used KRAUSSMAFFEI for sale

Screw diameter; 105 mm Injectable volume: 3611 cm3 Injection pressure: 1580 bar Column width: 1000 x 930 mm Minimum mould thickness: 600 mm Opening stroke: 1150 mm Cores: 6 Robot Interface: Yes Options: Robot Interface 20 mold heating zones Sequential Injection

warehouse no.: 503244 manufacturer: KRAUSS MAFFEI type: KM 200-1000 CX controller: MC5 year of construction: 2010 operation hours: 47472 h clamping force: 2000 kN distance between tie bars h x v : 560 x 560 mm size of mould plates h x v: 915 x 915 mm min. mould height: 350 mm max. open daylight: 1050 mm opening stroke: 700 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar measures of machine lxbxh: 5.5m x 2m x 2.3m total weight: 11500KG equipment included: screen text german CEE-socket 16A Machine without Handling machine without material hopper Anti vibration mounts interface EUROMAP 67 wear-resistant injection unit

warehouse no.: 503243 manufacturer: KRAUSS MAFFEI type: KM 250-1400 CX controller: MC5 year of construction: 2010 operation hours: 54872 h clamping force: 2500 kN distance between tie bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar measures of machine lxbxh: 6.1m x 2.2m x 2.3m total weight: 15000KG equipment included: screen text german CEE-socket 16A pressure accumulator for uprated injection speed Anti vibration mounts interface EUROMAP 67 wear-resistant injection unit

warehouse no.: 503156 manufacturer: KRAUSS MAFFEI type: KM 160-1000 PX controller: MC6 year of construction: 2018 operation hours: 9585 h clamping force: 1600 kN distance between tie bars h:: 520 mm distance between tie bars v:: 470 mm size of mould plates h: 710 mm size of mould plates v: 660 mm min. mould height: 200 mm max. mould height: 500 mm opening stroke: 950 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included screen text german pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs air valve 2x machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 interface for temperature control units interface USB wear-resistant injection unit mould heating 24x measures of machine lxbxh: 6.7m x 1.6m x 2.3m total weight: 10900KG ...

Specifications: Clamping force: 1100 kN Clamping plate: 745 x 770 mm Installation height: 300 mm Panel spacing: 900 mm Screen text: German Control: MC4 Spray side Screw diameter: 35 mm Displacement: 156 cc Spray pressure: 2429 bar Dimensions: 4.30 x 1.50 x 2.20 m Pump drive power: 18.5 kW Oil filling: 345 l Total weight: 5,8 to Paintwork: RAL 9002/5002 Other: 3-fold core pull, air valve 1-fold, ejector plate protection, tool hot channel 6-fold, pressure accumulator, low-wear plasticization, water battery 8-fold, Euromap 12 interface, machine shoes, complete documentation

Doors for KraussMaffei injection molding machine. Good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (pai ...

Oil cooler from KraussMaffei, model UKTM. In good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Approx. Onsite Dimension. (l x w x h): 4,200 x 1,600 x 2,500 mm, weight approx.: 3,000 kg

Approx. Onsite Dimension. (l x w x h): 4,000 x 1,800 x 2,500 mm, weight approx.: 3,000 kg

Description: Machine number: 44314 Operating voltage: 400 V Frequency: 50 Hz Rated current: 50 A Closing force: 50 to Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 2,000 mm, weight approx.: 3,000 kg

Description: TrimStar The TrimStar is a very compact punching machine with integrated mold that has combined the functional principles behind the CutStar (bottom mold rotation) and the TrimStar Eco (top mold vertical stroke). Approx. Onsite Dimension. (l x w x h): 2,800 x 2,900 x 3,400 mm, weight approx.: 16,000 kg

Description: TrimStar The TrimStar is a very compact punching machine with integrated mold that has combined the functional principles behind the CutStar (bottom mold rotation) and the TrimStar Eco (top mold vertical stroke). Approx. Onsite Dimension. (l x w x h): 2,800 x 2,900 x 3,400 mm, weight approx.: 16,000 kg

Description: TrimStar The TrimStar is a very compact punching machine with integrated mold that has combined the functional principles behind the CutStar (bottom mold rotation) and the TrimStar Eco (top mold vertical stroke). Approx. Onsite Dimension. (l x w x h): 2,800 x 2,900 x 3,300 mm, weight approx.: 16,000 kg

Description: TrimStar The TrimStar is a very compact punching machine with integrated mold that has combined the functional principles behind the CutStar (bottom mold rotation) and the TrimStar Eco (top mold vertical stroke). Approx. Onsite Dimension. (l x w x h): 2,800 x 2,900 x 3,300 mm, weight approx.: 16,000 kg

Closing force: 1500kN, screw diameter: 60mm, stroke volume: 622cm³, opening stroke: 900mm, installation height: 300/600mm, weight: 7.6t, an inspection is possible.

Clamping unit: approx. 26000kg, injection unit: approx. 15000kg, max. total weight of the mold: 11400kg. Hydraulic oil: (2010dm³) approx. 1800kg. Dimensions X/Y/Z: approx. 10000mm/2650mm/2450mm.

There is a complete pultrusion line with three Krauss Maffei RimStar Nano pumping machines, three creels, ABUS column-mounted slewing jib crane and a KraussMaffei EW 2300 CFI winder, tensile force: 10t, max. profile dimensions: 300x50mm, max. speed: 4m/min, on-site inspection is possible.

thermosetting injection molding machine - BMC, included in the sale are 2 pcs Tool-Temp TT-162-E temperature device, LRX 250 manipulator, conveyor, vacuum pump Busch R5 RA 0025 F 503, possibility of conversion to thermoplastic

1K 65 Tons Min Mould height - 260 Max Moul Height - 400 distance btw columns - 400 opening stroke 730 valve gates - 1 Max Shot Weight - 142