Manufacturer:
(Category: 212)
Baljer & Zembrod round timber handling, sorting, transport and cutting vehicle - German production - measurement of the length of wood - automatic cutting cycle TECHNICAL PARAMETERS: - diameter max logs 1000 mm - crane outreach max 9200 mm - crane working angle 225" - rotatable head 360 " -Lifting capacity: 2000 mm - 2560 kg 7240 mm - 1680 kg 9200 mm - 1330 kg - truck size 6000x2150 mm - dumper with hydraulic dump on both sides - pump motor power 11 kW - feed motor power 8.6 kW - feed speed 90 m / min SAW HOLTEC FS 121 - log length measurement - working length 1000 mm - hydraulic guide stroke - manual and automatic mode - lifting a log - integrated sawdust extraction 2.2 kW - drum for winding the cable Transport dimensions 12.5 x 2.4 x 2.4 m weight 12000 kg
Suction fan Pipe of 300 mm Engine 4 kW The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Screw air compressor Atlas Copco GA 408 59.586 hours of operation Masch. No. ARP 230-128 Built in 1994 Weight 1.2 to L x W x h: 250 x 130 x 200 cm Fqe3oovyi 8 bar 30 kW 2925 / min 380 V 50 Hz This machine is been serviced annually by Atlas Copco. The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Filter system for ref. No. 235-1659 with bagging device for big bags L x W x H: 500 x 200 x 600 x cm Weight 2300 kg Built in 1999 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Exhaust fan Tube ø 350 mm Fan ø ± 750 mm Engine 11 kW Built in 1995 Weight approx. 190 kg L x W x H: 100 x 80 x 100 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Filter system 14 x 5 filter L x W x H: 3000 x 1280 x 2100 mm With Shaker Built in 1979 Weight 430 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Extractor fan 4 Fagida MD Year of manufacture 2002 L x W x H: 80 x 60 x 80 cm Weight approx. 120 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Suction blowers 11 kW approx. 1200 mm direct drive ... more information
Extraction system L x W x H: 2450 x 1340, + distance pipe incl. engine 1400 x 2900 mm Built in 1988 Weight approx. 400 kg The system can be screwed apart. Disassembly by buyer. The system is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Extraction system with 2 bags Connection ø 160 mm Fan 2,2 kW L x W x H: 200 x 70 x 220 cm Weight approx. 120 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Wood drying chamber Bollmann L x W x H outside: 11.0 x 3,0 x 2,7 m Stack dimensions B x H: 1.5 x 2.0 m Weight approx. 2000 kg Built in 1982 The wood drying chamber is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Strip stacking KUKA industrial robot with device / gripper arm for stacking strips Model robot: KUKA KR 150-2 Construction date: 2007 ... more information
TECHNICAL DATA: 04 roller conveyors mm: 1900 x 6000 01 roller conveyor mm: 3000 x 1200 ... more information
TECHNICAL DATA: Dimensions mm: 3500 x 2000 x 2240 H Panel dimensions mm: Length mm: 1800-2280 Max width mm: 80 Capacity Kg: 100 Speed mt / min: 38 Height min. loading / unloading mm: 250 Height max. loading / unloading mm: 1500 Grip type: Suction bar ... more information
Upon purchase, full maintenance of the machine is carried out ... more information
SPECIFICATIONS: Filter station for wood chips Air flow rate: 7,500 m3/h Number of cotton filter bags: 48 - Ø mm 200 Height mm: 2500 6 bags: diameter mm 500 6 Atex panels 1 vibrator for vibrating hoses KW 11.0 Fan Complete with: - Inspection door - External staircase - Filter room -Piping
Technical data lift: Band length: 1200 mm Belt width: 1000 mm Working height of the lift adjustable (870 mm) Load: 50 kg Speed: 40m/min Motor power: 0.37 KW Effective stroke: 500 mm Drive power: 3 KW Operating voltage: 380V, 50Hz Control voltage: 220V AC Weight: 1100 kg Paint RAL 7016 anthracite Technical data return conveyor belt: Belt length: 3000 mm Strap width: 300 mm External width: 450 mm Height: adjustable +/-30 mm 850 – 950 mm Load: 50 kg Speed: 40m/min Motor power: 0.37 KW The system is very well suited for workpieces that are e.g. made of a Multi-blade saw, grinding machine with height-adjustable table or a thickness planer, to the operator Attributed.
I sell a cargo loader suitable for industry, for example in wood industry, painting elements or material manipulation etc. Model: Makor ACR/2 Year of construction: 1990 Manipulazion in 90° from Quär- to parallel direction Element length from 1500mm Thrust with electric motor Speed adjustable with gearbox. Fully operational. Available the same. 2 pcs in stock.