used GILDEMEISTER for sale

CNC lathe GILDEMEISTER CTX ALPHA 300 with bar feeder and parts pick-up device Built in 2010 in good condition. Duty Cycle: 22930 Hours: 7326 Control Heidenhain CNC-Pilot 640 Circulation over bed: 380 mm Circulation via face slide: 290 mm Spindle bore: 73 mm Flat travel ( X ) : 190 mm Longitudinal travel ( Z ) : 335 mm Speed max. 6000 rpm C-axis 360° Number of driven tool stations 12 pos. Tool holder VDI 30 Accessories: 3 jaw chuck hydraulic 170 mm Conveyor Coolant system Hydraulic hollow clamping device Tool drive C-axis Parts pick-up device Bar Feeder Irco RBK10012 Tailstock

CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg

GILDEMEISTER MF TWIN 65 Y CNC-Drehmaschine die 1999 in Deutschland gebaut wurde, ermöglicht vollautomatische Produktionsprozesse bei hoher Genauigkeit und niedrigen Betriebskosten. Die Maschine, die sich durch ihre umfangreichen Bearbeitungsmöglichkeiten auszeichnet, ist dank ihrer robusten Bauweise, der umfangreichen Ausstattung und dem Fokus auf hohe Produktivität ideal für jeden Produktionsbetrieb, selbst bei anspruchsvollsten Herausforderungen. Das CNC-Drehzentrum MF TWIN 65Y führt Präzisionsbearbeitungen von Metallwerkstücken mit einem maximalen Durchmesser von 200 mm durch, wobei zuverlässige Werkzeuge in zwei Werkzeugköpfen mit 12 Positionen (oben und unten) eingesetzt werden. Das Drehen der Werkstücke findet in einem großen Arbeitsraum statt, der mit einem um 45° geneigten, starren Bett und einem integrierten Späneförderer ausgestattet ist, der den Arbeitsraum sa ...

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Control Siemens ... Sinumerik 840 D Turning diameter ... 365mm Rotation length ... 450mm Inclined bed Spindle bore ... 52mm Tool turret ... 12/6 Spindle speed ... 0-6000/min. Main engine power ... 12/16kW Axis C ... 360° Max. rod diameter ... 60mm L x W x H ... 4000 x 1640 x 1730mm Machine weight ... 3500kg The machine is in good condition, possible to test under electricity.

Refurbished 1992 Tapping Multi-edge hammering 1x threaded rods 2x threaded spindles Bar feeder Giovanni Cucchi DBMF 26 (YOC 2001) Lots of accessories

Manufacturer: Gildemeister Model CTX 420 V 3 Year of construction 2004 Condition Used Control Heidenhain iT Specifications Circulation diameter 565 mm Turning length 625 mm X-travel 260 mm Speed range - main spindle 25 - 5000 rpm Drive power - main spindle 25 kW Max. torque 270 Nm Spindle nose 170h5 Rod diameter 65 mm C-axis 0.001° Revolver Stations 12 pos. Tool holder VDI 40 Driven tool stations 12 pos. Speed driven tools 4500 rpm Drive power driven tools 12 kW Max. torque 27 Nm Tailstock mount MK 4 Rapid traverse X / Z 60 / 45 m/min Total power requirement 55 kVA Machine weight approx. 6.0 t Space requirement approx. (without bar feeder) 3495 x 2484 x 1885 mm Accessories/Equipment Bar feeder 3200 mm Iemca Master 880 MP-E Conveyor Parts catcher Conveyor belt C-axis Driven tools Collet Chuck Hainbuch 3 Röhm jaw chuck Too ...

1 pc used CNC lathe Make: Gildemeister Model : CT 40 Control: EPL 2 Built in 1987 Switch-on hours: 2250 hours Specifications Circulation over bed 400 mm Turning length 640 mm Turning diameter 225 mm Spindle size, flat flange 140h5 Spindle bore 72 mm Drive power 11 kW Speed range, infinitely variable 20-4000 min Z-rapid traverse/feed speed 10/5 m/min. X-rapid traverse/feed speed 10/5 m/min. Recording VDI 30 Number of tool positions 12 Length x Width x Height 3260x1720x1650 mm Machine weight 3400 kg Accessories: Hand chuck Documentation

Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 5 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation

Control Siemens ... Sinumerik 840 D Turning diameter ... 400mm Rotation length ... 600mm Inclined bed Axis Y ... 64mmmm Counter spindle Spindle bore ... 51mm Driven Tools Bar feeder Machine weight... 3700kg Number of spindle deer ... 0-6000/min. Axis X ... 160mm The machine is in good condition, possible to test under electricity.

CNC lathe GILDEMEISTER CTX 420 linear V 3 With control Heidenhain ELTROPILOT 4290 Year of construction: 2003 Max. rotatable diameter: 324 mm Max. rotatable length: 600 mm Max. circulation diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4500 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations 50 tool holders VDI 40 5 driven tools VDI 40 1 pc Hydraulic Lynette Tailstock with quill Conveyor Hydraulic jaw chuck Forkardt 0 250 mm Foot switch for jaw chuck + tailstock adjustment Coolant device 210 l ( 20 l/min ) 6 bar Operating instructions

Turning diameter 80 mm Bar diameter 20 mm Spindle speed 10000 rpm X1, Y1, Z1, X2,Z2 axes Controller Fanuc FANUC 160iB LNS barfeeder

Turning diameter 380 mm Turning lenght 330 mm Spindle bore 56 mm Spindle speed 6000 rpm Controller Fanuc 32i

Floor No.: 3711 CNC LATHE Manuf.: GILDEMEISTER , Type: GDM 90 - MC Serial No.: 4.8164, Build: 1992 Specifications: Turning diameter 240 mm dia. Turning Length 500 mm Distance between Centres 1250 mm Main motor power 50 kw Main Spindle speed range 4000 rpm C Axis - Mainspindle Stroke 0.001 degree X Axis Stroke 215 mm Z Axis Stroke 850 mm Turret 1 with 12 Stations Turret 2 with 12 Stations Sub Spindle C Axis – Sub spindle Stroke 0.001 degree Accessories: Hydr. Chuck Mainspindle 300 mm dia Hydr. Chuck Supspindle 250 mm dia Various toolposts. Chip conveyor. Coolant. Gantry loader Length: 4850 mm + portal , Height: 2000 mm, Width: 3000 mm, Weight: 10.200 kg

Stock number: 3724 CNC LATHE Manufacturer: GILDEMEISTER, Type: GDM 42 / 2A Machine NO.: 45881, Year of construction: 1989 Specifications: circulation diameter 185 / 290 mm dia. max. rotation. over bed 550 mm dia. Main engine power 22/29 kw Main spindle speed range 40-6300 - 2 step rpm Bore through drawing tube 42 mm dia. X axis movement 190 mm Z Ash movement 450 mm Tool turret with 12 VDI 3425 - 40 mm stations Total power 42.5 kW Total power consumption 45 kva Accessories: Hydraulic main centering chuck 160 mm dia. Chip conveying. Cooling water system. Length: 3300 mm, Høhe: 1800 mm, Width: 2350 mm , Weight: 5300 kg

- 6 spindles - Guide tubes Equipment according to pictures Available from week 20/2024

Cycle-controlled lathe GILDEMEISTER NEF 720 With control MANUAL PLUS 4110 Year of construction: 2001 Spindle bore: 92 mm Center width: 1500 mm Circulation O above bed : 710 mm Circulation O over face slide: 410 mm Center height: 350 mm Speed range: 36 – 1800 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix Tool Holder Coolant system 3 jaw chuck Forkhardt 0 315 mm ICP Contour Programming Tailstock with extendable drill quill Chip pan Operating instructions

CNC lathe from a school (gymnasium) in geometrically new condition with only about 5,000 on-duty hours, spindle and working hours much less. In the working area the first original lacquer! Control panel without signs of wear! Machine ready to be demonstrated under power. Manufacturer Gildemeister Type: NEF CT20 Control EPL 2 Rotary lining 12x revolver SPW 250mm Bdj9nqivc3 SPH 240mm, Orbit diameter: 280mm Circulating diameter via flat slide: 185mm, spindle passage: 32mm, Pinole stroke: 160mm Switch-on hours: approx. 5,000h, spindle and working hours much less! hydraulic tailstock 12-speed turret Conveyor Coolant device You will receive an automatic offer upon request. Counter-bid desired!

Universal lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE CONTROLLER (SIMATIC PANEL TOUCH SCREEN) Year of construction: 2001 Spindle bore: 52 mm Center width: 750 mm Circulation O above bed : 320 mm Circulation O over face slide: 150 mm Flat travel : 185 mm Speed range: 14 – 3550 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix Tool Holder Coolant system 3 jaw chuck 0 200 mm Tailstock with retractable quill Chip pan Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN VERY GOOD CONDITION

Cycle-controlled lathe GILDEMEISTER NEF 520 With control MANUAL PLUS 4110 Year of construction: 2005 Spindle bore: 70 mm Center width: 1000 mm Circulation O above bed : 500 mm Circulation O over face slide: 290 mm Center height: 250 mm Speed range: 10 – 3050 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed Sauter Revolver VDI 30 30 VDI 30 tool holders 2 driven tools VDI 30 1 collet chuck Coolant system 3 jaw chuck Röhm 0 250 mm 19 set of soft jaw inserts ICP Contour Programming Tailstock with extendable drill quill Chip pan Operating instructions

CNC lathe GILDEMEISTER CTX gamma 1250 With control control Siemens 840 D SL with Shop Turn Year of construction: 2009 Travel in X: 480 mm Travel in Z: 1300 mm Spindle bore: 102 mm Turning diameter max. 700 mm Speed range: max. 2500 rpm With the following accessories: Slide protection with interior lighting (automatic sliding hood operation) 12-speed turret with 12 driven tool stations 50 tool holders VDI 50 3 Driven Angle Heads, 2 Driven End Heads C Axis & Spindle Brake (Hydr.), Partial Hollow Clamping Device Tension Tube 104 mm 3 Jaw chuck SMW Autoblock hydraulic (0 500) Direct Displacement Measuring System (X Axis) Tailstock with quill Signal light 4 coloured DMG Netservice on board Coolant system 980 l 8/20 bar with belt filter system Conveyor Coolant spray gun Operating instructions

Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Cmvlgfoyc - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide

Gildemeister 6 Spindle Lathe AS 32-6 - Spindle stop set-up - Pneum pick-up device. - Zubehoer at an extra cost - Cross hole drilling - Thread cutting gears - Thread cutting device - wahlw. Fraeseinrichtung Querschl. - Spaenefoerderer

Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Sowiabeb - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide

Gildemeister Multispindle Slot machine 6- Spindler Type: AS 25-6 Pick-up device back-valued processing pneumatic stop Balluff cam switch IEMCA PRA Bar loader Oil mist separator (electrostat.) Conveyor Machine has been retrofitted in the past

CNC lathe Gildemeister CTX 400-Series 2 - Control/Heidenhain CNC Pilot - Max. circulation diameter / face carriage 470 mm - Max. circulation diameter / bed 570 mm - Max. turning length 600 mm - Infinitely variable speed 25-5000 rpm - Rapid traverse 20/24 m/min - Spindle bore approx. 79mm - Chuck diameter max. 250mm - Disc turret - Cross-section max. 20/20mm - Morse taper tailstock MK4 -Conveyor 9oxqtvdvxq Dimensions approx. LxWxH 5.5x2.5x1.7 meters Weight approx. 5700 kg

Year 2003, Heidenhain iT control system, TurnPlus control extension Tool drive C-axis approx. 4000 spindle hours Turning diameter 300 mm above bed 505 mm Longitudinal stroke Z 635 mm Spindle bore 68.5 mm, max. spindle speed 5000 rpm,  AC main drive21 kW Bar machining package consisting of: - Hydr. Hollow clamping device, tension tube inside max. 67 mm - Workpiece pick-up device - Indicator light Connection for bar loading magazine or bar feeder Accessories: chip conveyor, power chuck Berg KH 200/68              Tailstock, coolant spray gun, partial hollow clamping device l Technical documentation. The machine is still in use and is available for approx. available at the end of December 2023.

Year of construction 2001 Siemens Sinumerik 840D driven tools turning diameter 100 mm rotation length 320 mm Rod diameter max.: 36 mm Spindle speed 40 - 8000 rpm Working range X1/Z1 220/320 mm Working range X2/Z2 120/345 mm Distance between spindles 580 mm Spindle head size: 140H5 mm Spindle bore: 50 mm Rapid traverse X1,2/X3/Z 30/20/30 Spindle diameter in the front bearing: 120 mm Conveyor Coolant device Bar loader Weight approx. 6000 kg

Controller FANUC 16i-TB Main and counter spindle: max. rod diameter 12 mm max. speed 12,000 1/min Travel: X1 (linear)= 30, Y1= 195, Z1= 120 mm Y2= 180, Z2= 180 mm Tool holder 1: 5 tools, 4 of which are driven Tool holder 2: 8 Tools Bar feeder FMB minimag 3200

Year of construction 2007 Control Siemens 840D Rotational diameter. [mm] 640 Turning length [mm] 1500 Main Spindle: Motor Spindle Technology Speed 5,000 rpm Power 35 kW Torque 370 Nm C-axis 0.001° Bar passage 65 mm Workpiece clamping 3-jaw chuck, Schunk ROTA NCF plus 315-104 Counter spindle: Motor Spindle Technology Speed 5,000 rpm Power 35 kW Torque 370 Nm C-axis 0.001° Bar passage 65 mm Workpiece clamping 3-jaw chuck, Schunk ROTA NCF plus 315-104 Travel in Z 1,500 mm Tool carrier I (X/Y/Z/B): Technology Milling spindle on cross slide Speed 12,000 rpm Power 22 kW Torque 100 Nm Tool holder HSK-A63 Travel X/Y/Z 550/220/1,585 mm Rapid traverse in X/Y/Z 40/24/70 m/min B-axis 240° Tool carrier II (X/Z): Technology Star turret with 12 stations Tool holders VDI40 Tool drive 4,000 rpm, 10.7 kW, 32 Nm Travel in X/Z 225/1,400 mm Rapid traverse in X/R  ...

4x compound slide - Pos.1; Pos.2; Pos.4; Pos.5 4x indipenden feed - Pos.1; Pos.2; Pos.4; Pos.5 threading device 1x threading spindle pick-up spindle broaching device set of cams set of collets bar-loader Cucchi Giovanni (YOM 2004)

Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 – 6 A/C Machine no.: 7.0176 Year of construction: 1987 Weight: 11t General / technical data: Portal-6spindle automatic lathe with measuring device and automatic feeding Spindle dividing circuit: 300mm Number of longitudinal slides: 6 Number of cross slides: 2 gr. cross slide stroke: 60mm gr. longitudinal slide stroke: 125mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Stepless 1.95 – 78 sec. Low time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20kW; Feed rates 8kW Installation area: approx. 1720 x 4700mm Remark: The machine cannot be converted for bar work. Equipment: – 1 creep gear drive for set-up operation – 1 automatic central lubrication device – 1 coolant device with lines and pu ...

BRAND: GILDEMEISTER YEAR: 2006 MODEL: GD 16 APPLICATION TYPE: TURNING LOCATION: AUSTRIA MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 1950 MM MEASUREMENTS DEPTH: 1100 MM MEASUREMENTS HEIGHT: 1800 MM MACHINE WEIGHT: 1600 KG CONTROL UNIT BRAND: FANUC MODEL: 18I T MAIN DRIVE SPINDLE SPEED RANGE: 8000 1/MIN SPINDLE MOTOR POWER: 1,5/2,2 KW NUMBER OF AXIS: 5

For sale: Gildemeister CNC lathe type Sprint 65 Linear equipped with a Fanuc 310I control. This CNC lathe is equipped with 2 equal spindles with a bar passage of 65 mm. The machine also has three turrets with 12 positions where you can place driven holders in any position! The upper turret is equipped with a Y-axis with a displacement of 80 mm ( (+50, - 30 mm). The turning diameter is 205 mm. The maximum turning length is 650 mm. The movement X1, X2, X3 is 165mm, the Z1 axis movement is 220mm, the Z2 axis movement is 150mm, and the Z3 axis movement is 768mm. The W2 axis movement is 690 mm and the maximum rapid traverses are 30 meters/min. The maximum speed of both spindles is a speed of 5,000 rpm and both spindles have a full C-axis. The tool holder holder on all turrets is VDI-30. The machine is also equipped with a hinged belt chip conveyor with right ejection and the machine has an Ir ...

- Control: FANUC 32i - max. rod Ø: 65 mm - Turret with 12 stations (not driven) - Speed 5,000 1/min -Tailstock -Conveyor - without air filter - Bar feeder TOP-Automazioni XF 475 - Max. bar length 4,200 mm

CNC lathe Manufacturer Gildemeister Type NEF CT 40 Year of construction Control EPL 2 Tailstock Center width approx. 600mm Turning diameter 400mm 12-speed revolver VDI 30 incl. div steel holder and lathe chuck Machine still rotates to 0.001mm accuracy, main drive motor renewed 2 years ago.

BRAND: GILDEMEISTER YEAR: 1999 MODEL: GLD 25L APPLICATION TYPE: TURNING LOCATION: FRANCE MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 2000 KG CONTROL UNIT BRAND: FANUC MODEL: CNC

BRAND: GILDEMEISTER YEAR: 2001 MODEL: NEF 320 K APPLICATION TYPE: TURNING LOCATION: GERMANY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 1440 MM MEASUREMENTS DEPTH: 2600 MM MEASUREMENTS HEIGHT: 1440 MM CONTROL UNIT BRAND: SIEMENS MODEL: SINUMERIK MAIN DRIVE NUMBER OF SPINDLES: 2 SPINDLE SPEED RANGE: 14 - 3550 1/MIN NUMBER OF AXIS: 2 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - SWING OVER BED : 320 MM - SWING OVER SLIDE : 150 MM - CHUCK DIAMETER: 200 MM - FACE TRAVEL :185 MM - CENTRE DISTANCE: 750 MM - SPINDLE MOUNTING MK6

Multi-spindle lathe (8 spindles) max. rod diameter 16 mm Guide tubes 4,000 mm Conveyor

- Control: Heidenhain CNC Pilot 3190/4290 - Software update Turn-Plus - Turning diameter: 500 mm - Turning length: max. 635 mm - Spindle speed: 25-5000 rpm - 12-speed turret, no driven tools -Tailstock -Conveyor

Matching bar feeder DMG S Loader, year of construction 2010 unused, lateral sliding device. ( original price at that time 18000,- EUR) Bought for a Guildmaster CTX 310 but never used it.

CNC vertical milling machining center Deckel Maho DMC 635 V ecoline.

BRAND: GILDEMEISTER YEAR: 2001 MODEL: TWIN 32 APPLICATION TYPE: TURNING LOCATION: HUNGARY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: SIEMENS MODEL: SINUMERIK 840D MAIN DRIVE SPINDLE SPEED RANGE: 8000 1/MIN SPINDLE MOTOR POWER: 26 KW Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - BAR CLEARANCE ON MAIN/COUNTER SPINDLE 32 MM - CLAMPING CYLINDER Ø36MM ON MAIN/COUNTER SPINDLE - 2 / 12-POSITION REVOLVER HEADS, DRIVEN TOOLING (BOTTOM-TOP DESIGN) - TURNING DIAMETER 145MM, NORMAL TURNING DIAMETER 100MM - SPINDLE DISTANCE 580 MM - DRIVEN TOOLS 3. 8 KW, 6000 RPM MAX. - WITH AUTOMATIC DOSING OPENING, PNEUMATIC OPENING

Year of construction 2006 Turning diameter max. 600 mm Center width 1,250 mm Circumferential diameter over bed 600 mm Transverse stroke 320 mm Main spindle: Speed range - main spindle max. 3,000 min/-1 Drive power - main spindle 18 kW Spindle diameter in front bearing 120 mm Spindle bore 90 mm Chuck diameter 250 mm Tool turret: Number of tool positions 8 pos. Shank cross-section 25 x 25 mm Shank diameter of the drill 32 mm Total power requirement 42 kVA Weight of the machine approx. 5.0 t Space requirement approx. 3.6 x 2.14 x 1.95 m Accessories: chip conveyor, spray gun, Schunk lathe chuck 315 mm, Tailstock MK 5

BRAND: GILDEMEISTER YEAR: 2004 MODEL: CTX 510 PRODUCTION HOURS: 36976 APPLICATION TYPE: TURNING LOCATION: UNITED KINGDOM MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 7500 KG CONTROL UNIT BRAND: FANUC MODEL: SERIES 21I-TB MAIN DRIVE SPINDLE SPEED RANGE: 20-3500 1/MIN SPINDLE MOTOR POWER: 31 KW Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - NUMBER OF TOOL STATIONS: 12 - CYLINDER SHAFT DIAMETER: 40 MM - TAILSTOCK TRAVEL, AUTOMATIC: 850 MM - TAILSTOCK QUILL STROKE: 150 MM - QUILL DIAMETER: 120 MM

Year of construction 2014 Control Siemens 840 Dsl Main Spindle: Motor Spindle Technology Speed 7,000 rpm Power 16 kW Torque 75 Nm Bar passage 50 mm Workpiece clamping collet chuck, Hainbuch Kombi Axfix Gr. 52 Counter spindle: Motor Spindle Technology Speed 7,000 rpm Power 16 kW Torque 75 Nm Workpiece clamping collet chuck, Hainbuch Kombi Axfix Gr. 52 Tool carrier I (X/Y/Z): Technology turret with 12 stations Tool holder VDI 25 Tool drive 8,000 rpm, 1.5 kW, 10 Nm Travel in X/Y/Z 165/70/360 mm Rapid traverse in X/Y/Z 30/15/60 m/min Tool carrier II (X/Y/Z/B): Technology turret with 12 stations and swivel axis Tool holder VDI 25 Tool drive 8,000 rpm, 1.5 kW, 10 Nm Travel in X/Y/Z 215/70/740 mm Rapid traverse in X/Y/Z 30/15/60 m/min B-axis -23.5°/158.5° Tool carrier III (X/Y/Z): Technology turret with 12 stations Tool holder VDI 25 Tool drive 8,000 r ...

BRAND: GILDEMEISTER YEAR: 1998 MODEL: CTX 400 S2 PRODUCTION HOURS: 65655 APPLICATION TYPE: TURNING LOCATION: GERMANY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 4527 MM MEASUREMENTS DEPTH: 1940 MM MEASUREMENTS HEIGHT: 1730 MM MACHINE WEIGHT: 5140 KG CONTROL UNIT BRAND: HEIDENHAIN MODEL: CNC PILOT 3190/4290 MAIN DRIVE SPINDLE SPEED RANGE: 25-5000 1/MIN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - TURN LENGTH: 635 MM

BRAND: GILDEMEISTER YEAR: 2006 MODEL: SPRINT 42 LINEAR APPLICATION TYPE: TURNING LOCATION: ITALY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: FANUC GINDUMAC ID: IT-TUR-GIL-2006-00001 Technical Information GENERAL DATA MEASUREMENTS WIDTH: 5026 MM MEASUREMENTS DEPTH: 2036 MM MEASUREMENTS HEIGHT: 1922 MM CONTROL UNIT BRAND: FANUC MODEL: 160I MAIN DRIVE SPINDLE SPEED RANGE: 6500 1/MIN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - INSTALLATION OF GILDEMEISTER SPRINT 42 LINEAR TOOL STRESS PROGRAM - MAX. BAR DIAMETER: 42 MM

Gildemeister CTX Beta 500, Year of construction 2009, Control Heidenhain IT Plus, Travel X/Z 300/550 mm, Y axis +/- 60 mm, Main spindle up to 5,000 rpm, C axis, rods Ø up to 77 mm, 16-speed revolver, VDI 30, Addressed. Tools Interface Bar Feeder, programmable tailstock, Chip conveyor, three-jaw chuck Ø 250mm, 7,200 spindle hours, Accessories