The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Category: sheet metal working / Guillotine Shears
date: 26.01.2024 add to watchlist
Machine: ARRIETA CGM 10/2 Guillotine Shears
item-No.: 144624171
New in: 2001
used
Price: 8.000 €

Mecanica guillotine shear Arrieta CGM 10/2. Typing clutch. Sheet metal length: 1050mm. Sheet metal thickness: 2mm. Rear stops. Power: 1.5hp. Ce. Year: 2001

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: BOMBLED GTS II Hydraulic Guillotine Shears
item-No.: 163837708
New in: 1996
used
Price: used machinery auction RESALE 3.000 €

Description: 10 mm cutting capacity Cutting length 3050 mm Rear stop capacity 1000 mm Main motor power kW 15 Stroke speed/min 4 - 10 Angle stop, length 1000 mm. Delem DA 310 digital controlweight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 1,800 x 2,000 mm

Category: sheet metal working / Guillotine Shears
date: 22.04.2024 add to watchlist
Machine: BOSCHERT G CUT 2504 CNC Guillotine Shears
item-No.: 158874014
New in: 2014
used
Price: 18.810 €

BOSCHERT G CUT 2504 CNC guillotine shears were manufactured in 2014 in Germany. The guillotine is designed for cutting metal sheets with a maximum length of 2600 mm and a thickness of 4 mm (mild steel st42) or 2 mm (stainless steel). The sheet metal is held in place by 13 hydraulic clamps and, thanks to the installed CNC controller with touch panel, it is also possible to store many different work programmes, making the machine very useful and versatile. After entering the parameters of the steel sheet to be cut, the controller automatically sets the cutting gap, choices the angle of the upper knife and the appropriate pressure force and then starts the cutting process. The guillotine is also equipped with, among other things: a foot control to facilitate the operator’s work, light curtains to prevent a worker from entering the working area of the machine and an automatic metal shee ...

Category: sheet metal working / Guillotine Shears
date: 01.04.2024 add to watchlist
Machine: BRG 15/3050 Guillotine Shears
item-No.: 161118700
used
Price: 8.500 €

We sell on behalf a guillotine shears this was fully functional until the site closed. Sheet thickness up to 15mm Sheet length 3000mm Dimensions 3,522m high Weight approx. 10to

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: DARLEY GS 3660 x 16
item-No.: 160004474
New in: 1975
used

sheet width: 3700 mmplate thickness: 16 mmdistance between columns: 3860 mmthroat: 100 mmback stop - adjustable: mmdown holder: 12 Stk.total force of the downholder: 24000 kgoil volume: ca. 500 ltotal power requirement: 30 kWweight of the machine ca.: ca. 11,0 tdimensions of the machine ca.: 4,5 x 2,5 x 2,5 mMax. Sheet thickness stainless steel: 12mmCut gap adjustment: 0-16 mm- Machine has a back gauge adjustable from the front.- cut line lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: DIGEB OL-3x1250
item-No.: 162290088
New in: 1983
used

sheet width: 1250 mmplate thickness: 3,0 mmdistance between columns: mmpower requirement: 2,2 kWdimensions: 3,27 x 1,69 x 1,29 mweight of the machine ca.: 1,6 tused compact mech. guillotine shear- strokes per minute: 50The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Guillotine Shears
date: 17.04.2024 add to watchlist
Machine: DIGEP DLB- 4/3050 Guillotine Shears
item-No.: 148527653
used

Cutting length 3050 mm Sheet thickness 4 mm Engine 7.5 kW Dimensions 3700x1600x1600 mm Weight approx. 4650 kg

Category: sheet metal working / Guillotine Shears
date: 29.02.2024 add to watchlist
Machine: DIGEP HS 6/3050 Guillotine Shears
item-No.: 126750974
New in: 1990
used

Working width: 3050 mm sheet thickness: 6 mm throat depth: back gauge: 650 mm power: 380 V, 16 kW space: 3680 x 2060 x 1870 mm weight: 7580 kg

Category: sheet metal working / Guillotine Shears
date: 09.04.2024 add to watchlist
Machine: DIGEP OL 3 x 1250 Guillotine Shears
item-No.: 163239074
New in: 1977
used

Offer 23443 Specifications: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30° - Cutting gap adjustment by hand - Projection 200 mm - Man.- Back gauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirements incl. back gauge -ca. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg

Category: sheet metal working / Guillotine Shears
date: 22.03.2024 add to watchlist
Machine: DURMA ES 3006 Guillotine Shears
item-No.: 162384055
New in: 2006
used

Working length: 3100 mm Cutting capacity: 6 mm Backgauge range: 750 mm Equipped with: - 3 sheet metal support arms - Rear access protection - Foot pedal Engine power: 11 kW Machine LxWxH: 3750 x 2350 x 1850 mm Machine weight: 5500 kg

Category: sheet metal working / Guillotine Shears
date: 22.04.2024 add to watchlist
Machine: DURMA MS 2004 Guillotine Shears
item-No.: 163534363
New in: 2008
used
Price: 14.265 €

DURMA MS 2004 guillotine shears were built in 2008 in Turkey. The machine, characterised by the application of many facilities and modern solutions, guarantees precise and efficient machining of, among others, stainless steel, aluminium, copper and plain steel. A sheet metal with a maximum thickness of 4 mm is fed through ball transfers built into the work table, whose design protects the surface of sensitive materials from scratches and nicks. All machining process parameters are programmed on the intuitive DURMA ENC-100M control panel with a clear LCD display and memory for 50 programmes. During the cutting process, the rigid design of the machine ensures that sheet deformations are within tolerance, making both the workpiece and the cut-off ready for further machining. The DURMA MS-2004 mechanical guillotine shears are offered with direct drive, high-quality cutting knives with adj ...

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
item-No.: 155678691
new

sheet width: siehe TD mmplate thickness: siehe TD mmdistance between columns: siehe TD mmpre-bending: siehe TD total power requirement: 3 kWweight of the machine ca.: 1,06 tdimensions of the machine ca.: 1260 x 1350 x 1900 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
item-No.: 156886410
new

sheet width: siehe TD mmplate thickness: siehe TD mmdistance between columns: siehe TD mmtotal power requirement: 3 kWweight of the machine ca.: 1,28 tdimensions of the machine ca.: 2600 x 1350 x 1260 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: DURMA MS-2004
item-No.: 156886374
new

sheet width: siehe TD mmplate thickness: siehe TD mmdistance between columns: siehe TD mmtotal power requirement: 7,5 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2700 x 2300 x 1350mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: DURMA MS-2504
item-No.: 155678719
new

sheet width: siehe TD mmplate thickness: siehe TD mmdistance between columns: siehe TD mmtotal power requirement: 7,5 kWweight of the machine ca.: 3,23 tdimensions of the machine ca.: 3200 x 2300 x 1350 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: DURMA MS-2525
item-No.: 156886407
new

sheet width: siehe TD mmplate thickness: siehe TD mmdistance between columns: siehe TD mmtotal power requirement: 3 kWweight of the machine ca.: 1,54 tdimensions of the machine ca.: 3100 x 1350 x 1260mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: DURMA MS-3004
item-No.: 156128991
new

sheet width: siehe TD mmplate thickness: siehe TD mmdistance between columns: siehe TD mmtotal power requirement: 7,5 kWweight of the machine ca.: 3,73 tdimensions of the machine ca.: 3700 x 2300 x 1350mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Guillotine Shears
date: 22.04.2024 add to watchlist
Machine: DURMA SB 3020 Guillotine Shears
item-No.: 163732085
New in: 2008
used
Price: 17.860 €

DURMA SB 3020 hydraulic guillotine shears built in 2008 in Turkey are an ideal choice for machining stainless steel, copper, aluminium and plain steel. Workpieces with a maximum thickness of 20 mm are cut using extremely precise, hardened cutting knives with manual adjustment of the gap between the blades. The high-quality monoblock design, combined with the hydraulic system, additionally ensures the highest stability and machining performance, even during the most demanding challenges. To facilitate the operator’s work, special transport rollers have been integrated into the work table, on which the workpiece is fed directly under the cutting line. The machining parameters are programmed in the intuitive DURMA ENC 100M control panel with clear LCD display and memory for 50 programs. The DURMA SB 3020 guillotine shears also features a driven back stop with T-slots and sockets with d ...

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: DURMAZLAR ES 3006 Plate Shear
item-No.: 163829540
New in: 2007
used
Price: used machinery auction RESALE 6.500 €

Description: Max Thickness: Mild steel: 6 mm , Max Thickness Stainlesssteel: 4 mm , Strokes: 14/min Table height: 880 mm , Table width: 500 mm ,  ,plate thickness: 6 mm, cutting angle adjustment: 1 °, weight approx.: 5,650 kg, Approx. Onsite Dimension. (l x w x h): 1,950 x 3,900 x 1,700 mm

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: DURMAZLAR RGM 1350 X 3 guillotine shears
item-No.: 163569715
New in: 1996
used
Price: used machinery auction RESALE 200 €

Description: Cutting angle <, 2° 35 cuts/min Maschinennummer 313196038plate width: 1,350 mm, plate thickness: 3 mm, total power requirement: 3 kW, weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 1,500 x 1,200 mm

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: DURMAZLAR RGM 2550 x 2,5
item-No.: 161537332
New in: 1996
used

sheet width: 2500 mmplate thickness: 2,5 mmdistance between columns: 2550 mmcutting angle: 1,5 °cutting strokes max.: 35 p.Min.back stop - adjustable: 500 mmtotal power requirement: 3 kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: 2,9 x 1,4 x 1,16 mfoot operated switch: : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: ECLAIR / PASKOWSKY-SCHWEIZ ASS. 5 mm
item-No.: 162958091
New in: 1976
used

sheet width: 3050 mmplate thickness: 5 mmdistance between columns: - mmtable height: 750 mmstrokes per minute until: 25 - 80 cutting angle: 1° 10´ Number of downholders: 16 total power requirement: 11 kWweight of the machine ca.: 4,9 tdimensions of the machine ca.: 3,4 x 2,6 x 1,4 mElectric 380 Volt: Back gauge motorized: 750 mmSquaring arm withh mm-scale: Support arms: 2 x Shadow line lighting: Cutting lenght bound: Foot switch: Hydraulic guillotine shear in a solid all-welded construction with cutting output of 3050 x 5 mm and motorized backgauge adjustable from the front and readable via counter.The cutting performance refers to sheets with a strength of max. 45 kg/mm².Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: EDWARDS 13/3100 HYDRAULIC GUILLOTINE SHEARS
item-No.: 163739292
used
Price: used machinery auction RESALE 3.000 €

Description: Cutting capacity mm 13 Cutting length mm 3050 Stopping capacity mm 750 Main motor power kW 18.5 Speed strokes/min 8-14 Power supply 380 Volts 3 Ph + T + N Angle stop, length 2000 mm. Numerically controlled electric backgauge. Numerically controlled adjustment of clearance between blade and cutting angle.weight approx.: 12,500 kg, Approx. Onsite Dimension. (l x w x h): 3,880 x 1,650 x 2,100 mm

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: EHT TSS 4-15
item-No.: 160990765
New in: 1984
used

sheet width: 1500 mmplate thickness: 4 mmback stop - adjustable: 10-1000 mmno. of strokes: ca. 20 Hub/mincutting angle: 1 °table height: 850 mmtotal power requirement: 8 kWweight of the machine ca.: 3300 kgdimensions of the machine ca.: 2500x2000x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: EHT TSS 6-60
item-No.: 158657982
New in: 1995
used

sheet width: 6000 mmplate thickness: 6 mmdistance between columns: 610 mmControl: Elgo 87 P2total power requirement: 15 kWweight of the machine ca.: 22 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Guillotine Shears
date: 22.04.2024 add to watchlist
Machine: ERMAK CNC HVR 3100 x 13 Guillotine Shears
item-No.: 159550855
New in: 2008
used
Price: 35.695 €

ERMAK CNC HVR 3100 x 13 hydraulic guillotine shears built in Turkey in 2008, are designed for cutting workpieces made of among others mild steel or stainless steel. The metal sheet with a maximum length of 3100 mm and a maximum thickness of 8 mm (plain steel) or 13 mm (stainless steel), is held during machining by 14 hydraulic clamps. The angle of the cutting blade can be freely adjusted in the range from 0.5° to 2.0°. Full control over the operation of the CNC HVR 3113 machine is guaranteed by the control panel located on the guillotine shears body with installed CYBELEC DNC 60 CNC controller, allowing programming of many different machining processes. The guillotine shears is equipped with among others new cutting blades and a foot control pedal, making the operator’s work much more comfortable and simple. The total weight of the machine is 13400 kg. The total weight of the mach ...

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: FASTI 506-10-2,5
item-No.: 158181267
used

sheet width: 1030 mmplate thickness: 2,50 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,00 tdimensions of the machine ca.: mMotorized adjustable rear gauge up to 1,000 mm in 2 speeds withdigital displayPneumatic sheet supportSide stop and table extensionknife sharpenedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: FASTI 506-10-2,5
item-No.: 163481052
New in: 1991
used

sheet width: 1030 mmplate thickness: 2,50 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 0,80 tdimensions of the machine ca.: mManually adjustable back gauge up to 530 mmCutting angle adjustmentSide stop and table extensionKnife sharpenedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Guillotine Shears
date: 14.02.2024 add to watchlist
Machine: FASTI 506-10-2,5 Guillotine Shears
item-No.: 158042506
used
Price: 8.400 €

cutting length: 1030 mm sheet thickness: 2.5 mm steel Motor-adjustable backgauge up to 1,000 mm in 2 speeds with digital display Pneumatic sheet metal holding up Side stop and table extension Knife sharpened Weight approx. 1000 kg

Category: sheet metal working / Guillotine Shears
date: 29.02.2024 add to watchlist
Machine: FASTI 506-10-2,5 Guillotine Shears
item-No.: 163474346
New in: 1991
used
Price: 6.200 €

Max. cutting length: 1030 mm Max. sheet thickness: 2.5 mm steel Manually adjustable back gauge up to 530 mm Cutting angle adjustment Side stop and table extension Knife sharpened Weight approx. 800 kg

Category: sheet metal working / Guillotine Shears
date: 21.11.2023 add to watchlist
Machine: FASTI 507-10-4 Guillotine Shears
item-No.: 160846368
used

Working length:1040 mm Sheet thickness: 4 mm Cutting angle: 1.6° Backgauge: 10 - 750 mm Number of hold-downs: 1 (13000N) Side stop: 70 - 850 mm Travel speed: 90 mm/s Projection (WxH): 20 x 125 mm Weight, ca.:1600 kg Dimensions (WxDxH), approx.: 1850 x 1870 (3120) x 1550 mm Equipment: - Motorized backgauge - Foot control - Emergency stop impact button -Operating instructions - Table widening

Category: sheet metal working / Guillotine Shears
date: 14.02.2024 add to watchlist
Machine: FASTI 525-10-2,5 Guillotine Shears
item-No.: 161297173
New in: 1999
used
Price: 6.700 €

Max. cutting length: 1040 mm Max. sheet thickness: 2.5 mm steel Manual backgauge with hand crank up to 500 mm Side stop and table extensions

Category: sheet metal working / Guillotine Shears
date: 26.03.2024 add to watchlist
Machine: FASTI 527-10-4 Guillotine Shears
item-No.: 163656403
New in: 2004
used
Price: 8.300 €

Max. cutting length: 1040 mm Max. sheet thickness: 4 mm steel Manual backgauge up to 550 mm Side stop and table extensions The rear area is secured by a safety fence with light barriers Knife sharpened Instruction manual available Weight: 1600 kg

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: FASTI A2
item-No.: 157045779
New in: 1980
used

sheet width: 2.100 mmplate thickness: 3 mmdistance between columns: 2.100 mmweight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Guillotine Shears
date: 08.04.2024 add to watchlist
Machine: FASTI TCHE-25/4 Guillotine Shears
item-No.: 157774538
New in: 1981
used

Specifications: - working width 2540 mm - max. cutting capacity St 40 4 mm - mot. Cutting angle adjustment - Cut gap. by scaled adjustment screws - Number of hydraulic holders 14 pcs - Mot. backgauge with positioning. 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per min - Hydraulic drive 400 V / 7.5 kW - Table height 1030 mm - Space requirement approx. W 2500 x H 1630 x D 2150 mm - Weight approx. 3600 kg - with: - Sheet metal holding pneum. supported - front angle stop + support arms - Electronic cutting depth adjustment - Cut line lighting - E-foot switch

Category: sheet metal working / Guillotine Shears
date: 22.04.2024 add to watchlist
Machine: FISCHER K 3/2000 Guillotine Shears
item-No.: 158690816
New in: 1971
used

working width: 2000 mm for sheets up to: 3 mm Clear stand width: 2050 mm Stand discharge: 250 mm Support table size: 220 x 2200 mm electr. Drive: 380 V, approx. 5 kW Weight: 2.7 t

Category: sheet metal working / Guillotine Shears
date: 22.04.2024 add to watchlist
Machine: HACO TS 3006 Guillotine Shears
item-No.: 162443402
New in: 2006
used
Price: 23.335 €

HACO TS 3006 hydraulic guillotine shears manufactured in Belgium in 2006, are used in manufacturing plants to cut steel sheets with a maximum length of 3100 mm and a thickness of 6 mm. The machine has vertically aligned knives with four cutting edges, which ensure high precision and quality machining of workpieces regardless of the thickness and type of sheet. The angle of the cutting knives and the gap between them are adjusted by means of two levers at the rear of the machine. During machining, the workpiece is pressed against the cam in order to take an accurate measurement on the gauge located between the front stop and the bottom knife. Two parallel hydraulic cylinders drive the cutting bar (the upper knife attached to the slider) to perform the movement in the up-down direction. The HACO guillotine shears are offered with equipment which includes a foot control, a modern HACO SP ...

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: HACO TSL 3016 HYDRAULIC GUILLOTINE SHEARS
item-No.: 163739293
New in: 1989
used
Price: used machinery auction RESALE 4.250 €

Description: 16 mm cutting capacity Cutting length 3050 mm Stopping capacity 1000 mm Main motor power kW 30 Work rate strokes/min. 5 to 10 Power supply 380 Volts 3 Ph + T + N Square stop length 1000 mmweight approx.: 14,000 kg, Approx. Onsite Dimension. (l x w x h): 3,880 x 2,220 x 2,550 mm

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: HERBERT NAGEL 52856 Sharpie
item-No.: 163674365
used
Price: used machinery auction RESALE 1.000 €

Description: SPECIFICATIONS Character: Herbert Nagel Type: 52856 Year of construction: 1974 Capacity: 10,000 kg Engine: 3 kW Machine dimensions (L×W×H): 2,500 x 2,500 mm Panel parts: Yesweight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 3,000 x 1,000 mm

Category: sheet metal working / Guillotine Shears
date: 08.12.2023 add to watchlist
Machine: HSK L 1030 x 1,5/2 Guillotine Shears
item-No.: 162924888
used

HSK - Guillotine shears with motor drive: - Engine: Dietz 380-3-50, 2.2 kW - D. Stroke rate 100 p.min - Weight approx. 700 kg - Drive via brake motor - Cutting triggering via movable foot switch - Scissor table with support table widened to approx. 600 mm - Side stop TA 500 with scale - Rear width stop ZA 500 in foldable design - Manual adjustable. For long sheets, stops can be placed upwards. - Fully installed and ready to use Additional: Pneum. Hold

Category: sheet metal working / Guillotine Shears
date: 08.04.2024 add to watchlist
Machine: HÄNGGI AOS 3100-8 Guillotine Shears
item-No.: 159504991
New in: 1968
used

Specifications: - working width 3100 mm - max. cutting capacity St 40 8 mm - Engine backgauge 10 - 750 mm - front angle stop - Stroke rate up to 30 per min - Drive 400 V / 2 x 6.5 kW - Space requirement incl. backgauge, without front support arms - approx. W 4250 x H 1500 x D 2450 mm - Weight approx. 11000 kg

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: INANLAR CNC AHGM 3006 Guillotine Shears
item-No.: 162391901
New in: 2016
used

Inv. Num. : 6950 Type: CNC AHGM 3006 Producer: INANLAR Created: 2016 Parameters: Maximum cutting length: 3000 mm Maximum cutting thickness: 6 mm Main engine power: 11 kW Machine weight: 6300 kg

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: KAPEMA SMP 20-20
item-No.: 161052394
new

sheet width: 2050 mmplate thickness: 2 mmstrokes per minute until: 38 cutting angle: 1,75 °table height over floor: 870 mmtotal power requirement: 3 kWweight of the machine ca.: 1520 kgrange L-W-H: 2,2 x 0,6 x 1,2 mElectric 380 Volt: Back stop with manual adjustment: Shadow line lighting: Foot switch: The new motor guillotine type SMP is a well dimensioned machine withall-welded link guides. The drive takes place with aStandard geared brake motor via a chain connection to the main axle. theKnives are of the highest quality. The optimal cutting angle secures theTogether with the rubber-covered blank holder perfect cuts.Bearings and guides are maintenance and lubrication-free.Standard equipment: • Back gauge 665 with mm scale. •cutting edge lighting. • Section counter. • Table extensions 600 mm. •Right angle stop, left. • Movable 24 V foot switch with emergency stop.• Mo ...

Category: sheet metal working / Guillotine Shears
date: 23.04.2024 add to watchlist
Machine: KAPEMA SMP 20-30
item-No.: 161147912
new

sheet width: 2050 mmplate thickness: 3 mmstrokes per minute until: 35 cutting angle: 2,0 °table height over floor: 870 mmthickness at Niro-steel: 2 mmtotal power requirement: 4 kWweight of the machine ca.: 1550 kgrange L-W-H: 2,5 x 1,57 x 1,21 mElectric 380 Volt: The new motor guillotine type SMP is a well dimensioned machine withall-welded link guides. The drive takes place with aStandard geared brake motor via a chain connection to the main axle. theKnives are of the highest quality. The optimal cutting angle secures theTogether with the rubber-covered blank holder perfect cuts.Bearings and guides are maintenance and lubrication-free.Standard equipment: • Back gauge 665 with mm scale. •cutting edge lighting. • Section counter. • Table extensions 600 mm. •Right angle stop, left. • Movable 24 V foot switch with emergency stop.• Motor protection switch and emergency stop.  ...

Category: sheet metal working / Guillotine Shears
date: 09.04.2024 add to watchlist
Machine: KRAMER TM Ia 1000/3.5 Guillotine Shears
item-No.: 163239064
New in: 1970
used

Offer 23465 Specifications: - Max. working width 1040 mm - max. material thickness (with a strength of 40 kg) 3.5 mm - Table width 300 mm - Stand projection 100 mm - Working height 880 mm - Front angle stop - 3 additional front support arms - Back gauge adjustable by hand 5 - 550 mm - Drive 400 V / 5.5 kW - E.- Footswitch - Space requirements including back gauge, without front support arms -ca. W 1500 x H 1250 x D 1400 mm - Weight approx. 1400 kg

Category: sheet metal working / Guillotine Shears
date: 04.02.2024 add to watchlist
Machine: KRAMER TM II a Guillotine Shears
item-No.: 163289744
used
Price: 5.490 €

Engine. Guillotine Shears Impact Shears Tin Shears Scissors Cutting Manufacturer: KRAMER Model TM IIa 3000x4,5 max. cutting length 3050 mm max sheet thickness at ST 40 4.5 mm Distance between uprights 3050 mm Projection 130 mm Table width 360 mm Strokes per min 30 pcs. Hold-down device 16 pieces Manual backgauge travel 5 – 550 mm Engine power 7.5 kw Machine weight 4000 kg Space requirements: W 3480 mm D 3600 mm H 1400 mm Foot switch Back gauge front support arms Angle stop The machine is in good condition and ready for immediate use. Machine runs very quietly. Forklifts available, freely loaded trucks Cheap shipping possible Location of the machine 48324 Sendenhorst for enquiries 0157-35496006 The price is net plus 19% VAT.

Category: sheet metal working / Guillotine Shears
date: 13.01.2024 add to watchlist
Machine: KRAMER TM II a 4000 Guillotine Shears
item-No.: 160047603
New in: 1988
used

Guillotine shears Manufacturer Kramer Type TM II a 4000 Year of construction 1988 2.5 mmm sheet thickness. Machine is in a used very good condition. With invoice and VAT.

Category: sheet metal working / Guillotine Shears
date: 08.01.2024 add to watchlist
Machine: KÖLLSCHEN BS 100/12 Guillotine Shears
item-No.: 12778725
New in: 1963
used

Working width: 1040 mm sheet thickness: 12 mm rear gauge: hand up to 500 mm power: 380 V, 11 kW space: 2500 x 2150 x 1900 mm weight: 4100 kg

Category: sheet metal working / Guillotine Shears
date: 08.01.2024 add to watchlist
Machine: LOTZE KS 25 Guillotine Shears
item-No.: 12778735
New in: 1965
used

Working width: 2500 mm sheet thickness: 4 mm throat depth: 70 mm rear gauge: 520 mm power: 380 V, 6.3 kW space: 3200 x 2300 x 1270 mm weight: 4600 kg

Category: sheet metal working / Guillotine Shears
date: 07.02.2024 add to watchlist
Machine: LVD HST 3100 X 6,35 Guillotine Shears
item-No.: 163091923
New in: 1988
used

LVD SHEARS 3100 X 6,35 IN AN VERY NICE WORKING CONDITION READY TO USE INCLUDIN SAFETY BACK RAILS FOR CUSTOIMER WE ORGANIZE DISMANTLING LOADIN AND TRANSPORT DOOR TO DOOR.