitre cut +45 to 90 to -30 motor power 1 and 1.2 kW mains connection 400 volts, 50 Hz - coolant device - mounted saw blade approx. 270 mm Space requirement L x W x H 700 x 700 x 1600 mm Weight 212 kg very good condition; used