similar results found in category other metal working machines
The driverless vehicle was used for transporting two bigbags, max. product weight: 2x 1.1t, max. product dimensions: 1200x1200x1950mm, max. driving speed: 40m/min, controls: SIEMENS SPS, weight: 3.6t, operational hours counter: 20h.
Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...
2,000 litres process tank, cool/heatable, insulated, propeller agitator sideways probably ABAB
Oven 450 inner dimensions 2x2x6m PLC Uterna / Europe custom made oven Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwagenöfen Kammeröfen Haubenöfen Drehherdöfen Thermische Nachverbrennungsanlagen forno a camera per trattamento termico alluminio forno a carro per trattamento termico alluminioforno a carro per trattamento termico alluminio forno a carro per trattamento termico alluminio forno continuo per trattamento termico alluminioforno continuo per trattamento termico alluminio forno continuo per trattamento termico alluminio linea batch per trattamento termico alluminiolinea batch per trattamento termico aliuminio forni industriali ...
Propeller mixer Manafacturer: ABB Propeller blade diameter: 250 mm in EEx Protection LWH: 300 x 300 x 800 mm
oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Ba ...
Wire cutting edm machine Manufacturer Accutex Model AU-3iA Year 2008
Accutex AU-500iA EDM Wire Cutting Machine Machine is in excellent condition Operating hours: 3000 ( May 2023) - Max. Work Piece 1000x600x295 mm - X, Y axis 560x360 mm - U, V axis 100x100 mm - Z axis 300 mm - Heidenhain digital bars - Transformator 110 V - 220 V - Weight 500 kg - AVS - Avto voltage stabilizator
ACCUTEX GA 43AL wire EDM machine was built in 2018 in Taiwan. This highly efficient and reliable machine can achieve complex and difficult shapes, making it ideal for the production of precision tools, dies and punches. The traditional drive has been replaced by a direct, closed-loop linear drive system to eliminate backlash and increase cutting capacity by up to 10%, with much lower energy consumption and constant operating temperature. The GA 43AL EDM machine features a state-of-the-art AccuteX CNC control based on a Windows system with touchscreen and compatibility with CAD/CAM software. The controller optimises the machining parameters according to different wire diameters, corner angles, arc radius and workpiece thickness for the best cutting efficiency and accuracy. The wire EDM machine weighs 2800 kg. Technical data of the ACCUTEX GA 43AL wire EDM machine - CNC control: Acc ...
Copper Pot Still Adrian Edelbrande 1400 liters for Whiskey and Brandy This Adrian Pot Still is made of special high-quality copper which is highly polished. The helmet of pot is pear shaped and steam heated heating coil is inside of the pot. A pot still is used to distil flavoured liquors such as whisky or cognac, but not rectified spirit because they are bad at separating congeners. This pot still has internal seam coil heater and therefore is can be used only for distillation of mash without fruits and botanicals. Spirits distilled in pots top out between 60 and 80 percent alcohol by volume after multiple distillations. Condensing is made in in vertical tubular heat exchanger with operation is autonomically controlled with a thermostatic valve. Technical characteristics Made by Adrian Edelbrande Condition Totally ...
AFT buttering machine Stainless frame, twin lane, lane width 125mm, overall length 1600mm, 3Ph, mobile
AFT Single shot depositor Mini depositor Serial: 101001-01 2010, Stainless height adjustable frame, 25Kg hopper, fill range 10g - 100g, mobile, 1Ph
AFT Sandwich cutter Serial: 135012 Stainless frame, automatically cuts sandwiches into halfs, ensures clean and centered cut on all types of sandwiches, belt width 150mm, overall length 2200, mobile, 3Ph
AFT Sandwich cutter Stainless frame, belt dimensions 2200mm x 150mm, manual wheel to set product height, 3Ph, mobile
Plotter - cutter-creaser, digital cutter Make AG Model Kasemake KM600 Year 2000 ? Bed size 158 x 222 cm vacuum bed Capcity up to 15 mm thickness Functions can cut and crease many types of materials including board and plastics, ideal machine for small runs of box making, figures, etc, in any direction Details inclduing the computer + software and license
AGIE AGIECUT 100 D Wire EDM machine YOM-not written, about 1990 Serial No. 144 Control AGIEMATIC CD AGIEPULS MM Electric Control cabinet DA-15/AF AGIE RC 123 Table dimensions: 560x445 mm Working travel: X: 300 mm Y: 200 mm Z: 256 mm Wire diameter: 0.1 - 0.3 mm Axis U, V: ±30° Working detail dimensions: length:810 mm width:580 mm height:250 mm Working detail weight: 200 kg Machine weight: 2 910 kg Dimensions 1700x1550x2130 mm In production at the moment.
AGIE AGIECUT 150 Wire EDM machine YOM-not written, about 1995 Control AGIEMATIC CF 50 AGIEPULS MMD Electric Control cabinet DA-15/PF AGIE RC 123 Table dimensions: 560x445 mm Maximum travel length X-axis: 300 mm Maximum travel length Y-axis: 200 mm Maximum travel length Z-axis: 251 mm Travel length U-axis ( -): 30 mm Travel length V-axis ( -): 30 mm Maximum workpieces length: 810 mm Maximum workpieces height: 250 mm Maximum workpieces width: 580 mm Largest workpiece weight: 450 kg Minimum starting hole: 2,0 diameter Max. Threadable workpiece height: 220 mm Wire diameter: 0,1 - 0,33 mm Max. Wire spool weight: 16 kg Dimensions 2325x1620x2130 mm Machine weight: 2900 kg In production at the moment.
AGIE AGIECUT 150 HSS CE Wire EDM machine YOM 1997 Control AGIEMATIC CF 50 SE AGIEPULS HSS Electric Control cabinet DA-19 Table dimensions: 560x445 mm Maximum travel length X-axis: 300 mm Maximum travel length Y-axis: 200 mm Maximum travel length Z-axis: 251 mm Travel length U-axis ( -): 30 mm Travel length V-axis ( -): 30 mm Maximum workpieces length: 810 mm Maximum workpieces height: 250 mm Maximum workpieces width: 580 mm Largest workpiece weight: 450 kg Minimum starting hole: 2,0 diameter Max. Threadable workpiece height: 220 mm Wire diameter: 0,1 - 0,33 mm Max. Wire spool weight: 16 kg Dimensions 2325x1620x2130 mm Machine weight: 2900 kg In production at the moment.
X axis (longitudinal) 400 mm Y axis (transverse) 250 mm Z axis (vertical) 256 mm Max length of the piece 860 mm Max workpiece width 580 mm Maximum workpiece weight 850 kg Type of the CN Agiematic Length of the tank 810 mm Width of the tank 580 mm Height of the tank 250 mm Max height of the piece 250 mm Automatic threading Yes Weight approx. in kg. 2350
Technical details x-way 350 mm y-way 250 mm z-way 256 mm Max. Workpiece dimensions 750 x 550 x 250 mm U-axis +/- 70 mm V-axis +/- 70 mm Rapid traverse X / Y / Z axis 1.5 / 1.5 / 0.6 m / min Rapid traverse U / V-axis 0.6 m / min Max. Taper 30 ° / 100 mm control AGIEVISION Wire diameter 0.1 - 0.33 mm Wire speed 60-300 mm / sec Wire feeder semi-automatic Total power requirement 9.1 kVA Machine weight approx. 3.6 t Dimensions L x W x H 2.21 x 2.21 x 2.22 m
AGIE AGIECUT EXCELLENCE 2 wire EDM machine built in 1999 in Switzerland, is used in the production of e.g. precision dies, tools and punches. For the machining of workpieces, the machine uses advanced electrical erosion technology which makes it possible to achieve difficult shapes in even the hardest materials. The use of this method further minimises or completely eliminates the need for other secondary processes, such as polishing. The AGIE EDM machine is equipped with a state-of-the-art AGIEVISION CNC controller and brushless axis servo motors to guarantee the highest machining accuracy and precision in the shortest possible time, with low energy consumption at the same time. The machine also comes with among others an integrated generator, a semi-automatic wire threading system and the AGIESETUP 3D measuring probe for automatic detection of the plane and position of the workpiece ...
AGIE AGIECUT EXCELLENCE 2F Wire cutting edm machine ACCESSORIES INCLUDED • Wire Press 214MM GTAI214300 • Rectified side grip press • GTV40 Precision Ground Press – Vertex • Grip bar for part support • Magnetic 20MM Kit 6 Units • Chiller for water temperature control – ICS Cool Energy GENERAL CONDITION • New equipment in 1999 • Completely refurbished and overhauled in 2019 • After revision it had only 152 hours of use • The Machine is in perfect working order, complying with the demanding factory specifications (Annex 1) • Can be proven in operation
Agie Agietron Integral 3 EDM Wire Cutting Machine X/Y/Z : 500/350/500 Work tank dimensions (mm) X/Y/Z- 860/620//350 Work table dimensions (mm) 800 x 600 Max work piece weight 800 kg Max. electrode weight 200 kg 28 Head Tool Change Generator power 90 A
Wire diameter: 1 mmNumber of bending slides: 1 CNC Brand: _Unknown / Other Integrated C-Axis 0-40 Rpm Min. distance table to quill : 215 Max. distance table to quill: 615 With seperate coolant tank X-Axis: 700mm Y-Axis: 500mm Z-Axis: 400mm Table size L x W / or ø:870 x 550mm Table load: 50 Feed rate X-Axis: 1500mm/min. Feed rate Y-Axis: 1500mm/min. Feed rate Z-Axis: 1500mm/min. Length: 3000mm Width: 3000mm Height:   ...
max. workpiece dimensions length x width x height 750 x 550 x 250 mm X / Y / Z axes 350 / 250 / 256 mm
Wire EDM AGIE CHARMILLES CUT 30P Used machine in excellent condition Year 2010 dimension table 950 x 630 mm working tank 1260 x 945 x 675 mm max size piece 1050 x 850 x 350 mm max size weight 1000 Kg. Axis X 600 mm Y 400 mm Z 350 mm U 100 mm V 100 mm Operating System Windows XP Overall dimension 3100 x 2800 x 2325 mm
AGIE CHARMILLES wire cut AC2 VERTEX year `2010
Longitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmAmpere: 0 ACNC Brand: 0CNC Model: 0 Operating hours: 12000Technical dataWorking table:Length: 680 mmWidth: 450 mmMax. dimensions of work piece:Length: 1000 mmWidth: 550 mmHeight: 220 mmTable load max.: 750 kgLongitudinal traverse (X-axis): 350 mmCross traverse (Y-axis): 220 mmVertical travel (Z axis): 220 mmTaper-cut +/-: 30 °Diameter of electrode wire:from: 0.33 mmup to: 0.10 mmMax. cutting speed with wire 0.33 mm: 400 mm2/minTotal power required: 10 kVADielectric aggregate:Contents: 760 lAir connect: 6 - 7 barVoltage 50 Hz 3x: 400 VoltTotal power required: 12 kVAWeight total installation approx.: 2100 kgOverall dimensions machine:Length: 2050 mmWidth: 2020 mmHeight: 2000 mmVarious accessories:Cooling unit for fluttines
Machine is in very good condition X : 600 mm Y : 400 mm Z : 350 mm
Agie Charmilles CUT30P EDM Wire Cutting Machine Axis movement: X, Y, Z : 600 x 400 x 350 mm Maximum workpiece size : X, Y, Z 1050 x 800 x 350 mm
X-Axis travel 350 mm Y-Axis travel 250 mm Z-Axis travel 300 mm X-Y-Z axes speed 6 - 6 - 15 m/min Table length 500 mm Table width 400 mm Work tank size 790 x 530 x 350 mm Workpiece weight 500 kg Linear tool changer 4 (Std. tooling) / 5 (Combi tooling) Rotary tool changer 16-80 pos. (Std. tooling) / 32-160 pos. (Combi tooling) Dimensions L 1900 x W 1690 x H 2398 mm Weight 2800 kg
Agie Charmilles Form E 600 EDM Wire Cutting Machine C axis X, Y, Z axis: 600 x 400 x 400 mm Working table.: 800 x 600 mm Maximum workpiece weight:: 1000 Kg Machine is in like new condition
Agiecut Challenge 2 Wire EDM year 2001 - CE marked used machine in excellent working condition
Stock Number: 3811 CNC WIRE EROSION MACHINE Manufacturer: AGIECUT, Type: CLASSIC 2S Machine NO.: 249-C32.101, Year of manufacture: 2001 Specifications: Size workpiece dimensions 350 x 250 x 256 mm Max. tool weight 250 kg Longitudinal movement (X) 350 mm Transverse movement (Y) 250 mm Vertical movement (Z) 256 mm U Travel U/B Axis +/- 70 mm mm Length: 2040 mm, Height: 2200 mm, Width: 1640 mm, Weight: 2680 kg
Stock Number: 3810 CNC WIRE EROSION MACHINE Manufacturer: AGIECUT, Type: CLASSIC 2S Machine NO.: 386-C32.102, Year of manufacture: 2003 Specifications: Size workpiece dimensions 350 x 250 x 256 mm Size workpiece weight 250 kg Longitudinal movement (X) 350 mm Transverse movement (Y) 250 mm Vertical movement (Z) 256 mm U Travel U/B Axis +/- 70 mm mm Length: 2040 mm, Height: 2220 mm, Width: 1640 mm, Weight: 2580 kg
AGIECUT CLASSIC 2S wire cutter 2004 AGIECUT CLASSIC 2S
USED AGUILAR Y SALAS STAINLESS STEEL 11.500 LITRES TANK WITH AGITATION AND INNER COIL REF.: C9216 Vertical tank made of 304 stainless steel by AGUILAR Y SALAS with a capacity of 11,500 liters. With double height propeller agitation and internal coil at the bottom. On barckets. General characteristics: Manufactured by AGUILAR Y SALAS Material Stainless steel 304 Year built 1986 BODY COIL Design pressure atm 10 bar Design temperature 90 ºC 190 ºC Test pressure estanco 18.7 bar Volume 11.500 l 12 l Weight 1500 kg 30 kg Technical characteristics: Capacity 11.500 l Serpentine 12 l On Brackets Vessel outside diameter 2000 mm Vessel thickness 4 mm Vessel height 3500 mm Vessel height + funds 4320 mm Thickness top bottom 4 mm Bottom bottom thickness 5 mm Motor characteristics: Rotational speed 1390 rpm Reducer characteristics: Ratio 1-29 Rotati ...
Airpower Europe APD 060 090 F05/F07-V14-H MD 7Nm/bar Pneumatic swivel actuator double-acting Valve monitor - Feedback box Model LSB 02-M2 IP 67 230 V Outer D 185 mm Inside D 155 mm Thickness 4 cm Outer steel
The machine is especially suitable for cutting beets, carrots, potatoes, peppers and other fruits and vegetables. This cutter enables the cutting of fruits and vegetables into dice and strips and the form of the cut pieces can be chosen by using different cutting tools. The desired dimensions of the dices and strips can be chosen by applying the required cutting tool. The device comes with a set of tools that ensures the cutting of fruits and vegetables to standard sizes. If the customer requires larger or smaller cut pieces then the standard ones, additional tool sets are supplied as an accessory. The cutting material is delivered manually to the infeed hopper, and cut pieces are discharged through an output funnel into a receiving bin. This output funnel is placed 380 mm above the floor level. The cutter is set on cluster wheels and therefor easy to move around the ...
Machine body is made of SUS304 sandblasted stainless steel. Theres PLC control panel, which sets dehydrating time and rotation speed, makes running smoothly. Dimension: 950x700x1230mm Basket Size:420x360x360mm Feeding per batch: about 15KG Motor Power: 1.5kw Frequency Converter Power: 1.5kw Voltage:380V, three phase
KPM-400 model peeler: Working quickly and accurately with minimum waste, these three basic features are incorporated in our knife potato peeler KPM-400, the peeler that allows you to finely peel your potatoes in only two minutes. The special design of the peeling blades and baffles ensures a uniform distribution of the peeling action over the entire surface of the product, resulting in less waste. Skins are instantly disposed of by a water jet and collected in a filter to prevent floor drain from jamming. At the end of work, the peeling disc and filter are easily removed and cleaned for improved hygiene: an important aspect which, combined with fast operation and reliability makes KPM-400 and indispensable peeling unit for modern food processing. General Features: • It is easy to discharge potato peel because it is discharged through designated chute • Peeled potatoes ca ...
KPM-400 model peeler: Working quickly and accurately with minimum waste, these three basic features are incorporated in our knife potato peeler KPM-400, the peeler that allows you to finely peel your potatoes in only two minutes. The special design of the peeling blades and baffles ensures a uniform distribution of the peeling action over the entire surface of the product, resulting in less waste. Skins are instantly disposed of by a water jet and collected in a filter to prevent floor drain from jamming. At the end of work, the peeling disc and filter are easily removed and cleaned for improved hygiene: an important aspect which, combined with fast operation and reliability makes KPM-400 and indispensable peeling unit for modern food processing. General Features: Bwhz3x0q • It is easy to discharge potato peel because it is discharged through a designated chute • Peeled ...
Cabbage Cutting Machine S65 5000 kg/h industrial belt slicing, shredding High productivity cabbage cutting machine S65: Cabbage cutting machine can be equipped with the transporter, cabbage destalkers, salting vat. High productivity 5000-7500 kg/h, high-quality materials as food-grade stainless steel AISI 304. Can be cut whole, large cabbage heads. General Features: Productivity 5000-7500 kg/h; High quality, long-lasting stainless steel cutting knives (up to 600 tons between sharpening); Disc diameter of 65 cm, grants, that you can put whole large cabbage heads; Universal cutting machine, very good for slicing, short cabbage cutting; Easy to clean, can be washed with low-pressure water; All food contact elements made of stainless steel; Powder painted frame, three-layer lacquer in the standard version, or full stainless steel version(picture); Electric connection 400/220/1 ...
Transversal Sheet metal Stiffening machine ALMORE type DS RT 1500 Year of construction:1988 Capacity: 1550 x 1,5 mm Thickness: from 0,4 to 1,5 mm Speed: from 7 to 15 m/min. Foot control Length: unlimited Useful machine for making ventilation ducts Voltage: 380 V Dimensions (L x W x H): 2000 x 800 x 1500 mm Weight: approx 1500 kg
AMADA EUROPE 245 turret press Technical data : - CNC control: FANUC 18 i-P - pressure: 20 Tons - max. 31 station non-recapture punching format: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - max. size of the cut sheet with interception: 1020 x 2540 mm - max. size of the cut sheet with interception + 1 turn (optional): 1500 x 2540 mm - max. sheet thickness on the ball table: 6 mm - max. sheet thickness on the brush table: 3 mm - max. permissible weight on the table: 100 kg - punching accuracy: +-0.1 mm - positioning accuracy: +-0.07 mm - number of clamps/pneumatic holders: 2 - number of axes controlled simultaneously: 3: X, Y, C - revolver speed: 25 rpm. - number of strokes per minute, distance 25.4 mm, cylinder stroke 6.5 mm: 220 strokes / min. - stroke punching, distance 1 mm, cylinder stroke 6.5 mm: 480 strokes / min. - minimum programmable increment: 0.001 mm - nu ...
This AMADA Europe 245 Punching machine was manufactured in the year 2001 in France. It is equipped with a FANUC Series 18 i-P control unit. The machine has a punching force of 200 kN.
The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...
Sheet size : 1250x2500 Fanuc control unit Machine is in good condition
Amada Europe 255 CNC Punch Press Machine is in good working condition Number of station: 27 3 index(2 piece b, 1 piece c) Fanuc control unit Sheet metal size: 2500x1290
1250 x 1250 with reposition 27 station with 3 index - Very good condition