Veneer press - School press - Experimental press BÜRKLE U40 built 1979 Ges. Power: 6.25 kW Nominal operating current: 14.5 A Power per heating plate: 2,750 W Plate size: 120 x 80 cm Electric Aluminum Heating Plates max. temperature: 120° C Opening width: 40 cm 4 hydraulic cylinders each with a diameter of 70 mm Nominal surface pressure: 4 kp/cm² max. surface pressure at 75% surface design: 5.5 kp/cm² Operating pressure: 260 bar Circumferential safety ripcord (emergency stop) Automatic opening (automatic opening after the preset time has elapsed) Press frame in dismountable design Weight: 1,350 kg Machine dimensions (approx. dimensions): L 165 cm W 96 cm H 173 cm School machine - The machine comes from a school training center.
Gebr. Veneer press GEWEMA / Hiller P65S YOC 1980 Top size: 250 x 110 cm Opening width: 35 cm Opening width limitation variably adjustable. Connected load: 15.1 kW (8.1 kW with economy switch) Power per hot plate: 7 kW circumferential safety ripcord Dimensions (approx. Dimensions): L: 288 cm W: 127 cm H: 167 cm Weight: 2.9t The hydraulics are leaking. The current consumption of the heating plates has been tested and is uniform. Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.
Description: SPECIFICATIONS Hydraulic 4-roll plate roller Character: Haeusler Type: VRM 3000/15 Roller length: 3,000 mm Plate thickness: 15 mm Number of rollers: 4 Upper roller diameter: ø350 mm Hydraulic folding Hydraulic lifting Conical rollers 2 Powered rollers Transport dimensions: 7,000 x 2,250 x 2,300 mm Machine weight: 21,000 kgApprox. Onsite Dimension. (l x w x h): 7,000 x 2,250 x 2,300 mm, weight approx.: 21,000 kg
Code: 0014 Brand: ITALPRESSE Model: V/2 Electric press for cold gluing Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2500 x 1200 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2850 x 1200 x 1650 h Weight kg 880
Plate dimensions: 2.500 x 1.250 mmDaylight opening: 400 mmNumber of daylights: 4 St.Heating: elektrisch Specific pressure: 2,9 kg/cm²Total pressure: 90 toMotor output: 2,2 kWweight of the machine ca.: ca. 2.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Veneer press Leopida Format: 2300 x 1000 mm Plates with hot water heating L x W x H: 2300 x 1100 x 2000 mm Weight approx. 2000 kg Built in 1978 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
PLC – controlled (touch screen) multifunctional press with multiple functions Firstly, our multi-function press is a vacuum press, three-dimensional film deformation with or without membrane. Vacuum chamber size 2,340 x 1,340 mm Maximum workpiece height 60 mm Equipped with a vacuum diaphragm at the top and bottom. The press is equipped with a powerful vacuum system and a vacuum tank, which guarantees a constant and uniform supply of vacuum to the working chamber. Drive power vacuum pump 4.5 kW Vacuum tank volume 500 liters Vacuum pump flow rate 100 m³/hour Two pieces of air heat exchanger, each with a heating capacity of 3 kW. Secondly, our multi-function press is a hydraulic plate press with ten pieces of press cylinder and 200 tons pressing force – Suitable for different applications - - Cold and hot pressing - Single-sided and double-sided veneer pressing ...
Plate dimensions: 2200x1100 mmDaylight opening: 400 mmNumber of daylights: 1 St.Motor output: 12 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Continuous press Manufacturer: Wemhöner Model: VSF Year of construction: 1972 Panel dimensions: 3600 x 2200mm Heating medium: Oil Feeding Destacking Total length approx.: 12.000mm