subcategories
(3rd category level)
Manufacturer:
(Category: 409)
Feeder Buhrs HF 4; good condition; cleaned and tested, new belts; Format max.310x310x80mm, min.80x50mm; Speed 150m/min; Incl. Compressor. Feeder Buhrs HF 4; good condition; cleaned and checked; new belts; size max.310x310x80mm, min.80x50mm; speed up to 150m/min.; incl.compressor. ... more information
Pick and place Servo feeder Herzog+Heymann/Sigma; good condition; maintained and tested by Sigma Customer Service; Format max.200x150mm, min.50x50mm; Material thickness 0.1-6mm; High-speed version up to 18,000/h Pick and place servo feeder Herzog+Heymann/Sigma; good condition; checked by the support of Sigma; size max.200x150mm, min.50x50mm; thikness 0.1-6mm; high speed version up to 18.000/h.
Ishida QX1100 Flex Tray Sealer Fully automatic tray sealer. Twin lane configuration Suitable for mass production lines Has been packing layered salads in round bowls. ... more information
Ross Industries A10 Tray sealer Serial: 406 2011, stainless tray sealer, modified atmosphere or seal only, up to 10 trays per min, seals two tray at a time, tray dims 200mm x 160mm, adjustable temp and timer controls, 3Ph ... more information
Banding machine BVM 16040 L; good condition; Welding width 1600mm; Product height 400mm; product scanner; Labeller; Conveyor belt 5600mm; Intermediate belt 1500mm; Shrink tunnel SC 16060 SD; Link band; cooling fans; Outlet roller conveyor 2000mm. Banderoling machine BVM 16040 L; good condition; sealing width 1600mm; product hight 400mm; scanner; Labeler; infeed belt 5600mm; intermediate belt 1500mm; shrink tunnel SC 16060 SD; link belt; cooling unit; Outfeed Roller Conveyor.
Gross bagging scale with e = 50 g for open bags with stainless steel double screw feeder 55 - SS (2 x 1.2 kW, for coarse and fine current), one-piece rubber filling nozzle, evaluation unit Speedac 7, pneumatic sack clamp, vent device with 2 vacu probes (swivelling), rietschle vacuum pump and switch cabinet. Air consumption: 30 NL/weighing, amount of aspiration air: 6 m3/min.
Bagging scale (sensitivity = 50 g) for open bags with stainless steel double feeding screw 55 - SS (2 x 1,2 kW for fine and coarse stream), rubber filling nozzle, evaluation unit Speedac 7, pneumatic bag clamp, deaeration device with 2 vacuum probes (swiveling), Rietschle vacuum pump and switchgear. Air consumption: 30 NL/weighing process, aspiration air volume: 6 m³/min.
Ilpra Tray sealer Model: Speedy H240 Serial: FP9858 2014, stainless automatic inline tray sealer, previously used for sealing 250mm diameter tubs, two filling heads on infeed section, with HMI screen controls, 3Ph ... more information
We offer 3 pieces of webbing Strap width at all is 350 mm Belt lengths: 1300 mm, 1500 mm, 2000 mm Price per volume 1500,- â‚ ... more information
Semi-automatic pallet wrapper S 140 Semi-automatic pallet wrapper Foil elongation adjustable by mechanical brake Gentle start-up and outlet of the turntable by means of frequency converter Four different winding programs are available: 1. Manual 2. Single spiral winding, 3. Cross spiral winding 4 Cross spiral winding with cover sheet Automatic height scanning of the pallet by light barrier Separate adjustment of the number of head and foot windings Precise turntable positioning through fixed-stop Load capacity of the turntable 1,200 kg Turntable diameter 1,500 mm max. winding height 2,100 mm (without hold-down) Turntable speed adjustable from 5 to 12 rpm. max. pallet dimensions: 1,200 x 800 mm (L x W) Voltage: 230 V 1 Ph, 50 Hz SPINNY S 140 can be easily tailored to customer-specific requirements and can be equipped with numerous additional features. Some examples: tur ...
Pallet wrapper ROTAX S3200 Electro-magnetic foil brake. In the standard version, the machine is used to protect palletized loading units of max. 1200 mm length, 1200 mm width with stretch film. The standard winding column is available for winding heights up to 2100 mm, on request, the winding height can be increased up to 3000 mm. The rotation speed is adjustable from 4 to 15 rpm The drive of the film carriage is also frequency-controlled and allows the up and down speed of the film carriage to be adjusted separately. The PLC control and additional control board offer ten winding programs, which can be estimated by password. Foil carriage protected by safety gear TECHNICAL CHARACTERISTICS ROTAX S3300 Driven pre-stretching system UP TO 300% In the standard version, the machine is used to protect palletized loading units of max. 1200 mm length, 1200 mm width with stretch f ...
Built in 2001 Capacity single straps up to 40 straps/min Capacity parallel straps up to 20 straps/min Capacity cross straps up to 18 straps/min Size packaged good width max 450 mm min 200 mm Size packaged good length max 320 mm min 200 mm Size packaged good diagonal max 560 mm Size packaged good width single/parallel max 580 mm min 180 mm Size packaged good height max 400 mm min 10 mm Strap Polypropylenband width 5 mm Thickness min 0,35-0,55 mm Reel bead wire diameter 200 mm Reel external diameter app.450 mm Width 160/180/200 mm Electric supply 400/50 V/Hz Weight 510 kg (approx.) Equipment cross strapping with integrated turn table ; working condition
Built in 2004Capacity single straps up to 40 straps/minSize packaged good width max 580 mm min 180 mmSize packaged good height max 400 mm min 10 mmEquipment cross strapping machine 2003 HSinline strapping machine 2003 I; working condition ... more information
Built in 2005 Capacity up to 35 pallets/h Film width 500 mm Max diameter 260 mm Core diameter max 76 mm Film thickness 17-30 mµ Equipment infeed belts delivery belt ... more information
HALOILA Film wrapper Model no.: Octopus T200 Manufacturing year: 2015 Maximum power: 20 kW Full load current: 45A Voltage: 3400VAC Frequency: 50Hz Max short circuit current: 6kA ... more information
Pester PEWO-fold 1 overwrapping machine for single cartons and carton collations, in OPP-, PVC-, PE-materials, with foil width from 90 mm to 300 mm, film thickness from 0.02 mm to 0.05 mm, maximum roll diameter 350 mm. Size range min. 60 x 60 x 20 mm, max. 400 x 350 x 140 mm, Machine controlled using ELAU/Schneider PacDrive, Electrical connection 3x400V, V+N+PE/50-60 Hz, connected load 5.2 kW/12.5A, Operating pressure 4 bar, compressed air 4 to 10 bar. Infeed height approx. 900 mm, outfeed height approx. 900-950 mm. Output up to 60 cycles/collations per minute. Includes: Infeed conveyor, 1100 mm long x 260 mm belt width, outfeed conveyor, 2000 mm long x 260 mm belt width, Alpha Compact labeller, PEWO-collect collating table, miscellaneous sets of format parts
Burgener ISPV-3-1100-2 semi-automatic bag welding machine for closing bags made of PE, paper or aluminium laminated, bag width max. 1050 mm, bag protrusion above product min. 120 mm, vacuuming and purging of the bags, machine in mobile execution on wheels, electrics 3x400VAC/N/PE, Leistung max. 1.5 kW, compressed air max. 6 bar, inert gas max. 4 bar, machine floor space approx. 2000 x 1590 mm (Depth x Width), machine height approx. 2400 mm, machine net weight approx. 250 kg
Sollas SB250 stretchbander for cartons with 1000mm x 150mm (L x W) exit conveyor, output up to 25 packs per minute. Carton size range min. 60 x 35 x 10 mm (LxWxH), max. 400 x 450 x 200 mm Foil width 100 to 250mm Foil roll diameter max. 280mm Compressed air 4-6 bar ... more information