Description: Serial number S5791 Adjustable anchor point Shackles, chains and accessories included Total length 210 cm Load capacity: 6,000 kg Including wooden bearing block Approx. Onsite Dimension. (l x w x h): 2,400 x 1,050 x 1,100 mm, weight approx.: 800 kg ... more information

Description: Including two load center mounts adjustable in the grid Total length: 410 cm Load hook adjustment range: 200 cm to 400 cm, Load capacity: 15,000 kg Approx. Onsite Dimension. (l x w x h): 4,100 x 400 x 1,000 mm, weight approx.: 1,000 kg ... more information

Description: Serial number 20131224 Total length: 460 cm Load hook adjustment range: 150 cm to 450 cm Load capacity: 17,000 kg Approx. Onsite Dimension. (l x w x h): 4,600 x 400 x 1,000 mm, weight approx.: 900 kg ... more information

Description: Serial number 6086 Total length: 330 cm The attachment point is infinitely adjustable Shackles and sliders included Wooden storage box included Load capacity: 20,000 kg Approx. Onsite Dimension. (l x w x h): 4,600 x 400 x 1,000 mm, weight approx.: 805 kg ... more information

Description: Anschluss: 380/400 V 16A Traglast: 1000 kg Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 400 mm, weight approx.: 60 kg ... more information

Description: Maximum power: 6.5 HP Displacement: 196 cm³ Shaft diameter: 19mm Engine type: Loncin OHV single-cylinder, 4-stroke internal combustion engine Plate dimensions: 500 x 360 mm Centripetal force: 10.5 kN Maximum compaction depth: 20 cm Frequency: 5600 Feed speed: 12 m/min Noise emission: 108 dB(A) Weight: 60 kilogramsApprox. Onsite Dimension. (l x w x h): 800 x 500 x 600 mm, weight approx.: 70 kg

Description: Maximum power: 6.5 HP Displacement: 196 cm³ Shaft diameter: 19mm Engine type: Loncin OHV single-cylinder, 4-stroke internal combustion engine Plate dimensions: 500 x 360 mm Centripetal force: 10.5 kN Maximum compaction depth: 20 cm Frequency: 5600 Feed speed: 12 m/min Noise emission: 108 dB(A) Weight: 60 kilogramsApprox. Onsite Dimension. (l x w x h): 800 x 500 x 600 mm, weight approx.: 70 kg

Description: Maximum power: 6.5 HP Displacement: 196 cm³ Shaft diameter: 19mm Engine type: Loncin OHV single-cylinder, 4-stroke internal combustion engine Plate dimensions: 500 x 360 mm Centripetal force: 10.5 kN Maximum compaction depth: 20 cm Frequency: 5600 Feed speed: 12 m/min Noise emission: 108 dB(A) Weight: 60 kilogramsApprox. Onsite Dimension. (l x w x h): 800 x 500 x 600 mm, weight approx.: 70 kg

Description: Rotating Telescopic Handler serial number ZF1RT40A9C5000532 engine detailsIveco 6 cyl. turbo 145 hp max lifting capacity 4500 kg Capacity at maximum lifting height 2500 Kg max lifting height 21 mt hydraulic system max delivery120 lt/min hydraulic system pressure 230 bar fuel tank capacity 155 lt max travel speed 40 km/h traction 4x4 transmission hydrostatic number of gears 2 tires size 18-22.5 tires condition 90% IMPORTANT:  , For the loading it's needed a suitable transport vehicle , (equipped with ramp) and the equipment can be driven on it. Dimensions and weight are approximate, , Operating hours ,might by slightly different For more detailed information, please see PDF file (roto-series-en.pdf)Approx. Onsite Dimension. (l x w x h): 8,800 x 2,400 x 2,900 mm, weight approx.: 15,500 kg

Approx. Onsite Dimension. (l x w x h): 800 x 800 x 350 mm, weight approx.: 150 kg ... more information

floor-plate length: 5000 mmfloor-plate width: 1800 mmfloor-plate height: 290 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

table length: 400 mmtable width: 400 mmtable load: 120 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUsed rotary table in very good condition, little used (less than 100 hours)Table diameter 400 mmBosch AC-MotorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Can be taken away from our yard for Free., 0 � ... more information

2.0 t capacity, 80x40x1200 mm tines, with Bobcat T30.60 & T35.105 telescopic handler mount ... more information

Year of construction 2020, 80 cm width, 300 l capacity, 214 kg own weight, adapter for KSW08 ... more information

Year of construction 2022 - NEW; with Martin M10 mount, 420 kg net weight, suitable for 6 - 12 t excavators ... more information

with Genie / Terex recording ... more information

NEW, 2.15 m³ capacity, 585 kg net weight, with Euro mount, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

NEW, 2.50 m wide, with Manitou holder, 2.15 m³ capacity, 585 kg dead weight ... more information

NEW, width 220 cm, 266 kg dead weight, 0.75 m³ capacity, with JCB Q fit mount ... more information