sheet metal working used for sale

VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg

Press brake TRUMPF TrumaBend V 85 Year of construction 1999 Machine specifications: working length 2050 mm - Stand passage 1750 mm - pressing force 850 kN - Distance table / plunger 410 mm - Stand projection 410 mm - Plunger stroke 285 mm - Lifting speeds - Downward speed rapid path 200 mm/sec - Upward speed 135 mm/sec - Downward press speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx.B 3700 x H 2700 x D 2100 mm - Weight approx. 8000 kg

Double gantry longitudinal seam welding machine Oerlikon/Cloos Year of manufacture: 2011, Retrofit 2019 Working range: welding length 32,000 mm, Ground chassis incl. ball bearing Travel: 32,000 mm Travel speed: 0.3-5.0 m/min Chassis dimensions: approx. 2,600 x 4,900 mm Track gauge: approx. 2,000 mm Platform incl. lifting column Stage dimensions : approx. 3,000 x 4,800 mm Total height: approx. 7,000 mm Rail height: approx. 420 mm Swivel range: +/- 90° Travel height: 3,200 mm Boom arm: 5,200 mm, Double gantry with two chassis and burner carriage 2x Cloos 600A welding machines The machine is capable of welding both transversely and longitudinally, as well as round seams in conjunction with a roller-turn device or a tilt-and-turn table. The travel distance of the system can be extended by adapting the rail system and energy chain on site.

CNC firing and drilling system STAKO Novum Year of construction: 2010 Working area: 4,000 mm x 2,000 mm 1x Plasma Power Source with Hypertherm HPR400 1x oxy-fuel torch 1x drilling unit up to 20 mm including tool changer  ... more information

Press brake TRUMPF TrumaBend V 230 Year of construction: 2003 Working width: 3,000 mm Pressure: 230 To Stroke: 365 mm Operating pressure: 305 bar Delay time: 95 ms Safety distance: 190 mm Weight: 18.210 kg Voltage: 3 x 400 V Nominal current: 68 A Frequency: 50 HZ Connected load: 27.2 KVA Compressed air: 6 BAR Stop: 2 x X, 2 x Z, 2 x R – Axis, 2 x Y 1x sliding matrix

Pneumatic Sheet Metal Shears Gabro PGN 32 Thicknesses max Alu 4.8 mm Steel 3.2 mm Stainless steel 2.5 mm  ... more information

Extra Accessories: SheetMaster Sheet Metal Supplier The machine is also working at the moment Make: Trumpf Type: Trumatic 6000L Year of construction: 2006 Hours: 90,119 Travel – x – 3085 mm Travel – y – 1550 mm Travel – x (combined) – 2500 mm Cutting capacity for mild steel – 8 mm Cutting capacity for stainless steel – 6 mm Cutting capacity for aluminium – 4 mm Workpiece – 230kg Punching force - 180 KN Punching speed – 917 1/min Watt laser power: 2700 Dimensions (LxWxH): 8400x8500x2200 mm

working width: 2000 mm for sheets up to: 3 mm Clear stand width: 2050 mm Stand discharge: 250 mm Support table size: 220 x 2200 mm electr. Drive: 380 V, approx. 5 kW Weight: 2.7 t  ... more information

Travel (X/YZ): 3,048 x 1,524 x 150 mm, Cutting head with 5 ́ / 7.5 ́ and 9 ́ lens, sheet metal detection, Laser CV5000 Pallet changer Fabr. Prima Power/OMS Sordella, max. 3,300 kg Extraction system, Fabr. Donaldson, Type 2DFP4-SPRK, 2,400 m³/h, Refrigeration system, Fabr. Hyfra, type sigma 67-S Control Prima Power NC Expressw e³ Laser Classic, YOC 2018,

Plasma cutting machine MESSER Metalmaster Year of manufacture: 2005/2018(Retrofit) Cutting area: 1,500 x 6,000 mm Plasma Power Source: Hypertherm HPR 130 Accessories: extra slag trays  ... more information

Water Cutting Machine FLOW WMC2-DWJ3 Type: Flow WMC2-DWJ 3020-SCC-2P-DCF-LP-1xUP-100iD Year of construction: 2006 Working area: 2,000 x 3,000 mm, Pump: 6000 bar 2x cutting heads with angle correction. Digital drive system, Dynamic Waterjet Axis System, Precision mounting of the cutting head with quick-release device, PaserShield, FLOW abrasive jet cutting system PASER® – Dynamic Waterjet version, FLOW abrasive jet cutting head PASER ECL Plus, FLOW abrasive dosing system PASER, FLOW abrasive storage and conveying system PASER, FLOW WaterVeyor abrasive sludge removal system, tapping aid FLOW UltraPierce, and more. Machine Specification Gross workpiece support: X-axis: approx. 3,100 mm bridge Y-axis: approx. 2,100 mm base axis Net cutting surface with one cutting head: X-axis: 3,000 mm bridge Y-axis: 2,000 mm base axis Net cutting surface with two cutti ...

TRUMPF TruLaser 3030 laser cutting machine was built in 2009 in Germany. The machine designed for cutting workpieces made of steel or aluminium, is ideal for any production facility where precision and the quality of the manufactured parts are the highest priority. The workpieces are machined by an extremely powerful laser beam which, in combination with extensive equipment, allows for rapid cutting of thin sheets with a thickness of up to 1.5 mm. This ensures that the finished workpieces have perfectly smooth and even edges, regardless of the machined material. The offered equipment includes an easy-to-use SIEMENS SINUMERIK 840D CNC controller with 500 MB memory for NC programmes, a table with hydraulic pallet changer and three cutting heads. The TRUMPF TruLaser 3030 Basic Edition laser cutting machine weighs 10500 kg. Technical specifications of the TRUMPF TruLaser 3030 laser - max ...

Specifications: Wire ø: 0.05 - 16 mm Wires: 1 Max. feed stroke per MV rotation: 100 mm Teilelänge_ 5 - 6000 mm pcs/min: max. 2000 Equipment: - PLC controlled - Knife cut -Soundproofed - Also for cutting tungsten wire  ... more information

DURMA MS 2004 guillotine shears were built in 2008 in Turkey. The machine, characterised by the application of many facilities and modern solutions, guarantees precise and efficient machining of, among others, stainless steel, aluminium, copper and plain steel. A sheet metal with a maximum thickness of 4 mm is fed through ball transfers built into the work table, whose design protects the surface of sensitive materials from scratches and nicks. All machining process parameters are programmed on the intuitive DURMA ENC-100M control panel with a clear LCD display and memory for 50 programmes. During the cutting process, the rigid design of the machine ensures that sheet deformations are within tolerance, making both the workpiece and the cut-off ready for further machining. The DURMA MS-2004 mechanical guillotine shears are offered with direct drive, high-quality cutting knives with adj ...

ALIKO SP4200-220 220 t CNC hydraulic press brake was built in Finland in 2006. Specially designed and perfectly optimised for even the most intensive bending, the machine has 220 tonnes of press force and a slider with a stroke of 900 mm, enabling the efficient production of large, non-standard parts. All this, combined with a stable design and low energy consumption, makes the ALIKO CNC 220-4200 CNC press the best choice among other press brakes available on the market. The offer additionally includes adapters and carriages for removing the adapters. The total weight of the machine is 21500 kg. Technical parameters of the ALIKO SP4200-220 press brake - CNC controller: CYBELEC ModEva 10S (support of 18 different languages including Polish) - press force: 220 t (2200 kN) - maximum workpiece length: 4200 mm - slider stroke: 900 mm - maximum tool weight: 1500 kg - response time: 10 ...

DENER DMP 3100/200 SMART CNC press brake was built in 2007 in Turkey. The machine, distinguished by its extremely stable construction, high press force of 200 tonnes and excellent precision, is the ideal choice for even the most intensive machining in any production facility. To further improve the machining process, all parameters are programmed in the intuitive CYBELEC DNC 60 CNC controller with many useful functions. The total weight of the machine is 10500 kg. Technical data of the DENER DMP 3100/200 SMART press brake - CNC control: CYBELEC DNC 60 - maximum press force: 200 t - maximum workpiece length: 3100 mm - WILA hydraulic top and bottom tool clamping - motor power: 15 kW - maximum pressure: 290 bar - oil tank capacity: 150 l - weight of machine: 10500 kg

BYSTRONIC ByStar L 4025-65 6 kW laser cutting machine built in 2018 in Switzerland is designed for precision cutting of among others carbon steel, stainless steel and aluminium. The machine uses a stable 6 kW laser beam with a thickness of just a few μm to achieve excellent processing results in the form of extremely even and smooth edges along the entire length of the workpiece. The machining process takes place on a rigid work table with a length of 6500 mm and a width of 2500 mm, which ensures high stability even during the most demanding challenges. During its use, the BYSTRONIC ByStar L 4025 laser cutting machine has been continuously serviced and has original parts. The total weight of the machine is 28900 kg. Technical data of the BYSTRONIC ByStar L 4025-65 laser - laser beam power: 6 kW - work table dimensions (L x W): 6500 x 2500 mm - workpiece thickness range (plain stee ...

TRUMPF TruLaser Cell 7040 3D laser built in 2015 in Germany is the ideal solution for versatile cutting, welding and laser metal deposition (LMD). For all these tasks, the TRUMPF 3D laser cutting machine uses the TruDisk 4001 semiconductor laser and a specially designed 3D head with 5 axes, which can machine not only flat workpieces, but also tubes, closed profiles and very complex shapes. All of this makes this extremely technically advanced machine capable of tackling any challenge in the broad field of automotive engineering. The workpiece placed on one of two work tables is machined by an extremely stable laser beam with a power of up to 4 kW. During machining, the head moves in the three-dimensional cartesian coordinate system and rotates in two axes in the polar coordinate system. This is what gives the universal 3D laser its extraordinary quality and precision, impossible to ac ...

BYSTRONIC BySprint 3015 laser cutting machine was built in 2006 in Switzerland. Designed for even the most intensive machining, the machine uses an extremely stable 3 kW laser beam, whose excellent parameters ensure the highest energy efficiency while maintaining low operating costs. Additionally, in order to meet any production challenges, the process of loading and unloading the workpieces can be performed during the cutting process, which significantly increases production efficiency and reduces machine downtime to a minimum. The offered BySprint 3015 laser cutting machine has been regularly serviced and its total weight is approximately 12000 kg. Technical specifications of the BYSTRONIC BySprint 3015 laser - laser beam power: 3 kW - laser beam power adjustment range: 150 – 3000 W - work area (L x W): 3048 x 1524 mm - maximum sheet metal dimensions (L x W): 3000 x 1500 mm - ...

DURMA SB 3020 hydraulic guillotine shears built in 2008 in Turkey are an ideal choice for machining stainless steel, copper, aluminium and plain steel. Workpieces with a maximum thickness of 20 mm are cut using extremely precise, hardened cutting knives with manual adjustment of the gap between the blades. The high-quality monoblock design, combined with the hydraulic system, additionally ensures the highest stability and machining performance, even during the most demanding challenges. To facilitate the operator’s work, special transport rollers have been integrated into the work table, on which the workpiece is fed directly under the cutting line. The machining parameters are programmed in the intuitive DURMA ENC 100M control panel with clear LCD display and memory for 50 programs. The DURMA SB 3020 guillotine shears also features a driven back stop with T-slots and sockets with d ...