Manufacturer:
(Category: 2500)
Cartridge filters, among other things, for the filtering of paint dusts Manufacturer: Donaldson Torrit Type: DFT-18 Year of construction: 2004 Volume flow: 3.33 m³/s; 12,000 m³/h Power consumption: 11 kW Weight: 1.175 kg Fan: from 1980 (see nameplate) ... more information
Cartridge filters, among other things, for the filtering of steel dusts Manufacturer: Donaldson Torit Type: TDS 20 Year of construction: 2005 Power consumption fan: 22 kW Volume flow: 18,000 m³/h Pressing: 2,550 Pa Weight: 1,800 kg Construction: Robust filter housing made of 3 and 4 mm sheet steel Special features: Upstream cyclone made of Hardox sheet metal, downstream police filter system, various pipes and screws
Thermal imaging camera Infrared camera Brand: Infratec Type: PIR uc With suitcase ... more information
Used GENIUS B-640 Compact optical sorter. Principle of operation: The product is evenly distributed on the conveyor belt and scanned by cameras and / or lasers on both sides of the different control zones. A few milliseconds later, the defects are rejected in 1 or 2 separate jets by powerful air guns located at the end of the feed belt. A good product continues its way through processing. Electrical requirements Voltage: 400V 3-phase (+ neutral and protective conductor) Power: 4kVA Frequency: 50Hz Compressed air requirements Minimum pressure: 6-7 bar (90-100 PSI) (At the entrance of the sorter) Normal consumption: 400/1500 L / min Maximum consumption: 10,000 L / min Water requirements Water pressure: between 1 and 3 bar Temperature: between 5 ° C and 12 ° C
ID3220 2 pieces/2 pieces self propelled transport ship Self-propelled transport vessel year/Year of construction 1981 Length 68.93 m, beam 7.03 m, draught 2.01 m, freeboard 0.415 m, displacement 855.52 cbm, Transport capacity 600 tons, 5 watertight transverse bulkheads, 1 hold, 2 propulsion engines, 2 main propellers, 394 KW main propulsion power, 1 bow anchor winch with power drive, 1 stern anchor winch with main drive, main rudder drive electric-hydraulic, Schottel SRP150, flank rudder drive, bow rudder, bow thruster, bilge pump 660 l/min, Crane (payload up to 2000 kg) Length 68.93 m, beam 7.03 m, draught 2.01 m, freeboard 0.415 m, displacement 855.52 cbm, 600 t transport capacity, 5 watertight transverse bulkheads, 1 cargo space, 2 propulsion motors, 2 main propellers, 394 KW main propulsion power, 1 bow anchor winch with power drive, 1 stern anchor winch with main drive, main ...
ID3225 Cutter suction dredger Scope of application: sandy gravel, sand and silt for dredging. Thanks to its strong cutting head, it is also able to dredge soil interwoven with root system Length: 24 m, width:7 m, Depth: max.: 1,3 m, Displacement: 153.5 tons Slurry transport distance max.: 1000-1500 m For this, the appropriate pipe length is available. Pipe diameter: 300 mm or 400 mm Pump pressure height max.: 80 m Maximum dredging depth: 12 m Power: depending on the material: 150-450 cbm/hour dry material Cutter Head Suction Dredger Application: Dredging of sandy gravel, sand and silt. Thanks to its strong cutting head, it is also able to dredge soil interspersed with roots. Length: 24 m, Width: 7 m, Depth: max.: 1.3 m, Displacement: 153.5 tons Material transport distance max.: 1000-1500 m The appropriate pipe length is available for this purpose. Tube diameter: 300 mm o ...
Semi finished, just missing these price for each boat finished or we trade in the state they are. ... more information
Baking tray 60 x 40 cm, brown, suitable for some ovens e.g. MIWE, Wiesheu, etc. ... more information
Casing for cooked and boiled sausage without smoking. Remaining stock approx. 3 pallets ... more information
7 x Meva MD stacking frame with wheels is used for storing and transporting construction supports, wooden beams, etc. 155kg 7 x Meva MD Stacking rack with wheels Is used to store and transport props, wooden girders, etc. 155 kg ... more information
Doka four-way head H20 - galvanized Ceiling support head for the support and stabilization of doka formwork carriers. Weight 4kg Length 25cm Width 20 Height 33 Doka 4-way head H20 - galvanized Floor-prop head for supporting and stabilising Doka formwork beams. Weight: 4kg Lenght: 25cm Width: 20 cm Height: 33 cm
Year of construction 2015 Folding and inserting machine Computer control with touch screen 2 x A4 feeder 1 x insert feeder up to approx. 2,000 cycles / h Delivery date: immediately from stock Price on request. We deliver and install worldwide! ... more information
Brush Floor Cleaner Airflex 30 pneumatic drive very good condition LWH: 1400 x 500 x 1000 mm Weight: approx. 70 kg ... more information
Metal detector Boekels Discovery C 50x35 -Year of construction 2003 -Passage height approx. 31cm ... more information
ID3233 Pontoon year/Year of construction 1993 Pontoon, length 19.70 m, width 18.20 m, draught 0.3 m, displacement 36.2 tonnes Pontoon, length 19.70 m, beam 18.20 m, draught 0.3 m, displacement 36.2 t ... more information
We sell approx. 340 m² of used Reber formwork! There will also be partial quantities! 76 pieces 2.50m x 1.25m 4 pieces 2.50m x 1.00m 4 pieces 2.50m x 0.75m 6 pieces 2.50m x 0.625m 4 pieces 2.50m x 0.55m 18 pieces 2.50m x 0.49m 4 pieces 2.50m x 0.43m 10pcs 2.50m x 0.30m 4 pieces 2.50m x 0.24m 4 pieces 2.50m x 0.20m 4 pieces 1.25m x 1.25m 4 pieces 1.25m x 1.00m 4 pieces 1.25m x 0.43m 14 pieces of outer corners 2.50 14 pieces of inner corners 19/19/250 8 pieces of inner corners 24/24/250 2 pieces of movable inner corners 2 pieces of movable outer corners Miscellaneous accessories! Price is net 60,- € plus 19 % VAT and per m²! For more information, please call 0171/8964905!
SINGLE LOT - about 4654 pcs Lighting of various types designer brand Leucos Wall lamps, pendant lamps, table lamps, wall lamps etc PRESENT RESERVE PRICE ... more information
Weighing cabin / weighing unit for product and personal protection. GMP compliant clean room system with air circulation system. The laminar flow area is generously dimensioned. This unit is in EX version and as good as new. All rooms are controlled and monitored by Siemens technology ... more information
RADAX high-pressure duct fan High-pressure duct fan with cylindrical pipe sleeve, flanges on both sides, directly driven. Cylindrical galvanized steel tube Sheet metal, with double-sided moulded Flange, hole pattern according to DIN 24155, recessed built guide wheel. Semi-axial impeller, eight spatially connected curved blades made of thermoplastic, Balancing quality G 6.3 according to VDI 2060 and DIN ISO 1940. Three-phase squirrel-cage motor by Voltage reduction speed controllable, Thermal contacts, closed design, maintenance-free, sealed, low-noise Ball bearings with long-term lubrication. Fan data (default) Seawater version. Also resistant to weak acids and alkalis. NEW!