similar results found in category packing machines
LEYBOLD pump level data to the pump status: RUTA - RUTA 1001 (20900895586) Pumpenystem (= 02209 Backing pump: LEYBOLD Sogevac SV300 Cat: 10931 Booster pump: Leybold Ruvac WAU1001 Cat: 11741 Condition: to see in Picture 3-6. The pump stand is completely clean newly painted and serviced in accordance with the manufacturer's specifications and tested and is 100% right, no oil leak Warranty: 3 months There are 2 x SV300 + WSU1001H available! There are 10 x SV300 + WAU1001 verguebar! Price refers to 1 PCs.; ready for operation
Leybold pump level Data on pump level:RUTA - Pump system RUTA 1001 (20900895586) (02209=Pre-pump:Leybold Sogevac SV300Cat: 109 31booster pump: Leybold Ruvac WAU1001Kat: 11741Condition: The pump level is completely cleaned and repainted and tested according to the manufacturer's specifications and is 100% fine, without oil leakPerformance: 3 months22x SV300 +WSU1001H are available! There are 10x SV300 + WAU1001 verguegable! ; ready for use
G 76 | CASE ERECTOR 3M-MATIC YEAR: 2003 SPEED: 14 PPM MODEL: 400CF/R TYPE: WITH ADHESIVE TAPE FOR AMERTICAN BOXES FORMATS: MINIMUM H 12 CM X LARG. 15 CM X LONG. 20 CM MAX H 50 CM X LARG.35 CM X LONG. 45 CM SAFETY PROTECTIONS
We sell a used stacker of the A & F brand. The size and number of the upgrade are variable adjustable (maximum height is approx. 500 mm). Asking price â?¬1500 not overtaken. Obsolete â?¬3500.-
FULL POWDER FILLING AND PACKAGING LINE COMPLETE WITH ALL CONVEYORING, GENERATORS AND 4 PALLETS WORTH OF SPARES. USED FOR POWDERED SUGAR AND FLOUR CONSISTING OF: CARTON ERECTING MACHINE TO POWDER FILLING MACHINE TO CHECK WEIGHER TO CARTON SEAL MACHINE TO LID APPLICATION MACHINE PLEASE CONTACT FOR MORE INFORMATION
width of the strips: 100 mmband length: 920 mmband speed: 7 m/secloading area: 300 x 150 mmmotor: 0,44 KWmotor: 220 Voltrange L-W-H: 470 x 370 x 210 mmFurnishing :- sanding belt- workpiece stop- Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 920 mmband speed: 7 m/secloading area: 300 x 150 mmmotor: 0,44 KWmotor: 400 Voltrange L-W-H: 470 x 370 x 210 mmFurnishing :- sanding belt- workpiece stop- Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 200 mmband length: 1490 mmband speed: 8 m/secmotor: 400 Voltloading area: 500 x 280 mmDimensions (HxWxD): 750 x 600 x 340 mmtotal power requirement: 1,5 kWFurnishing :- sanding belt- workpiece stop- Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 300 mmband length: 2070 mmband speed: 7 m/secengine output: 1,5 kWsurface of working table: 750 x 380 mmdiameter: 87,7 Führungsrollen mmtotal power requirement: 400 Voltweight of the machine ca.: 88,0 kg.range L-W-H: 1050 x 600 x 400 mmFurnishing:- metal belt grinder- workpiece stop- sanding belt- Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 45 mmband length: 850 mmtotal power requirement: 230 Volttotal power requirement: 0,18 kWband speed: 8,0 m/sek.Furnishing:- with spring tension for deburring angle material- sanding belt- Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used riser A+F AUTOMATION - Trays with round inlet - with NORDSON glue device Sightseeing and test run are possible by arrangement.
Machines for double-sided workpiece machining, especially for profiling the edges of the workpiece (postforming profiles, tongue-and-groove connections) for floor laminates and parquet) as well as for milling with large chip removal (slotted tenon connection on door and window profiles). Double-end tenon for longitudinal profiling Fabr. A. Costa 1. Vorritzer 1+1 2. Chipper (SAEGE) 1+1 3. Milling unit 1+1
Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Longitudinal profiler for A.costa Fedra floorboard Model Fedra PF10 Working length min/max 350-1400mm Working width min/max 60-100mm Working height min/max 8-30mm Feed speed adjustable 7-44m/min The machine is available on request ! Net price
Double shaft multi-blade A.COSTA model PUMA/2/40: - with motorized feeder - 350mm carpet width - useful cutting width 350mm - useful cutting height 160mm - Engines HP 40+40 - variable feed speed 5 – 22 mt/min - weight kg 3500 Machine not CE compliant
A.E.W. Engineering bandsaw, model: 400, type: MK-11, serial number: LH-164 188, 415 V, 3 Ph, 6.2 A, dimensions table: 1040 mm x 900 mm, total dimensions: 1040 mm x 1070 mm x 1900 mm.
A.E.W. Engineering bandsaw, model: 400, type: MK.11, serial number: LHS229791, 380 V, 4-7 A, dimensions: 1150 mm x 1000 mm x 1900 mm. Without saw blade.
Code 0782 Description Centerlathe Make A.I. Hembrug Model DR - 133 Serial No. DR 133 / F 4018 Year 1970 Distance between centers 750 mm Swing over bed 270 mm Swing over gap xxx mm Swing over crossslide 150 mm Spindle bore 35 mm Number of spindle speeds 28 Spindle speeds 18 – 3550 rpm Feeds Longitude and cross Motor power 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck 2 x RSF DRO Condition Machine is in normal condition.
approx. 110 pieces of frame collision protectors – used- : Price per piece ex site: 35.-€ (net)! Price for complete acceptance: 3.300.-€ (net)! Primarily complete sales! Manufacturer: A.M.P.E.R.E. Type: Rack armour Size: S = 70 – 87mm Year of manufacture: unknown Original price: approx. 80.-€ Condition: good Available: now Location: Wenkbach Rack collision protection - DEKRA tested and certified Optimum safety and perfect protection suitable for the shelf stands of almost all makes. Costs a fraction of the repair or purchase of a new shelf! Even minor damage can reduce the load-bearing capacity of the racks. Unstable shelving systems pose an extraordinary danger to people, machines and the stored products.
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Aasted Type: AT 2000 disc tempering machine for chocolate YOM: 1971 output: from 750 to 2.000 kg/hour. electrical: 380/400 VAC different: working order I offer this machine in as-is where-is condition
Used sharpening machine by AASTET type AEAN capacity 500 kg per hour. New 1978
The gas flare was intended for a research project that could not be carried out. It is brand new and in its original packaging. The torch is supplied as a complete "package unit" with an on-site control cabinet made of CrNi steel. The torch can be installed both indoors and outdoors, but the torch should be visible to the operator of the control cabinet. 1.1 Pilot burner / biogas support burner with fittings The equipment of the pilot biogas burner unit consists of the following components: - Shut-off ball valve DN25, approved for biogas - Biogas filter DN25 - Pressure regulator DN25 - Pressure gauge with "push-button shutdown", 0-100 mbar, approved for biogas - Gas solenoid valve DN 25, make: Kromschröder, type VAS 125R/LW - Flame arrester DN25, make: Protego, FA-G1" IIA1-P2,2 - Biogas burner nozzle (4 pcs.) 1.2 Process gas burners with fittings The equipment of the p ...
furnace 1200 Temperature range 10 - 1200C inner chamber dimensions 1x1x2m (possible various size) Auro door PLC Termička obrada metala, cementacija, kaljenje, poboljšanje, žarenje, otpuštanje, normalizacija, ispravljanje ručnom i hidrauličnom presom, plameno kaljenje Jamske peći sa zaštitnom atmosferom Za jamske peći sa zaštitnom atmosferom se koriste elektrootporni grejači i gasni gorionici. Mogu obavljati sledeće termičke obrade: Žarenje kaljenje otpuštanje poboljšanje rekristalizacija normalizacija Upoznavanje sa klasičnim i novim postupcima termičke obrade metalnih materijala kao što su odgrevanje, difuziono žarenje, heterogenizacija, rekristalizaciono žarenje, potpuno žarenje, meko žarenje, izotermalno žarenje, normalizacija, kaljenje sa i bez polimorfnog preobražaja, starenje i otpuštanje, sa posebnim osvrtom na postupke termohemijske o ...
Furnace 1200 temperature 10 - 1200 Celsius 2 heating zones 100kW auto door PLC Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel Ziel des Spannungsarmglühens ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeu ...
GEA Nuts pack and Prewa GEA SX400 2010 2010 good tech condition
harden furnace 1200 0.6x0.6x1.0m temperature 100 - 1200 Celsius possible various size Industrieöfen Neubauten Industrieöfen gebraucht Plasmanitrieranlagen Drehherdöfen Drehtrommelöfen Durchlauföfen Herdwagenöfen Induktionshärteanlagen Kammeröfen Ofenanlagen Schachtöfen Vakuumöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seik ...
Oven 700 1.3x1.3x1.5m Auto door PLC top quality Giessereianlagen Giessereimaschine Giessereimaschinenbau Giessereitechnik Giessereizubehör Glasschmelzöfen H aubenöfen Herdwagenöfen Hochtemperaturöfen Induktionsanlagen Industrieöfen Industrieofenanlagen Industrieofenbau Kammeröfen Keramikbrennöfen Kippofen Kupolöfen Laboratorien Laboröfen Lötofen Maschinen Muffelöfen Nachverbrennungsanlagen Öfen Ofenanlagen Ofenbau Ofenbauzubehör Prozessanlagen Prozesssteuerungssysteme Pyr lyse Pyrolyseöfen Regelungstechnik Retortenka meröfen Retortenofen Rohrofen Salzbadöfen Schmelzofen Sinteröfen Thermoprozessanlage Thermoprozesstechnik Vakuumglühofen Vakuumkamme fen Veraschungsöfen Versuchsofen Vorwärmofen Wachsausschmelzverfahren Wannenofen Wärmebehandlung Wärmebehandlungsöfen Wärmebehandlungsverfahren Wärmerückgewinnungsanlagen Warmhalteofen Poreba Gur ...
Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...
Carrying ability: max. 2,000 kg. Coil Inner Drm. max. 1,000 mm Coil Outdoor Drm. max. 1,200 mm Coil Width: max. 500 mm; ready for use
Technical specifications: Max. width 330mm Max. Rewinding speed 200m/min Max. Control speed 250m/min Max Roll weight unwinder 150kg Max. Roll weight rewinder 70kg Max. Diameter unwinder 700mm Max. Diameter rewinder 400mm Max. Paper tension 5-100N Diameter Shaft unwinder 76mm Diameter Shaft rewinder 76mm Configuration: Unwinder Guidline Splice table Stroboscope Settings module machine Controle area (AVT camera not included) Bufferzone Extra webguide Niprol modules Slitting module (razerknives) Web clamp Rewinder (Friction shaft)
ABG Omega SR 410 from 2010 with 2 flexo printing units 2 diecutters with one GapMaster from Kocher & Beck Manufacturer: AB Graphics Type: SR 410 Year of production: 2010 Flexo printing units: 2 units Rotary die cutting untis: 2 GapMaster: Yes one of the die cutters is Gapmaster Turning bar: Yes Nip rollers: Yes UV System: GEW Please contact us for more information or pricing. Machine is available immediately
Grinding length: 0 mmGrinding width: 0 mmGrinding height: 0 mmWheel diameter: 0 mmCNC Brand: 0CNC Model: 0 Technical dataVoltage 50 Hz 3x: 400 VoltTotal power required: 40 kWMachine´s weight about: 22000 kg
Grinding length: 1000 mmGrinding width: 700 mmGrinding height: 700 mmWheel diameter: 400 mmSpindle power: 75 kWCNC Brand: Abamatic ABAMATIC 1 Opperator system: Cycle controlled with Grafical output LCD Screen Manuel and Autotical cycle X - Travel: 1000mm Y - Travel: 700mm Z - Travel: 700mm Table Length: 1000mm Table Width: 600mm Table load: 1000 Feed rate X-Axis: 35000mm/min. Feed rate Z-Axis: 35000mm/min. Grinding stone dimensions:400 x 100 x 127mm Power: 7,5 (11)kW Sp ...
Grinding length: 1000 mmGrinding width: 700 mmGrinding height: 700 mmWheel diameter: 400 mmSpindle power: 75 kWCNC Brand: Abamatic ABAMATIC 1 Opperator system: Cycle controlled with Grafical output LCD Screen Manuel and Autotical cycle X - Travel: 1000mm Y - Travel: 700mm Z - Travel: 700mm Table Length: 1000mm Table Width: 600mm Table load: 1000 Feed rate X-Axis: 35000mm/min. Feed rate Z-Axis: 35000mm/min. Grinding stone dimensions:400 x 100 x 127mm Power: 7,5 (11)kW Sp ...
Gr. Grinding length: 620 mm gr. Grinding width: 250 mm table size: 200 x 620 mm grinding wheel dimensions: 200 x 220 x 51 mm Electr. Supply: 380 V, 1/1.8 kW space: 1650 x 1450 x 1800 mm weight: 1350 kg
aba FF 625 Surface grinding machine ABA Precision Surface Grinding Machine FF600/25 Grinding length 600mm Scrap width 250mm Electric Magnet 600x250mm Workpiece height 400mm Diamond puller Height adjustment digital Motor 3,27 KW 400 V 50 HZ Coolant device Grinding wheels and flanges Weight: approx. 1350 kg G&-5020-M1768
Surface grinding machine Make: ABA Type: FFU 1250 / 50 Year of construction: 1970 Magnet: 1250 x 400 mm Sanding area: approx. 1250 x 400 mm Machine dimensions: L: approx. 3700 mm, W: approx. 1600 mm, H: approx. 2500 mm Machine weight: approx. 4500 kg
Code 61063 Description Surface grinding machine Make ABA Model FFU 2000/60 Serial No. 208 125 Control Abamatic 3 Year 1986 Tablesize 2510 x 500 mm Grinding surface L x B x H 2000 x 600 x 700 mm Magnetical plate size L x B 2000 x 500 mm Speed table movement 3 – 30 m/min. Max. distance table – centre grinding wheel 900 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 50 x Ø 127 mm Spindel power 26 kW Spindel speed 1600 - 3000 rpm Motor power 26 kW – 380 Volt Total electr.com. 34 kW Total space L x W x H 7000 x 3500 x 2650 mm Weight 10500 kgs Accessoiries Elec. Magneticplate 2000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in good condition
From current stock dissolution: 0172 ABA FF 600 x 300 PU, magnet 600 x 250 mm 1242 ABA FF 350/22, magnet 350 x 150 0906 Z&B FS 2560 PV, SINUSOIDAL MAGNET 600 x 200 1469 ELB 422 NC/K, magnet 450 x 200 1524 ELB SW 6 HA, magnet 510 x 200 1817 ELB Super Ruby, Magnet 650 x 300 5272 ELB Ambassador 6/3, Magnet 600 x 300 4689 BLOHM 204 A, Magnet 450 x 200
Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg
specifications: - Clamping area approx. 400 x 300 mm - Travel across x approx. 500mm - Travel along Y approx. 300mm - 2 Handwheels - Height 220 mm - 4 T - grooves 14 mm - Distance of the T - grooves approx. 72mm - Space required approx. W 1100 x D 900 x H 220 mm - Weight approx. 190 kg
oven 1150 inner chamber dimensions 1 x 1 x 2m t max 1150 Celsius PLC Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungsöfen Abwärmerückgewinnung Aluminiumgiessereimaschinen Anlassofen Brennöfen Dentalofen Durchlauföfen Emaillierofen Fusingöfen Generatives Fertigungsverfahren Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für sbguss Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Indu ...
hardening furnace 1200 1x1x2m (possible various sizes) t max 1200C Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Industrie Trockenanlagen Kammeröfen Kunststoff - Beschichtungsöfen Carbonitrieren Afspændingsglødnng Hiærdning og anløbning Carbonisering (indsætning) Anløbning, glødning, hærdning, afhærdning, opløsningsglødning, smedning, udhærdning, forvarmning, tørring, ældning Ovne og anlæg til anløbning, glødning, hærdning, afhærdning, opløsningsglødning, smedning, udhærdning, forvarmning, tørring, ældning Varmebehandling Preshærdning Karbon ...
Furnacce 1200 hardness tester 300x300x500 mm Temperature max 1200C Ölbrenneranlagen Retortenöfen Teil Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfen Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Truhenöfen Transporttiegel für Flüssigmetall Transport - Warmhalteöfen für Flüssigbeschickung Umschmelzöfen für Aluminium Verzinkungsöfen Vergüteöfen Warmhalteöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen Tunnelofen Haubenofen Schachtofen Sonderanlagen Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmaschinen Drehherdöfen Doppelkammeröfen buerstlein Draht Glühöfen Durchlauföfen zirlguss Elevatoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder ...
Description: Type : Oil transformer Finish : Hermetic Make : CG Power System IRELAND LTD. Year of manufacture : 2018 Condition : New Rated Power : 2000 KVA Medium voltage : 20 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Gross vehicle weight : 4324 kg Oil weight : 860 Kg Mineral OIL Magpie Length : 1890 mm Width : 1200 mm Height : 1900 mm Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.
FOR SALE... OVERHAULED TURBOCHARGERS ABB VTR 254-11 & BBC VTR 214-11 TO WHOM IT MAY CONCERN; WE VE BELOW LISTED OVERHAULED & REPORTED TURBO CHARGERS AT OUR STOCK. READY TO TRANSPORT AND USE... ABB VTR 254-11 HZTL 428765P2 nNmax 523 nBmax 497 tMmax 680 C tBmax-650 C SFUSO1 YEAR OF BUILT 2010 MADE IN SWITZEWRLAND BBC VTR 214-11 NoHT 399285 their 635 Tmax 680 V 01113 R 012 H 04109 W 12206 E 03221 U 023 YEAR OF BUILT 2012 MADE IN SWITZERLAND IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CIONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY
ABB electric motor System: electric motor Condition: pre-owned Manufacturer: ABB Product code: 3GJP181410-ADG Year of construction: 2008 IP: 55 KW: 22 Speed: 2938/RPM HZ: 50 Weight: 200 kg
Servo motor with pinion, 3HAC029031 004, ABB, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in its original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.
Oven 450 inner dimensions 2x2x6m PLC Uterna / Europe custom made oven Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwagenöfen Kammeröfen Haubenöfen Drehherdöfen Thermische Nachverbrennungsanlagen forno a camera per trattamento termico alluminio forno a carro per trattamento termico alluminioforno a carro per trattamento termico alluminio forno a carro per trattamento termico alluminio forno continuo per trattamento termico alluminioforno continuo per trattamento termico alluminio forno continuo per trattamento termico alluminio linea batch per trattamento termico alluminiolinea batch per trattamento termico aliuminio forni industriali ...