used ALZMETALL for sale

Column Drilling Machine ALZMETALL AB3 ESB Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Rotative table at 360° Automatic Descent 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg

Column Drilling Machine ALZMETALL NOLL Spindle: CM3 Spindle exit: 160 mm Table size: 500 x 400 mm Maxi distance spindle nose/table: 600 mm Throat depth: 290 mm Splindle speed by belt variator Spindle motor: 1,3 kW Manual descent 2 speed ranges Superior protection cover is missing Voltage: 380 V Width: 700 mm Depth: 900 mm Total height: 1900 mm Weight: approx 600 kg

Drilling capacity steel/GG: 40/55 mm Spindle holder: 4 MK Projection: 345 mm Table size: 450 x 600 mm Quill stroke: 180 mm Spindle speeds: 30 - 760 rpm Feeds: 0.15; 0,2; 0.3 & 0.36 mm Drive motor: 380 V, 2.3/3.4 kW Space requirement: 1150 x 730 x 2000 mm Weight: 600 kg

Control Heidenhain iTNC 530 Travel x/y/z 600 mm / 400 mm / 600 mm Tool changer with 24 positions Table clamping surface / max. table load 450 mm x 750 mm / 500 kg Spindle speed range / tool holder 50 – 9,000 rpm / SK 40 Rapid traverses up to 40 m/min Total power requirement / machine weight 13 kW / 3.2 t Machine dimensions L/W/H 2.7 m / 1.8 m / 2.8 m Accessories: Chip collection device, electronic handwheel, IKZ, 3D touch probe

with NC round table WALTER 1000 mm, see pictures

see side sheet below, with 2-spindle drill head Franz X. LINDNER SBS-2/2, spindle distance 300 mm, (translation 1:1)

Used Column Drilling Machine Int. Art. Ref. m3530 Manufacturer: Alzmetall Type AB3/ES Projection 300 mm Weight approx. 400 kg Total height approx. 1.80 m Speeds 80 - 1,400 rpm. Recording MK 3 Drill chuck 1 - 13 mm max. drilling depth 120 mm New quill spring installed Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies ...

Multi-stand drill Prior sale reserved - errors possible Internal Reference Number: D-1143-1

offer 22326 Specifications: - Drilling capacity in steel ST 60 35 mm - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 170 mm - Projection 345 mm - Rotary table with 2 T-slots 550 mm - distance table – drilling spindle 650 mm - distance base plate – drilling spindle 1000 mm - Feed rates 0.09 - 0.16 - 0.28 mm/rev - AZ transmission continuously variable with manual transmission - Drilling spindle speeds infinitely adjustable 40 - 720 rpm -Right. - Left-hand rotation - Drive 400 V / 2.5 kW -Lighting - Coolant device - Space requirement approx. W 750 x H 1950 x D 1000 mm - Weight approx. 700 kg

Specifications: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 long spindle - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable approx. 140 - 1600 rpm - 3 feeds 0.1 ; 0,2 ; 0.3 mm/U - Projection 290 mm - max distance table - drilling spindle 620 mm - Rotary table with 2 T-slots 450 mm - Height adjustable via rack and pinion with hand crank - Coolant device - Drive 380 V / 0.9 / 1.3 kW - Space requirement approx. W 750 x H 1900 x D 700 mm - Weight approx. 280 kg

Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 55 mm - Thread cutting device - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Extension 350 mm - Height-adjustable with 2 T-slots 720 x 560 mm - max. Distance table - drilling spindle 550 mm - max. Distance machined base plate - drilling spindle 1140 mm - Column diameter 200 mm - Feed-electromagnetic 0.15 0.2 - 0.3 - 0.36 mm/U with overload protection - Drilling spindle speeds infinitely adjustable 60 - 210 + 210 - 765 rpm - Drive 400 V / 2.3 / 3.4 kW - Lighting - Quick-release drilling chuck - Space requirement approx. W 750 x H 2050 x D 1050 mm - Weight approx. 850 kg

High-performance column drilling machine Offer number: 17469 Make: ALZMETALL Type: AB 4 SV Machine No: 18498 Built: 1987 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Thread cutting device - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with pre-bedding - Level 1 - 80 - 210 rpm - Level 2 - 210 - 765 rpm - Extension 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - hydr. Feed cylinder for semi-autom. Workflow + Rapid Response - Table with 2 T-slots 720 x 360 mm - height-adjustable via rack with hand crank - max. distance table - drilling spindle approx. 780 mm - maximum distance machined base plate - drilling spindle 1250 mm - Lighting - Coolant device - Swivel arm control panel - Drive 400 V 4 kW - Space requiremen ...

Drilling capacity steel/GG: 28/32 mm Spindle holder: 3 MK Projection: 250 mm Table size: 400 x 415 mm Quill stroke: 120 mm Spindle speeds: 140 - 2000 rpm Drive motor: 380 V, 1.1/1.3 kW Space requirement: 830 x 420/600 x 1790 mm Weight: 210 kg

Drilling capacity steel/GG: 40/55 mm Spindle holder: 4 MK Projection: 345 mm Table size: 500 Ø mm Quill stroke: 170 mm Spindle speeds: 80 - 710 rpm Feeds: 0.09/0.16/0.28 mm Drive motor: 380 V, 2.2/2.5 kW Dimensions: 1070 x 500 x 1940 mm Weight: 620 kg

Specifications: - Drilling capacity in steel ST 60 35 mm - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 170 mm - Projection 345 mm - Rotary table with 2 T-slots 550 mm -Max. Distance table – drilling spindle 650 mm -Max. Distance base plate – drilling spindle 1000 mm - Feeds 0.09 - 0.16 - 0.28 mm/rev - AZ continuously variable transmission with manual transmission - Drilling spindle speeds infinitely variable 80 - 720 rpm - Drive 400 V / 2.5 kW -Lighting - Quick-action drill chuck - Space requirement approx. W 750 x H 1950 x D 1000 mm - Weight approx. 700 kg

- Table size: 400 x 300 mm - Quill stroke: 180 mm - Drilling capacity: 35 mm - Speed range: 110 - 1450 rpm - Spindle mount: MK3 - Total power: 0.8 kW - Machine weight: 350 kg - Space requirements (W x D x H): 1.2 x 0.9 x 2.0 m - Condition: very good Details runs smoothly, can be used immediately Accessories Vice, 3 chucks

Alzmetall ABHST MK 5 Masch.Nr. 246

Alzmetall AB4SJ Tool holder MK4 automatic feed with 3 feed speeds 2 shoot stages and infinitely variable speed control right left barrel, thread cutting device Cooling agent device in the foot Round table with holes without rev counter Machine hood modern made of plastic with cracks and loechers Speed: 80-710 rpm Table diameter: 450 mm Max distance from spindle to foot: 1200 mm Extension to center spindle: 170 mm Machine hoe approx. 200 cm Bt323s8 SPECIAL PRICE due to visually poor condition according to photos, technically usable condition, the drill is not locked at the shaft drill spindle tool holder in the rotational motion (see photos). If the drill is not firmly in the drill spindle, it rotates through. Special price

Electromagnetic feed in 3 speeds Tool holder: MK 4 Speed display with infinitely variable adjustment Coolant pump 2 motor speeds

Tool holder MK 40 Drilling capacity up to 40 mm steel Threading device Infinitely variable speed adjustment with digital display Digital drilling depth indicator Electromagnetic feed Coolant pump

Feed in 3 speeds Tool holder: MK 4 Infinitely variable speed adjustment

Drilling capacity in ST 60 45 mm Drilling capacity in ST 60 60 mm 12 speeds 26 – 980 rpm pure gearshift ! Motor power 3 kW Short Spindle MK 4 4 drill feeds 0.10 / 0.15 / 0.20 / 0.30 mm/rev Radius approx. 330 mm Spindle stroke 200 mm Table size, W x D approx. 730 x 590 mm incl. border Dimensions, W x D x H max. approx. 0.8 x 1.15 x 2.5 m Weight approx. 1.1 to

Specifications: Tool holder: MK 4 Drilling capacity in ST 60: ø 25 mm Drilling capacity in cast iron GG 20: ø32 mm Tapping performance in ST 60: M24 Tapping capacity GG20: M30 Speed range: (12) 102 - 2000 1/min Spindle stroke: 150 mm Feeds: 0.1 / 0.2 / 0.3 mm/rev Table size: 1175 x 525 mm Column diameter: 170 mm Motor power: 1.1 / 1.5 kW Connection: 400 V Weight, approx.: 2200 kg Dimensions (WxDxH), approx.: 1300 x 1620 x 2270 mm Equipment: - Machined foot with T-slots - Feed device - R- L- Barrel - Tapping device - Emergency stop push button -Chuck -Vice - Machine wedge shoes - Swivel machine table - Dice table - Base plate with T-slots - Machine lamp

- Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - Projection 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm. - Operating voltage 380V-50Hz - Infinitely variable speed adjustment, by means of an adjustment lever - Engine speed in 2 stages, 700/1435 rpm - Tapping device with rotation direction change after reaching the end stops - Coolant device fully installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - Precision machine vice new (test winner)

Box column drill Alzstar 40S 16 A 380 V Speed 160 - 2250 rpm Length 1 m Width 0.80 m Height 1.80 m Weight 270 kg Work lamp Color: White

5-Axis CNC Machining Center Alzmetall GS 600 E/5 Year of construction: 2019 Control: Heidenhain TNC 640 x-travel: 460 mm Y-travel: 600 mm z-travel: 400 mm a-travel (swivel axis): -140 / +140 c-travel (axis of rotation): 360° Table surface: Ø 320 mm Spindle: HSK 63 A Rapid traverse: 30 m/min Speed: 18,000 rpm Tool changer: 76x Space requirements: 2.5 x 2.2 x 2.2 m Weight: Approx. 7,000 kg

Column drilling machine Manufacturer Alzmetall Type AC25/AS Year of construction 1995 comes from a disabled workshop, was never used Main drive 1,1kW 1,000rpm Speed range main spindle two stages 75 - 5,800 rpm Feed drive automatic infinitely variable Feed speed 1 - 3.500mm/min Rapid traverse 3.5 m/min Tool holder MK3 Spidelkopf D 43mm Quill stroke 120mm Projection 295mm Column diameter 120mm Table clamping surface 390 x 420mm Number of T-slots x width x spacing 4 x 14 x 100 Table stroke 665mm Distance spindle-table max 665mm Distance spindle to bearing base plate 1020mm Base plate 765 x 475mm Machine height 1905mm, weight 380kg Coolant device, operating instructions incl. electrical wiring diagram Machine is in top condition.

Morse cone MK 3 Drilling performance: Steel 28 mm Casting 32 mm Ihivikt Extension 700mm 3 Pre-shed0.1 - 0.2 - 0.3 mm/U 15 Spindle speeds 50 - 1220 rpm Spindle stroke 165mm max. distance spindle - base plate 1300 mm max distance spindle clamping block approx. 800mm Dimensions clamping cube 470mm550mm500mm high Clamping area foot 870700mm Hoe adjustment boom approx. 620 mm Spindle motor 1.1 / 1.7 kW Lifting motor 0.55 kW Outside mass: Length 1400 mm; width 700 mm; height 2300 mm Weight approx. 1100 kg

Column drill Alzmetall

Alzmetall AB 5/S Column Drilling Machine Infinitely variable speed via PIV chain drive with 2 gear stages, Speed range Level I 40 rpm to 180 rpm Speed range Stage II 150 rpm to 800 rpm Drilling capacity in steel: 50mm Feeds: 0.1 / 0.14 / 0.2 / 0.28 / 0.28 / 0.4 mm/revolution Quill stroke: 240mm Quill diameter : 85mm Column diameter : 220mm Projection : 385mm Recording: MK 5 Table surface 880mm x 670mm Rigid table with T grooves (19mm) mechanically clamped, height adjustable via rack and pinion Dimensions : 2650mm x 880mm x 1700mm More items - new and used - can be found in our shop! International shipping costs on request!.

- mounting table: 300 x 400 mm - quill ram: 120 mm - speed range: 5800 rpm - gearbox stages: 2 - feed: 0,001 - 3,5 m/min - rapid: 3,5 m/min - taper fixture: MK 3 - thread cutting device with foot switch - coolant system - total power: 1,5 kW - weight of machine: 380 kg - space requirement (W x D x H): 0,66 x 0,44 x 1,95 m - condition: very good Details High-performance drilling machine, machine number 511 accessories documentation, coolant equipment

General: Year of construction: 1993 Speed range 75 – 5,800 rpm Rapid traverses 3.5 m/min Clamping surface 390 x 420 mm Weight 380 kg

Drilling capacity in steel / cast iron 50/65 mm Drilling capacity in steel 70 mm Feed 0.1 - 0.54 mm / Rev Speed 62-1240 RPM Recording MK 5 spindle stroke (drilling depth) 240 mm Usable projection 385 mm Table 800 x 680 mm Spindle head diameter 70 mm Height 2350 mm the machine

Drilling capacity steel/GG: 18/23 mm Spindle mount: 2 MK Projection: 250 mm Table size: 250 x 370 mm Spindle speeds: 400 - 5000 rpm Drive motor: 0.48/0.6 kW Space requirements: 750 x 500 x 1670 mm Weight: 130 kg

distance spindle /table:min /max 190 / 570 mm distance spindle /table:190 - 570 mm surface area:650 x 300 mm Boring power:in GG 20 40 mm bore capacity in steel:ST 60 32 mm turning speed range::50 - 5000 UpM total power requirement:2,2 kW threading:GG 20 M30 threading::ST 60 M 24 weight of the machine ca.:1400 kg table load:max. 150 kg table height:770 mm traversing speed:max X-, Y- u. W-Achse 5 m/min max. traversing speed:Z-Achse 3 m/min w-axis:380 mm workpiece height max.:495 mm tool changing time:ca. 3 sec x-travel:450 mm y-travel:300 mm z-travel:180 mm workpiece weight:1,5 kg

Description: Column drilling machine with: - Advance - variable spindle speed - Coolant pump - Machine light Drilling capacity in steel 40 mm Projection 280 mm Drilling stroke 180 mm Recording MK 4 MK Table size 620 x 470 mm Feeds 0.1 - 0.2 - 0.3 mm/rev Speed 110 - 2900 rpm Total power requirement 1.9 KW Machine weight approx. 0.55 t Dimensions L x W x H 1.2 x 0.8 x 2.1 m weight approx.: 550 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,100 mm

Description: Automatic feed Spindle speeds infinitely adjustable footswitch Drilling capacity in steel 50 mm Projection 380 mm Drill stroke 240 mm Recording MK 4 MK Table size 660 mm Feeds yes mm/rev Speed 40 - 800 rpm Total power requirement 4.0 KW Machine weight approx. 0.85 t Dimensions L x W x H 1.2 x 0.8 x 2.45 m weight approx.: 850 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,450 mm

Description: 3 phase A.C. 380 V control voltage 220 V  , Approx. Onsite Dimension. (l x w x h): 1,300 x 1,250 x 2,450 mm, weight approx.: 1,420 kg

Description: Speed range: 130 - 1750 rpm Table dimensions: approx. 500 x 370 mm tool taper: MK3, weight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 900 x 630 x 1,900 mm

Description: Column drilling machine with: - variable spindle speed - Machine light Drilling capacity in steel 30 mm Projection 290 mm Drilling stroke 150 mm Recording MK 3 MK Table size 320 x 370 mm Speed 80 - 1400 rpm Total power requirement 2.0 KW Machine weight approx. 0.35 t Dimensions L x W x H 0.6 x 0.8 x 1.95 m weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 600 x 800 x 1,950 mm

Description: Serial number 37145 turning speed range: 70 - 1800 rpm, table surface area l x w : 500x370 mm, weight approx.: 470 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 1,900 mm

Description: Machine number: 627/3 Speed: 55 - 1450 rpm Table dimensions: 620 x 460 mm With vice Jaw width: 110 mm Drilling depth: up to 180 mm weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 700 x 1,900 mm

Description: Speed range: 100 - 1220 rpm weight approx.: 1,300 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 800 x 2,300 mm

Description: Serial number 18067 Includes 2nd clamping table approx. 400 x 380 mm turning speed range: 30 bis 3000 rpm, table surface area l x w : 500x370 mm, weight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 900 x 750 x 1,900 mm

Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Alzmetall, bench drill type AX2-T/S with base -Clamping table: 255 x 255 mm -Travel: 335 mm -Spindle holder: MK2 with drill chuck -Projection: 250 mm -Speed speeds: 125 - 2400 rpm continuously -Column: diameter 90 mm -Spindle stroke: 100 mm -Thread cutting device -Dimensions: 1000/700/H1740 mm -Total weight: 196 kg

Drill, pillar drill, column drill, column drill -Manufacturer: Alzmetall, pillar drilling machine type AB5/S -Engine: VKS 3 kW -Speed: 40 - 800 rpm, continuously variable right-left rotation -Feed: 0.1 - 0.14 - 0.2 - 0.28 - 0.4 mm/rev. -Table size: Ø 500 mm, travel 470 mm -Spindle holder: MK5 -Spindle stroke: 240 mm -Projection: 380 mm -Column Ø: 220 mm -Dimensions: 1450/680/H2160 mm -Weight: 1262 kg

Drill press, drill press, stand drill, pillar drill -Table size: 400 mm -spindle taper: MK4 -Projection: 320 mm -Speeds: 80-700 rpm -Columns: Ø 160 mm -Spindle stroke: 175 mm -VIP transmission -Feed: 0.09-0.28 mm/rev -Tachometer: defective -Dimensions: 1100/500/H1960 mm -Weight: 650 kg

Drill press, drill press, pillar drill press, pillar drill press, tapping machine, tapping machine -Manufacturer: Alzmetall, column drilling machine type AB3ES -Motor: 0.9/1.3 kW -Speeds: 65 - 1750 rpm, infinitely variable -Table size: 300 x 400 mm, travel 550 mm -Spindle mount: MK3 -Spindle stroke: 165 mm - Projection: 290 mm -Columns Ø: 115 mm -Dimensions: 900/560/H1840 mm -Weight: 336 kg

Drilling machine, pillar drilling machine, pillar drilling machine, pillar drilling machine, tapping machine, thread cutting machine -Manufacturer: Alzmetall, column drill type AB 3 ESV -Motor: Loher 1.5 kW -Speeds: 110 - 1450 rpm, continuously right-left rotation -Feed: 0.1/0.2/0.3 mm/rev. -Table size: Ø 370 mm, travel 735 mm -Spindle mount: MK3 -Spindle stroke: 170 mm -Throat: 280 mm -Column Ø: 130 mm -Dimensions: 940/650/H1830 mm -Weight: 398 kg with pallet