used FERROMATIK for sale

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 30 t Year of construction: 2003 Screw diameter: 18 mm Spec. Spray pressure: 2500 bar Clamping unit: 300/... Clamping force: 30 t Lights spar spacing: 300 x 300 mm Aperture travel: 250 mm Max. plate spacing: 330 mm Ejector travel: 140 mm www.europnet.eu

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 60 t Year of construction: 2000 Injection unit: .../111 Screw diameter: 25 mm Spec. Spray pressure: 2253 bar Clamping unit: 600/... Clamping force:: 60 t Lights spar spacing: 355 x 355 mm Ejector force: 34 kN Aperture travel: 420 mm Max. plate spacing: 620 mm Ejector travel: 165 mm Fuel tank capacity OIL: 190 l www.europnet.eu

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 75 t Year of construction: 2003 Screw diameter: 30 mm Spec. Spray pressure: 2500 bar Clamping unit: 750/... Clamping force: 75 t Lights spar spacing: 405 x 380 mm Aperture travel: 320 mm Max. plate spacing: 480 mm Ejector travel: 250 mm www.europnet.eu

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 200 t Year of construction: 2007 Screw diameter: 40 mm Spec. Injection pressure: 2329 bar Clamping unit: 2000/... Clamping force:: 200 t Lights spar spacing: 750 x 750 mm Aperture travel: 700 mm Max. plate spacing: 1000 mm Ejector travel: 260 mm www.europnet.eu

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 85 t Year of construction: 2006 Screw diameter: 25/30 mm Spec. Spray pressure: 2253/2289 bar Clamping unit: 850/... Clamping force:: 85 t Lights spar spacing: 420 x 420 mm Aperture travel: 550 mm Max. plate spacing: 750 mm Ejector travel: 300 mm www.europnet.eu

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 60 t Year of construction: 2006 Injection unit: .../111 Screw diameter: 18/25 mm Spec. Spray pressure: 2236/2253 bar Clamping unit: 600/... Clamping force:: 60 t Lights spar spacing: 355 x 355 mm Ejector force: 32 kN Aperture travel: 420 mm Max. plate spacing: 620 mm Ejector travel: 120 mm Fuel tank capacity OIL: 190 l www.europnet.eu

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 60 t Year of construction: 2003 Injection unit: .../111 Screw diameter: 18/25 mm Spec. Spray pressure: 2230/2253 bar Clamping unit: 600/... Clamping force:: 60 t Lights spar spacing: 355 x 355 mm Ejector force: 34 kN Aperture travel: 420 mm Max. plate spacing: 620 mm Ejector travel: 110 mm Fuel tank capacity OIL: 190 l www.europnet.eu

Type Injection Moulding Machine Category Plastic Processing Brand Ferromatik Year 1999 Condition Used Location Switzerland Machine Specifications Controller NA Clamping Force 110 Ton Screw Dia. 40 mm Machine Description This Ferromatik Milacron K110 S D0gzkm Injection pressure 2240 bar Distance between tie bar 470 x 470 mm Closing force 1100 kN injection molding machine was manufactured in 1999. Production hours 24'456. Mold opening stroke 550 mm Screw diameter 40 mm. Weight of the machine 5'500 kg

2 - K machine

BRAND: FERROMATIK YEAR: 2000 MODEL: K-TEC400S APPLICATION TYPE: INJECTION MOULDING LOCATION: SPAIN MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: IQT 33 Technical Information CONTROL UNIT BRAND: IQT 33 INJECTION UNIT SCREW DIAMETER: 60 MM INJECTION PRESSURE: 175 DAN/CM2 BAR CLAMPING UNIT CLAMPING FORCE: 4000 KN

This Ferromatik K-TEC 60 S Injection moulding machine was made in 2006 in Germany. It has a clamping force of 600 kN and screw diameters of 18mm (vertical) / 25mm (horizontal). Operation hours are at 75874h.

This Ferromatik Milacron K-TEC 60 S Injection moulding machine was made in 2000 in Germany. It has a clamping force of 600 kN and a screw diamter of 25 mm. The operating hours are at 12968h.

This FERROMATIK Europe Elektra 300 Injection moulding machine was made in the year 2009 in Germany and has 58222 production hours. It is equipped with a Ferromatik-Multi-Mikroprozessor control unit. The machine has a clamping force of 3000 kN.

This FERROMATIK MILACRON k-tec 40 S Injection moulding machine was manufactured in the year 2004 in Germany. The machine has a clamping force of 400 kN.

This Ferromatik Milacron ELEKTRA evolution / EE 30 Injection moulding machine was made in 2003 in Germany. It has a clamping force of 300 kN and a screw diameter of 18 mm. Operation hours are at 88999h.

This FERROMATIK Milacron K-Tec 85 Injection moulding machine was manufactured in the year 2006. The machine has a clamping force of 850 kN and a screw diameter of 25 mm.

This Ferromatik Milacron K-TEC 200 S Injection moulding machine was made in 2007 in Germany. It has a clamping force of 2000 kN and a screw diameter of 40 mm. The operating hours are at 65545h.

This Ferromatik Milacron K-TEC 60 S Injection moulding machine was made in 2003 in Germany. It has a clamping force of 600 kN and screw diameters of 18 mm (vertical) and 25mm (horizontal). Operation hours are at 96555h.

This Ferromatik Milacron EE 75 Injection moulding machine was made in 2003 in Germany. It has a clamping force of 750 kN and a screw diameter of 30 mm. The operating hours are at 96694h.

This FERROMATIK Magna T (MTs) - 275 Injection Moulding Machine was made in the year 2018. It has a clamping force of 2750 kN and a column spacing of 660 x 660 mm. Max. plate distance is 1560 mm and mould installation height 400 - 950 mm. The opening stroke is at 610 mm. This injection moulding machine is equipped with a ENDURA touch control and a 1540 injection unit with 50mm screw diameter. It comes with 2x hydraulic core pullers (2-fold). See full original tech specs as PDF (DE) attached. Automation solution can be purchased additionally upon request.

Ferromatik K140-S Injection moulding machine Year : 1997 Weight : 9300 kg clamping force : 1400 kN voltage: 230 motor outputs power : 44,7 kW minimum moulding size in mm : 200 mm mould opening size : 750 mm (950 mm) tie bar distance : 500 x 500 mm maximum produce parts with a shot size 254 ccm / 216 gramm oil to fill in : 400 l hours of Production : 137,000 working Condition : good special features : 2 pcs. hydraulic core pull 4 pcs. air valves hot runner 16 zones color feeder connectivity option

Manufacturer Ferromatik Model K275-s Year 1998 Clamping Force 2750 kN International dimensions 2750 H-1636 Injection pressure 1575 bar screw diameter mm 80 injection volume cm³ shot capacity gr 1450 injection pressure bar 1575 Stroke volume 1040 cm3 Motor 55 kw Heating 22.7kw Weight 13.6 T

Closing unit Clamping force [kN] 10000 Dimensions of mounting plates (hxv) [mm] 2000 x 1605 Clearance between columns (hxv) [mm] 1550 x 1200 Min./max. mold height [mm] 500 / 1300 Maximum opening width [mm] 2400 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 2799 Injection weight [g] 2407 Injection pressure [bar] 2300 Electrical and hydraulic equipment Rated power of the pump motor [kW] 150 Heater power [kW] 44.1 Dimensions and weight Net weight with control cabinet [t] 52000 Dimensions (length x width x height) [m] 10.45 x 3.18 x 2.82 Injection molding machine included with the Apex robot

Ferromatik All-Electric Elektra series machine Control panel : IQT Injection Shot Weight (mm) : 120 Robot Interface : Euro Robot Interface: Yes Ejector Back Verification: Yes Interface For Colour Feeder: Yes Intergrated Hot Runner System: No Solonoid Operating Pneumatic: Yes Pneumatic Delivery Chute: No Shut-Off Nozzle: No Core Pulls: No

FERROMATIK KTEC 110S Year of manufacture: 2003 Injection unit: 493 Screw diameter: 40 mm Screw length L / D: 20 Theoretical injection volume: 201 cm³. Maximum injection pressure: 2240 bar Max. injection rate: 570 cm³ / s Max. screw rotation speed: 260 min-1 Closing unit Clamping force : 1110 kN Min. mould thickness: 250 mm Max. opening stroke: 550 mm Max distance between platens: 800 mm Distance between tie bars: 470 x 470 mm Platen size: 690 x 690 mm General Pump motor power: 22 kW Heating power: 12.7 kW Total installed power: 31 kW Oil quantity: 290 l. Dimensions (length x width x height) : 5 x 1.6 x 2 m. Weight : 5500 Kg Visible without power Press failure, CPU problem. Option : Pressure accumulator 2 hydraulic cores 2 pneumatic valves Euromap 12