used Centreless Grinding Machines for sale

Workspace: Workpiece diameter: 0.1 mm – 10 mm Smallest feed of the control disc slide (manual): 0.001 mm Disc dimensions: Grinding wheel diameter: up to 150 mm Grinding wheel width: up to 50 mm Control disc diameter: 40 mm Control disc diameter: max. 100 mm Weight: 700 kg The mechanics of the machine have been completely overhauled and are in perfect condition.

Manufacturer | Manufacturer: ASW Model | Model: SRA 250 Grinding process | Grinding process: Groove grinding | plunge grinding Workpiece Diameter | workpiece diameter: 1.5 - 35 mm Grinding Wheel | Grinding wheel: Diameter 450 mm | Width 250 mm | Bore diameter 203.2 mm Control Disc | Regulating wheel: Diameter 250 mm | Width 250 mm | Bore diameter 127 mm Drive power | Drive power: 15 kW Total footprint | Total installation area: approx. 6,300 x 5,100 mm Machine weight | Machine Weight: approx. 10 t

GENERAL CHARACTERISTICS, Max. grinding diameter 120 mm, Grinding wheel width 250 mm, Minimum Ø to be ground 1 mm, Ø drive grinding wheel 304 mm, Ø working wheel 508 mm, DIMENSIONS AND WEIGHT, Height 1,700 mm, Width 1,500 mm, Length 2,750 mm, Weight 4,000kg, ELECTRICAL CHARACTERISTICS, Grinding head motor power 15 Kw, Power motor power grinding head 1,8kw, Hydraulic motor power 1,1kw, Total power 20 kW, Voltage 220/380 V

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 300x125x175mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Motor power grinding wheelhead: 15 Cv, Total power: 16.5 Cv, Long: 1.654 mm, Width: 1.500 mm, High: 1.535 mm, Weight: 1.900 kg

Ø grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min / max to grinding: 1.5 / 100 mm, Regulating wheel width: 200 mm, Min / max regulating wheel speed (r.p.m.): 10/250 rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Maximum infeed grinding length: 200 mm, Motor power grinding wheelhead: 15 kW, Long: 2020 mm, Width: 1300 mm, High: 1420 mm, Weight: 4200 kg

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dressing (auto / manual): Automatic / Automatic, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi - TF, Cnc axes nº: 6, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 1.800 mm, Width: 2.800 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included:

TECHNICAL INFORMATION:, Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm, Dimensions of the regulating grinding wheel (od x id x width): Ø304,8xØ152.4x204 mm, Main motor power: 20 Kw, Voltage: 380 V, Height: 1700 mm, Length: 2000 mm, Width: 1080 mm, Weight: 4230 Kg approx.

Centerless grinding machine - centerless Ghiringhelli M100 CNC 1A 400x100mm wheel CN 1 axis plunge + through feed grinding The machine can be seen working in our warehouse in Gussago BS. Mimu(dot)com machine tools Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 100, Wheel dia ...

Weight: 2000Kg approx., Dimensions (L x W x H): 2000x1800x1700 mm, Total power: 8kW

working area: 12-60 mmspeed: 60/120 m/minBar length: 4000 mmFeed: 0-5 mm/Urolling power: 500-40000 Nweight: 1200 kgtotal power requirement: 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We have about 50 different guide rails, different length/width and height for sale. The guide rails are HSS and HSS with HM. Partly new or used . Please contact us so that we can make you an offer.

Centerless cylindrical grinding machine KÖNIG & Bauer M130 MULTIMAT 130 Condition: very good, used Specifications Grinding wheel rotation speeds 35/45 (60) m/sec. Largest grinding diameter 35 mm Smallest grinding diameter 0.8 mm Maximum workpiece length for continuous grinding approx. 200 mm Maximum workpiece length for plunge grinding 130 mm The machine can be viewed by arrangement in our factory in Krefeld. – Errors, modifications and prior sale excepted –

Mikrosa SASL 3/1 workshop overhauled. Condition very good, ready for immediate use. Equipped with loading device for plunge grinding, through-loop grinding optionally possible. The machine has been mechanically and electrically repaired and functionally tested. Specifications Max. workpiece size for grinding wheel Ø 500mm 3.5 - 140 mm Max. workpiece size for grinding wheel Ø 600mm 3.5 – 80 mm Workpiece length max. (plunge grinding) 245 mm Grinding wheel Ø - External 630 mm - Inside 380 mm Grinding wheel width 250 mm Control disc Ø - External 315 mm - Inside 230 mm Control disc width 250 mm Grinding wheels speed 35/45 m/s Control disc speed (infinitely adjustable) 10-480 min¹ Drive power 32 kW Machine weight approx. 4.8 t Control cabinet weight approx. 400 kg The machine can be viewed by arrangement in our factory in Krefeld.

CN Centerless grinding machine, ROSSI MONZA 1500 CN, currently being overhauled and fully electrically/electronically retrofitted, Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing, Grinding wheel 350 mm 610 mm dia, This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is g ...

Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 500 auto plunge also available The machine is in our warehouse in Gussago BS, under power Mimu machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding gap.

CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS., Mimu machine tools Italy, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 250, Wheel diameter: 510, C ...

Palmary centerless grinder

Centerless grinding machine BB 6