작업: 공작물 직경: 0.1 mm – 10 mm 제어 디스크 슬라이드의 최소 피드(수동): 0.001 mm 디스크 크기: 연삭 휠 직경: 최대 150mm 연삭 휠 폭: 최대 50mm 제어 디스크 직경: 40 mm 제어 디스크 직경: 최대 100mm 무게: 700 kg 기계의 기계공은 완전히 점검되었으며 완벽한 상태입니다.
제조사 | 제조사: ASW 모형 | 모델: SRA 250 연삭 공정 | 연삭 공정: 홈 연삭 | 플런지 그라인딩 공작물 직경 | 제품 직경: 1.5 - 35 mm 그라인딩 휠 | 숫돌: 직경 450 mm | 너비 250 mm | 보어 직경 203.2 mm 컨트롤 디스크 | 조절 휠: 직경 250 mm | 너비 250 mm | 보어 직경 127 mm 구동 동력 | 구동 동력: 15kW 총 설치 공간 | 총 설치 면적: 약 6,300 x 5,100 mm 기계 중량 | 기계 무게: 대강 10 t
GENERAL CHARACTERISTICS, Max. grinding diameter 120 mm, Grinding wheel width 250 mm, Minimum Ø to be ground 1 mm, Ø drive grinding wheel 304 mm, Ø working wheel 508 mm, DIMENSIONS AND WEIGHT, Height 1,700 mm, Width 1,500 mm, Length 2,750 mm, Weight 4,000kg, ELECTRICAL CHARACTERISTICS, Grinding head motor power 15 Kw, Power motor power grinding head 1,8kw, Hydraulic motor power 1,1kw, Total power 20 kW, Voltage 220/380 V
Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 300x125x175mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º
Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Motor power grinding wheelhead: 15 Cv, Total power: 16.5 Cv, Long: 1.654 mm, Width: 1.500 mm, High: 1.535 mm, Weight: 1.900 kg
Ø grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min / max to grinding: 1.5 / 100 mm, Regulating wheel width: 200 mm, Min / max regulating wheel speed (r.p.m.): 10/250 rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Maximum infeed grinding length: 200 mm, Motor power grinding wheelhead: 15 kW, Long: 2020 mm, Width: 1300 mm, High: 1420 mm, Weight: 4200 kg
Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dressing (auto / manual): Automatic / Automatic, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi - TF, Cnc axes nº: 6, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 1.800 mm, Width: 2.800 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included:
TECHNICAL INFORMATION:, Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm, Dimensions of the regulating grinding wheel (od x id x width): Ø304,8xØ152.4x204 mm, Main motor power: 20 Kw, Voltage: 380 V, Height: 1700 mm, Length: 2000 mm, Width: 1080 mm, Weight: 4230 Kg approx.
Centerless grinding machine - centerless Ghiringhelli M100 CNC 1A 400x100mm wheel CN 1 axis plunge + through feed grinding The machine can be seen working in our warehouse in Gussago BS. Mimu(dot)com machine tools Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 100, Wheel dia ...
Weight: 2000Kg approx., Dimensions (L x W x H): 2000x1800x1700 mm, Total power: 8kW
작동 범위 : 12-60 mm 속도 : 60 / 120 m / min 바 길이 : 4000 mm 피드 : 0-5 mm / U압연 힘 : 500-40000 N무게 : 1200 kg총 전력 요구 사항 : 3 kW직경 105 mm까지 추가 장치가있는 센터리스 우회전 기계소개소개 8500 m² 저장 영역, 크레인 용량 70 t이상 창고에500 대 이상의 기계 1000 개 이상 품목 작업장액세서리 기계를 원합니다 생산 라인 또는 작업을 원합니다. 판매, 다음 우리와 이야기. 이 광고의 데이터는 LogoTech oHG의 기계 관리 인 ModulMWS로 작성되었습니다.
우리는 판매를 위한 대략 50의 다른 가이드 레일, 다른 길이/폭 및 고도가 있습니다. 가이드 레일은 HM이 있는 HSS 및 HSS입니다. 부분적으로 새 제품 또는 중고 . 우리가 당신에게 제안을 할 수 있도록 저희에게 연락하십시오.
센터리스 원통형 연삭기 쾨니히 & 바우어 M130 멀티매트 130 상태: 아주 좋음, 사용 사양 연삭 휠 회전 속도 35/45 (60) m/sec. 최대 연삭 직경 35 mm 최소 연삭 직경 0.8 mm 연속 연삭을 위한 최대 공작물 길이 약 200 mm 플런지 연삭을 위한 최대 공작물 길이 130 mm 기계는 Krefeld에 있는 우리 공장에서 배열에 의해 볼 수 있습니다. – 오류, 수정 및 사전 판매 제외 –
CNC 센터리스 연삭기 미크로사 크로노스 M 6 축 연삭 휠 250x610 mm 공작물 로더로 완성 지멘스 840D CNC 기계는 Gussago BS 이탈리아에 있는 우리 창고에 있습니다. 미무 공작 기계
Mikrosa SASL 3/1 워크샵 점검. 상태가 매우 양호하여 즉시 사용할 수 있습니다. 플런지 연삭을 위한 로딩 장치가 장착되어 있으며 선택적으로 스루 루프 연삭이 가능합니다. 기계는 기계적, 전기적으로 수리되고 기능적으로 테스트되었습니다. 사양 연삭 휠의 최대 공작물 크기 500mm 3.5 - 140 mm 연삭 휠의 최대 공작물 크기 600mm 3.5 – 80mm 공작물 최대 길이 (플런지 연삭) 245 mm 그라인딩 휠 - 외부 630mm - 내부 380mm 연삭 숫돌 폭 250 mm 컨트롤 디스크 - 외부 315mm - 내부 230mm 제어 디스크 폭 250 mm 연삭 휠 속도 35/45 m/s 제어 디스크 속도(무한 조정 가능) 10-480분¹ 구동 전력 32 kW 기계 중량 약 4.8t 제어 캐비닛 무게 약 400kg 기계는 Krefeld에 있는 우리 공장에서 배열에 의해 볼 ...
CN Centerless grinding machine, ROSSI MONZA 1500 CN, currently being overhauled and fully electrically/electronically retrofitted, Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing, Grinding wheel 350 mm 610 mm dia, This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is g ...
Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 500 auto plunge also available The machine is in our warehouse in Gussago BS, under power Mimu machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding gap.
CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS., Mimu machine tools Italy, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 250, Wheel diameter: 510, C ...