- A. MEIER (1)
- A.M.P.E.R.E. (1)
- AARDWOLF (1)
- ABAKUS (1)
- ABAWERK (1)
- ABB (1)
- Adixen (2)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIRFLEX (1)
- AIRMEX (1)
- AIRPEL (1)
- ALCE (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALTRONIC (1)
- AMADA (3)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- AMP (4)
- ANEST IWATA (1)
- ANGELANTONI (1)
- ANGELO VECCHIO (2)
- ANYCUBIC (1)
- APV (1)
- ARI (1)
- ARP (1)
- ARZUFFI (1)
- AS EXCLUSIV (1)
- ASECOS (2)
- ASSFALG (1)
- AT (2)
- ATEC (1)
- ATLAS COPCO (1)
- ATOM (1)
- AUSA (1)
- AVK (1)
- AVOCENT (1)
- BACHER (1)
- BANK (1)
- BASE (3)
- BAUER (3)
- BAYERN TOOLS (5)
- BBC (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BERNER (1)
- BETA (1)
- BETTER PACKAGES (1)
- BIG (7)
- BILZ (6)
- BINDER (1)
- Bito (2)
- BMS (1)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BORG WARNER (1)
- BOSCH (9)
- BOSCH REXROTH (1)
- BOSCHERT (2)
- BOSTITCH (1)
- BOY (1)
- BRADY (1)
- BRAZILIAN SHIPYARDS (1)
- BROVIND (1)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BUDERUS (1)
- BUHLER (1)
- BULLERJAN (1)
- BUSCH (1)
- BUX (3)
- BÖSSINGER (1)
- CA-02 (1)
- CABER (3)
- CALAMIT (1)
- CAME (1)
- Capstone (2)
- CARRELLIFICIO PADOVA (1)
- CASE TECH (1)
- CASTIGLIA (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CERA (1)
- CFM (1)
- CLEAN FORCE (1)
- CLENA (2)
- CODEMA SYSTEMS (1)
- COLD JET (1)
- COMAC (1)
- COMET (1)
- CONCEPT LASER (1)
- CONTEC (1)
- COSMOS UTENSILI (1)
- ... more
Manufacturer:
(Category: 2500)
New in: 1953
used
25 € Description: Technical details, volt 220/380, ampere 26.5/15.3 A, revolutions per minute 1435 rpm, total power requirement 7.4 kW, additional information: replacement motor for BRAGONZI horizontal drilling and milling machineApprox. Onsite Dimension. (l x w x h): 800 x 500 x 600 mm, weight approx.: 100 kg
New in: 1954
used
200 € Description: Maximum weight: 240Kg Minimum weight: 10Kg Equipped with: transport rollers and metal base Approx. Onsite Dimension. (l x w x h): 1,050 x 660 x 2,150 mm, weight approx.: 300 kg ... more information
New in: 1968
used
ID3225 Cutter suction dredger Scope of application: sandy gravel, sand and silt for dredging. Thanks to its strong cutting head, it is also able to dredge soil interwoven with root system Length: 24 m, width:7 m, Depth: max.: 1,3 m, Displacement: 153.5 tons Slurry transport distance max.: 1000-1500 m For this, the appropriate pipe length is available. Pipe diameter: 300 mm or 400 mm Pump pressure height max.: 80 m Maximum dredging depth: 12 m Power: depending on the material: 150-450 cbm/hour dry material Cutter Head Suction Dredger Application: Dredging of sandy gravel, sand and silt. Thanks to its strong cutting head, it is also able to dredge soil interspersed with roots. Length: 24 m, Width: 7 m, Depth: max.: 1.3 m, Displacement: 153.5 tons Material transport distance max.: 1000-1500 m The appropriate pipe length is available for this purpose. Tube diameter: 300 mm o ...
New in: 1972
used
ID2997 Gmeinder & Co. D25B year/Year of construction 1972 Shunting locomotive, gauge 1435 mm, 270 hp, single-acting Knorr air brake, speed approx. 24 km/h, A full Br3 was conducted this year. Shunting locomotive, gauge 1435 mm, 270 hp, single acting air brake Knorr, speed approx. 24 km/h, A complete Br3 was carried out this year.
New in: 1975
used
Sell a used barrel heater incl VA tank and fittings. Dimensions Durcjmesser about 80cm 160cm high Heating is divisible and can be removed. The heater is mounted on swivel castors. Power 2000 Watt Container stands on 3 feet and has an emptying opening in the lower area Condition used. Used for oil
New in: 1976
used
200 € Description: Maximum weight: 350Kg Minimum weight: 25Kg Equipped with: transport rollers and metal base Approx. Onsite Dimension. (l x w x h): 1,050 x 660 x 2,150 mm, weight approx.: 300 kg ... more information
New in: 1977
used
Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", we offer you: Number: about 30 passenger coaches technical data Passenger coaches 1st year of construction: 1977 to 1981 2. Weight: 33 t 3. Seats: 72, 2nd class 4. Longitudinal racks 5. Length over buffer: 23700 mm , 6. Side length 23400 mm 7. Rotary pin spacing: 17600 mm , 8. Rotating salmon distance: 2700 mm 9. Total axis distance: 20300 mm 10. Wheelset type: YRP and YRF All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, et ...
New in: 1980
used
700 € Description: Automatic wave saw Saw blade 315mm max. shaft diameter 90mm Speeds 9 - 45 rpm Motor 3.0KW See picturesApprox. Onsite Dimension. (l x w x h): 2,900 x 1,300 x 1,500 mm, weight approx.: 1,600 kg ... more information
New in: 1981
used
40 € Description: Volume 0.5 m³ Permissible maximum load 1000 kg with forklift mountApprox. Onsite Dimension. (l x w x h): 1,500 x 900 x 900 mm, weight approx.: 140 kg ... more information
New in: 1981
used
ID3220 2 pieces/2 pieces self propelled transport ship Self-propelled transport vessel year/Year of construction 1981 Length 68.93 m, beam 7.03 m, draught 2.01 m, freeboard 0.415 m, displacement 855.52 cbm, Transport capacity 600 tons, 5 watertight transverse bulkheads, 1 hold, 2 propulsion engines, 2 main propellers, 394 KW main propulsion power, 1 bow anchor winch with power drive, 1 stern anchor winch with main drive, main rudder drive electric-hydraulic, Schottel SRP150, flank rudder drive, bow rudder, bow thruster, bilge pump 660 l/min, Crane (payload up to 2000 kg) Length 68.93 m, beam 7.03 m, draught 2.01 m, freeboard 0.415 m, displacement 855.52 cbm, 600 t transport capacity, 5 watertight transverse bulkheads, 1 cargo space, 2 propulsion motors, 2 main propellers, 394 KW main propulsion power, 1 bow anchor winch with power drive, 1 stern anchor winch with main drive, main ...
New in: 1984
used
Radiator for 6 cylinders Mercedes Unimog.613 713,813,913, 1013 etc Shipping bulky goods 43.90 Pick-up is possible. VAT not deductible. ... more information
New in: 1985
used
specifications: - Clamping area approx. 400 x 300 mm - Travel across x approx. 500mm - Travel along Y approx. 300mm - 2 Handwheels - Height 220 mm - 4 T - grooves 14 mm - Distance of the T - grooves approx. 72mm - Space required approx. W 1100 x D 900 x H 220 mm - Weight approx. 190 kg
New in: 1985
used
- Machine weight: 7 kg - Space requirement (W x D x H): 0.3 x 0.3 x 0.2 m Details Separate control unit for chuck clamping ... more information
New in: 1986
used
450 € Description: Machine number: 200065956 Air volume: 5409 m3/h Total pressure: 280 kp/m2 Power requirement: 11 kW Speed: 3000 rpm Without pipingApprox. Onsite Dimension. (l x w x h): 2,500 x 1,600 x 2,200 mm, weight approx.: 1,000 kg ... more information
New in: 1986
used
well-preserved traverse of the company Voigt, type 01, built in 1986 Maximum range: 4,000 mm Weight approx.: 850 kg Capacity: 32,000 to ... more information
New in: 1987
used
Article number: 27-06-181 Manufacturer: Goldmann Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1987 L x W x H: approx. 400x400x600mm Weight: approx. 150kg Final pressure: approx. 5 bar Power requirement: 0.55kW Other accessories on request Price and other technical data on request
New in: 1987
used
WILA Central crowning rail Mint unused Crowning device bending matrices up to 2500 mm Dimensions: Lg approximately 2750 mm, total for press brake dies 2500 x 70 mm Crowning adjustment Central with manual hand crank with counter Herstellernr. 11358. year of construction: 1987 ... more information
New in: 1987
used
80 € Description: Carrying capacity 750 kgApprox. Onsite Dimension. (l x w x h): 1,300 x 900 x 880 mm, weight approx.: 80 kg ... more information
New in: 1987
used
An original control cabinet dismantled by PAAL Konti 200B, built in 1987. It is based on analog relays. It is also suitable for the other models such as: Konti 125, 200, 275 , depending on model and drive power. A complete control cabinet, functional ... more information
New in: 1987
used
110 € Description: Drum 200 x 180 mm Drum capacity 5 L Infinitely adjustable speed 500 - 3600 rpmApprox. Onsite Dimension. (l x w x h): 500 x 500 x 450 mm, weight approx.: 50 kg ... more information