sieving machines used for sale

Screening drums suitable for all common screening machines such as Doppstadt SM 314 / SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - smallest webs - welded-in spiral - in various material thicknesses - Perforated plates sharp-edged in the highest quality - Perforated plates made of special steel We deliver our drums free of charge. Many models in stock without waiting.

Vibrorinne 2 without drive L x W x H: 5000 x 400 x 100 mm Height 370 mm This vibrorinne 2 can be used with Vibrorinne 1 (Ref. 278-2349). On request, MATEC Vibro drive 1 can be installed. The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Komptech mobile drum screening machine Cribus 3800, year of manufacture 2014 Manafacture: Komptech Type: Cribus 3800 Year of construction: 2014 Connected load: 30 kW Diesel generator: 48 kVA Screening drum length: 6000 mm Screening drum diameter: 2200 mm Revolutions per minute: 20 Throughput: up to 220 cbm/h (depending on material) Transport dimensions: 12000 x 2550 x 4000 mm Weight: 18000 kg Material feed Bunker volume: 5 cbm Feed length: 4000 mm Feed width: 1675 mm Feed height: 2950 mm Material discharge Discharge height coarse fraction (30°): 3500 mm Discharge height fine fraction (30°): 3350 mm Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appoin ...

MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...

ID3166 Doppstadt SM518 S year/Bauahr 1991 6220 hours (acc. Counter)/Hours (according to counter) Drum sieve, Mercedes-engine, brush new, almost new drum with 15 mm mesh size, Additional hydraulics for e.g. magnetic tape Drum screen, Mercedes engine, brush new, almost new drum with 15 mm mesh size, additional hydraulics for e.g. magnetic tape

Resonance screening machine, Screening machine, Vibrating screen, Linear screening machine used Manufacturer: Binder + Co AG TYPE: SL1000GX.6.7 Year of construction: 1999 Sieve: 2 levels each approx. 4.2 x 0.9 m Upper level: Longitudinal grid with approx. 13 mm distance Lower level: plastic screen with approx. 9 x 9 mm mesh size Insertion height approx. 1.5 m Dimensions without drive approx. 6800 x 1700 x 1800 mm Resonance screens are used in the dry and wet screening of round and edge grain as well as leafy materials. They work according to the throwing principle. This machine was used in a glass recycling plant. Changes and errors in the technical data, information and prices as well as prior sale reserved.

Sieb ball mill used, completion and steel construction by arrangement Drum Ø ca. 2700 mm Drum width approx. 1200 mm The substructure can be offered by our own special machine construction. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Allgaier Screening Machine | Vibrating screen type ARSM 33-10 Refurbished (workshop overhauled) - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: refurbished - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Design of the spouts according to customer requirements Screening machine overhauled. Spherical roller bearings and struts are new. Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibr ...

Siebmaschine Vibration classifier workshopoverhauled Make: Allgaier Type: ARSM 33-7,5 Screening area: approx. 7.5 m² with 3 fractions Screening capacity: approx. 80 - 100 m³ / h with 3 fractions (for wood chips and sawdust) Drive power: 5.5 kW Suitable for the following screening materials: -Wood chips -Sawdust -Sawdust - Reclaimed wood -Bark # Screening machine oscillating screen workshop reconditioned Make: Allgaier Type: ARSM 33-7,5 Screening area: approx. 7.5 m² with 3 fractions Screening capacity: approx. 80 - 100 m³ / h with 3 fractions (for wood chips, sawdust) Drive power: 5.5 kW Suitable for the following screenings: - Wood chips - Sawdust - Sawdust - waste wood -Bark

Screening machine | Vibrating Screening Machine Type ASM-300 New machine | Demonstration machine - Make: S&F GmbH - Type: ASM-300 - Design: TOP LINE - Screening capacity: approx. 35 - 40 m³/h (for wood chips and sawdust) - Screening area: 3.0 m² - Fractions: 3 pieces - Screen decks: 2 pieces - Drive power: 2.2 kW - Machine weight: approx. 1,900 kg - Machine colour: RAL 5002 Ultramarine Blue - Screen inserts freely selectable Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibrating screen | Wood chip sieve | Vibrating Screening Machine | Flat sieve | Vibrating screen | Roller classifier | Screening machine for wood chips Screening Machine | Oscillating Screen Type ASM-300 New machine | Demonstration machine - Make: S&F GmbH - Type: A ...

Rudnick & Enners Screening Machine | Vibrating screen type RE-RS 3x6/4F refurbished with new sieve box - Make: Rudnick & Enners - Type: RE-RS 3x6/4F - Year of construction: 1998 - Condition: refurbished - Screening capacity: up to approx. 80 - 100 srm/h (for wood chips and sawdust) - Screen area: 6.5 m² per screen mesh size - Fractions: 3 or 4 - Screen decks: 3 pieces - Drive power: 5.5 kW - L x W x H: 6,000 x 2,800 x 2,350 mm - Machine weight: approx. 5,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Design of inlets and outlets according to customer requirements Screening machine overhauled with new screen box. Spherical roller bearings and universal joints are new. Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed woo ...

Chips Centrifuge 50 kg filling Delivery possible Please inquire with the place of postcode and whether there is unloading capacity. VAT not deductible.  ... more information

Dimensions: 3900 x 2100 x 2100 mm Passage chamber: 1500 x 1500 mm; 2 pieces Screen permeable grain size: 1.8 mm Receiving funnel size: 1100 x 210 mm Outlet opening screened material (fine): diameter 200 mm 2 pieces Spout opening coarse material (remainder): 320 x 240 mm Electrical data: 380 V; 2 x 1.1 kW

Vibrorinne MATEC vibrating mesh drive 4 4 kW, 3 x 400 V 50 Hz Pan nominal width 600 mm Gutter inner width 500 mm Trough depth 260 mm Extra deep OK built channel 480 mm Gutter length approx. 11'000 mm Transport speed nominal approx. 17 m / min Year 2018 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Builder: TERRA SELECT Model: T5 Motor: PERKINS 55 kW (75 HP) Transp. Data: L. 11.150 mm x L. 2.550 mm x A. 4.050 mm Operat. Data: L. 14.100 mm x L. 6.800 mm x A. 3.900 mm Year: 2005 Working Hours: 3.200 h Hourly Production: 120 m³/h Screening: TROMMEL L. 4.500 mm x D. 2.000 mm Hopper Height: 2.820 mm Hopper Capacity: 4.40 m³ Discharge Belts: L. 4.900 mm x L. 900 mm Fuel Tank: 300 L Weight: 15.400 Kg

Builder: KOMPTECH Model: PRIMUS Engine: PERKINS Power Engine: 38 kW (51 HP) Year: 2015 Working Hours: 2.650 h Hourly Production: 70 m³/h Screening System: TROMMEL L 4.000 mm X D 1.450 mm Weight: 8.000 kg  ... more information

USED TROMMEL FOR DOPPSTADT, KOMPTECH, TERRA SELECT AND SEKO IN READY DELIVERY: FOR T4 / T40: 10 mm SQUARE HOLE 6 mm THICKNESS (USED) 15 mm SQUARE HOLE 6 mm THICKNESS (USED) 15 mm SQUARE HOLE 6 mm THICKNESS (NEW) 20 mm SQUARE HOLE 8 mm THICKNESS (NEW) 25 mm SQUARE HOLE 8 mm THICKNESS (NEW) 30 mm SQUARE HOLE 8 mm THICKNESS (NEW) 35 mm SQUARE HOLE 8 mm THICKNESS (NEW) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW) 50 mm SQUARE HOLE 8 mm THICKNESS (NEW) 80 mm SQUARE HOLE 8 mm THICKNESS (NEW) FOR SM 518 DOPPSTADT: 10 mm SQUARE HOLE 6 mm THICKNESS (NEW) 15 mm SQUARE HOLE 6 mm THICKNESS (NEW) 20 mm SQUARE HOLE 6 mm THICKNESS (USED & NEW) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW) 50 mm SQUARE HOLE 8 mm THICKNESS (USED) 50 mm SQUARE HOLE 8 mm THICKNESS (NEW) 80 mm CIRCLE HOLE 8 mm THICKNESS (NEW) FOR SM 618 DOPPSTADT: 10 mm SQUARE HOLE 6 mm THICKNESS (USED) 20x25 mm RECTANGULA ...

Modell: PPK STADLER Motor: ELECTRIC Operative Data: W. 6.500 mm x L. 2.500 mm x H. 4.000 mm Hourly Production: 15 t/h N° Paddles: 2x 6 Pz Useful Length: 2.180 mm Power Consumption: 4 kW N° Fractions: 2 Weight: 8.000 Kg Treated Materials: PAPER / CARDBOARD  ... more information

Vibrorinne MATEC drive rear Overtime separation and â repatriation Vibro Drive 1 electric motor 3 kW Linder nominal width inside 500 mm Preparing for 1700 mm Linen nominal length 4000 mm Peasant sheet seal unit perforation 20 mm Weight about 560 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Sell a star screen that has worked in waste wood processing. Screen cut 100 mm, Electrically driven, extended discharge belts  ... more information