- Air cleaner plants (1)
- Barking machines (7)
- Central heating installations (17)
- Charging plants (16)
- Chip exhaust installations (2)
- Clean air extraction units (3)
- Combi-machines (43)
- Creel (2)
- Double-end tenoning machines (8)
- Extraction Systems (84)
- Filtering units (1)
- Gang saw systems (5)
- High-speed clamping carriages (1)
- Hydraulic trimmers (2)
- Lathes (21)
- Lifting devices (14)
- Macerators (12)
- Mitre joining machines (2)
- Mitre punching machines (2)
- Pallet lines (8)
- Remote-controlled carriages (1)
- Resawing machines (2)
- Scraper conveyors (1)
- Shredder (30)
- Suction units (8)
- Transportation belts (10)
- Wood crushing machines (27)
- Wood shredding systems (22)
- Wood turning lathes (8)
- Woodturning lathes (12)
- more
- A. COSTA (1)
- A. V.D. LINDEN (1)
- ABB (2)
- ABH (1)
- ACETI MACCHINE (1)
- ACKERMANN (1)
- ACM (1)
- ADDA (1)
- ADOLF ALDINGER (1)
- AEG (1)
- AIGNER (2)
- Aircraft (3)
- AIRCRAFT AIRSTAR (1)
- AIRHEAT (1)
- ALFA THERM (1)
- ALFARO (1)
- Alko (5)
- ALLGAIER (1)
- ALMAB (1)
- ALTENDORF (1)
- Alu (3)
- AMANO (1)
- ANGELO CREMONA (1)
- ARTRONIC ELEKTRONIC (1)
- ASTRA ASPIRAZIONI DUE (1)
- ATLAS (1)
- ATLAS COPCO (1)
- AUTOMATIC BOARD STACKER (1)
- AVIC ZEMIC (1)
- AZETA (1)
- Babcock (2)
- BACCI (2)
- Bajler Zembrod (2)
- BALDUF (2)
- BALESTRIERI (1)
- BALESTRINI (1)
- BANO (1)
- BAR GAR (1)
- Barbaric (2)
- BARTH (1)
- Bartling (3)
- Bauerle (2)
- BAUMANN (1)
- BöSCH (1)
- BECKER (2)
- BENTELE (1)
- BENZ (2)
- BERNARDO (1)
- BERTRAM (1)
- BESCHLAGWAGEN KOMMISONIERUNG (1)
- BEZOMBES (1)
- BI-MATIC (1)
- Biesse (8)
- BISON (1)
- BLUM (1)
- BLüMLINGER (1)
- Boere (7)
- Bohm und Kruse (2)
- BOSCH (1)
- BOSITICH (1)
- BOY (3)
- BRANDT (26)
- BRAUN (1)
- BRENTA (1)
- BROTHER (3)
- BRUECK (4)
- BRUKS (3)
- BRUKS-KLöCKNER (1)
- BUHLER (1)
- BURNERD (1)
- BUSELLATO (2)
- CABO (1)
- CALZONI / SPERRY VICKERS (1)
- CAMAM (4)
- Cambio (2)
- CASADEI (6)
- CASATI MACCHINE (1)
- Casolin (4)
- CAT BLOWER (1)
- CATTINAIR (3)
- CAUL (3)
- Cefla (2)
- Cehisa (2)
- Celaschi (2)
- CENTAURO (5)
- CERAMETAL (1)
- CERVIA (1)
- CFMG (1)
- CICAR (1)
- CIT-MECCANICA (1)
- CKM (1)
- CLAAS (1)
- CMC (1)
- CML (1)
- CNC-STEP (4)
- CO.MA.FER (1)
- COLAR (1)
- Colombo (2)
- COMAFER (1)
- COMEC (4)
- ... more
Manufacturer:
(Category: 209)
New in: 1955
used
lighter turning machine originally built for the production of spinning wheels, suitable for the production of individual pieces up to a maximum length of approx. 90 cm. Multiple speeds possible by folding the belt. Electrics renewed. (Luminous flux connection with plug.) With some different shots and tips, like a set of 3 turning irons.
New in: 1963
used
Planer blade sharpening machine Meinert with built-in Cabinet apparatus for gang saws weight approx. 350 kg Built in 1963 L x W x H 80 x 60 x 140 cm The machine is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
New in: 1966
used
Veneer scissors, veneer punch, fine cutting machine, fine cutting scissors, veneer package scissors-Manufacturer: Josting, veneer scissors type EFS 3200-Cutting width: 3200 mm-Stop: max. 725 mm-Insertion height: approx. 80 mm-Hydraulic unit: Power 4 KW-Dimensions: 4320/1600/H1800 mm-Weight: 3160 kg ... more information
New in: 1972
used
Sell an Adol Aldinger combi machine consisting of sliding table saw, side milling machine and slotted hole drilling machine.Footprint with unfolded table and stop extensions, width 2m; Depth 2.7m, height table top 1m The saw comes with a side, longitudinal stop and an angle ruler. The cross stop is about 1.5m, with the screwed-on extension. The max saw blade through, esser is about 400mm The shaft for the saw blade has a diameter of 30mm. The sliding carriage can be swept off and has a movement of 1.5m. The whole carriage can be moved in the slotted holes about 40cm. The height of the saw blade can be adjusted by means of a hand crank. The table can be tilted continuously by 45° by means of a crank. The side milling machine is equipped with 2 Spindl shafts. Diameter 30mm Length about 180mm and 140mm. The height of the slotted hole drilling agreggat can be adjusted. The table ...
New in: 1973
used
Kettenstemmer Müller Wall mounting L x W x H: 60 x 40 x 170 cm Weight approx. 270 kg Built in 1973 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
New in: 1975
used
tahlkonsole with height adjustable table Table 720 x 500 mm, thickness 8 mm Weight 20 kg Built in 1975 The console is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland
New in: 1976
used
250 € Description: No.: 8204 Output: 30,000 kcal/h , (approx 35 kw) Air output: 2,400 m³ Approx. Onsite Dimension. (l x w x h): 1,700 x 1,200 x 1,700 mm, weight approx.: 700 kg ... more information
New in: 1977
used
Specifications: Width: 500 mm Length approx.: 5300 mm Make: Unknown Year of construction: 1977 ... more information
New in: 1979
used
Cross conveyor (QFM) for logs and models Distance between axles : 5.0 m Number of strands: 3 pieces Drive power : 7.5kW - Transport by means of heavy link chains and steel sprockets - Steel bearing housing - Driven by a special geared motor - Swivel wheels can be clamped separately - Wear rails on chain carriers - Substructure: Sectional steel construction -uphill - with hipped roof drivers Year of construction 1979 Revision year 2014
New in: 1979
used
Number of arms: 3 pcs. max. lifting capacity: 2 t - with heavy-duty storage arms - Arm lift and adjustment by hydraulic cylinder - Substructure in heavy steel construction Year of construction 1979 Revision year 2014 ... more information
New in: 1979
used
Power: 11kW, rotational speed: 1450/min. ... more information
New in: 1979
used
Installed in roller table ame899 Distance between axles : 1.96 m Number of strands : 4 pieces Drive power : 2.2 kW - Can be integrated into driven roller conveyor - Transport of the cut material by link chain chain and screwed-on drivers - Driven by geared motor - Chain carrier made of profiled steel Year of construction 1979 Revision year 2014
New in: 1980
used
200 € Description: Machine number: 44 Speed range: 1500/3000 rpm Center width: approx. 900 mm Center height: approx. 200 mm With accessories as shown in the picturesApprox. Onsite Dimension. (l x w x h): 1,830 x 720 x 1,600 mm, weight approx.: 500 kg ... more information
New in: 1980
used
400 € Description: Type: probably ATPK140/1331 Machine number: 10 Spindle speed range: 1000 - 5500 rpm Center distance: approx. 1300 mm Center distance on the smaller bed: approx. 1000 mm Center height (large bed): approx. 260 mm Center height (small bed): approx. 115 mm With accessories as shown in the pictures With hydraulic feed for chiselApprox. Onsite Dimension. (l x w x h): 3,200 x 800 x 1,450 mm, weight approx.: 2,000 kg
New in: 1981
used
Debarking machine type cambio 75 6-arm air ten rotor approx. 8 years old. Machine in good condition. The machine has been completely overhauled in 2007 and can be visited at any time or expanded from the existing log yard. Plant with indentation and centering system and extract roles work. ... more information
New in: 1981
used
complete debarking plant Matelest, including mechanisation and control station. Type EM90 Infeeding up to 40 m/min. Motor 37 kW Log diameter 100-900 mm 4 hard netal knifes Continiursly reconditioned. Very good condition. ... more information
New in: 1981
used
Power 3Kw Speed 2800 rpm Air volume 1000-3500Nm3/h Total pressure difference 1000-400 N/m3 Hdqibj2 Several suction pipes, trouser tubes, etc. ... more information
New in: 1982
used
Castle admission machine Drilling group, Kettenstemmer, Stulpfraese with turret stop for doors in left-right execution. L x W x H: 100 cm x 60 cm x 220 cm Built in 1982 Weight approx. 400 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
New in: 1983
used
Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow: 10,000 m³/h -Total pressure: 3500 Pa -Connection input: Ø 350 mm -Connection output: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg ... more information
New in: 1983
used
WOOD HER TYPE 1117 built 1983 0.55 / 0.75 kW (380V / 16A plug) 3-rolls (new) 8 speeds 4 / 6 / 8 / 10/ 12 / 15 / 20 / 30 m/min. from location ... more information