The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Category: sheet metal working / Motorized Plate Bending Machines
date: 27.03.2024 add to watchlist
Machine: BWM 22/3000/3 CNC Motorized Plate Bending Machines
item-No.: 158401671
New in: 2023
new

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydrau ...

Category: sheet metal working / Motorized Plate Bending Machines
date: 23.04.2024 add to watchlist
Machine: DAVI MCO 2020
item-No.: 161723350
New in: 1994
used

sheet width: 2000 mmplate thickness: 10,0 mmpre-bending: 8,0 mmdiameter of upper rolls: 205 mmdiameter of lower rolls: 190 mmtotal power requirement: 5,5 kWweight of the machine ca.: 3500 kgrange L-W-H: 4700 x 1250 x 1300 mm- Each roller hydraulically adjustable- Conical bending device- 3 powered rollers- hardened rollers- Digital actual value display for roller position and inclination- Roller ends for attaching profile rollers- Safety device (safety line)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Motorized Plate Bending Machines
date: 26.02.2024 add to watchlist
Machine: FACCIN HAV 3162 Motorized Plate Bending Machines
item-No.: 162255270
used

Technical data of the Faccin HAV 3162 hydraulic plate calender used: Upper roller diameter: 620 mm Diameter of side rollers: 550 mm Machine dimensions: 8600 x 3500 x 3700(h) mm Weight: 90.000 kg

Category: sheet metal working / Motorized Plate Bending Machines
date: 23.04.2024 add to watchlist
Machine: FASTI 104-15-1.5
item-No.: 161680214
used

sheet width: 1520 mmplate thickness: 1,5 mmpre-bending: 1,5 mmroll diam. toproll: 80,0 mmadjustment: SW 60 mm mmtotal power requirement: 1,1 KWweight: 560 kgrange L-W-H: 2350 x 750 x 1500 mm maintained condition from a maintenance workshopFurnishing:- asymmetrical roller arrangement- crowned rollers approx. 700N/mm²- Rounding and finishing rounds in the machine- Motorized adjustment of the rear/side roller with min. & max. position value specification Adjustment by electric potentiometers Front right operation- Manual adjustment of the bottom rollers using a large hand wheel- Conical bending by tilting the lower and rear rollers- Top roller can be swung out to the front- Bending performance = bending performance- Gear motor v - 6 m/min.- 1x free-moving dual footswitch (forward and reverse)- electrical safety device- User manual (PDF) Machine link :http://mhp.logotech.de/hpm/v7/Datenblat ...

Category: sheet metal working / Motorized Plate Bending Machines
date: 23.04.2024 add to watchlist
Machine: FASTI 106-20-2.0
item-No.: 163361385
used

sheet width: 2040 mmplate thickness: 2.5 mmpre-bending: 2.0 mmdiameter of upper rolls: 110 mmside roll diameter: 110 mmdiameter of lower rolls: 110 mmspeed: 6.0 m/minvoltage: 400 Vtotal power requirement: 1.5 kWweight of the machine ca.: 1250 kgrange L-W-H: 3020 x 670 x 1010 mmFurnishing:- robust electro-mechanical three-roller drive- Driven by spur gear brake motor + countershaft- asymmetrical roller arrangement- electrical delivery of the rear roller with automatic electrical switch-off Setting min./max. travel distance possible- Rotatable control panel, front right- swing-out top roller, with folding bearing- Conical bending device- freely movable double foot switch Right/left rotation of the rollers- Manual delivery of the bottom roller using a handwheel with analogue position display- User manual (PDF) Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1 ...

Category: sheet metal working / Motorized Plate Bending Machines
date: 26.01.2024 add to watchlist
Machine: GOYAR 3C-25/20 2000X25 Motorized Plate Bending Machines
item-No.: 153109055
used
Price: 15.000 €

Mechanic plate bending machine Goyar 3C-25/20. Bending lenght: 2000mm. Bending capacity: 25mm. Diameter of upper cylinder: 285mm. Diameter of lower cylinders: 235mm. Main motor power: 20cv. Bending speed: 5 mpm. Weight: 5500Kgs.

Category: sheet metal working / Motorized Plate Bending Machines
date: 23.04.2024 add to watchlist
Machine: IMCAR SIHR 6/3
item-No.: 162197452
New in: 1996
used

sheet width: 2050 mmplate thickness: 6,0 mmpre-bending capacity: 4,0 mmupper roll diameter: 200 mmlower roll diameter: 180 mmbending speed: 5,2 m/mindiameter: ca. 280 mmwork height max.: 980 mmtotal power requirement: 5,5 kWweight of the machine ca.: 3500 kg.range L-W-H: 2900 x 1200 x 1280 mmFurnishing:- Robust electro-hydraulic 3-roller bending machine- planetary movement of the bending rollers with reduced center distance- Hydraulic motors combined with planetary gears for driving the 3 rollers- mobile operating unit, with connection cable + plug- extended roll ends for profile bending rolls- with conical bending device Inclination of the side rollers by handwheels Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50%- free-moving operation electric delivery rollers electric turning/rolling movement digital position display of the reels- h ...

Category: sheet metal working / Motorized Plate Bending Machines
date: 23.04.2024 add to watchlist
Machine: KNUTH KR 12/2.0
item-No.: 162290087
New in: 2006
used

sheet width: 1200 mmplate thickness: 2 mmpre-bending: roll diameter: mmweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,5 x 0,8 x 1,5 mmanual machineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Motorized Plate Bending Machines
date: 23.04.2024 add to watchlist
Machine: KRAMER hVe 65/1000
item-No.: 163267273
used

sheet width: 1050 mmplate thickness: 1.50 mmpre-bending: 1.25 mmdiameter of upper rolls: 65.0 mmdiameter of lower rolls: 65.0 mmside roll diameter: 65.0 mmspeed: ca. 6,0 m/minvoltage: 400 Vtotal power requirement: 0.8 kWweight of the machine ca.: 455 kgrange L-W-H: 1500 x 700 x 1230 mmFurnishing:- electro-mechanical three-roll round bending machine- robust electric drive STROMAG BZFM 63 drive motor- asymmetrical roller arrangement- manual delivery of the side roller- manual delivery of the bottom roller- swing-out top roller- freely movable double foot switch Right/left rotation of the rollers- side control cabinet Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9401269The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Motorized Plate Bending Machines
date: 26.02.2024 add to watchlist
Machine: LISSE ZA-30 Motorized Plate Bending Machines
item-No.: 162255271
used

Technical data of the used Lisse Z4-30 calender: Upper roller diameter: 230 mm Diameter of lower rollers: 170 mm Machine dimensions: 4800 x 1250 x 1300(h) mm

Category: sheet metal working / Motorized Plate Bending Machines
date: 29.02.2024 add to watchlist
Machine: LUNA 8266 CNC 10-40 Motorized Plate Bending Machines
item-No.: 163474357
New in: 1998
used

Offer 24031 Specifications: - Manual operation + CNC controlled operation - Max. working width 1040 mm - max. material thickness at 40 kg strength per mm² 4.00 mm - Upper roll diameter 100 mm - Rear roller diameter 100 mm - Upper roller can be swung out - Asymmetrical roller arrangement - Rear roller can be tilted for conical round - Lower roller + rear roller with wire groove - Upper + rear rolling mot. driven - Working speed 5.5 m/min - Swivel control panel with CNC control - E-foot switch - Drive 400 V / 1.10 kW - Space requirement approx. W 2000 x H 1250 x D 850 mm - Weight approx. 850 kg -Operating instructions

Category: sheet metal working / Motorized Plate Bending Machines
date: 23.04.2024 add to watchlist
Machine: MG AK 206 P
item-No.: 159867683
New in: 2007
used

sheet width: 2050 mmplate thickness: 6,0 mmpre-bending: 4,0 mmdiameter of upper rolls: 160 mmdiameter of lower rolls: 140 mmtotal power requirement: 2,2 kWweight of the machine ca.: 3.000 kgdimensions of the machine ca.: 3500 x 1500 x 1300 mm New price ~ 48.000 euros from a repair workshop - good condition (!)Furnishing:- hydraulic 4-roller bending machine- with conical bending device Inclination of the bottom roller and the side rollers Alignment in parallelism in each side roller position Hardened stop roller Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50%- pivoting operation- Digital displays (2 pieces) for the side roller position- Adjustable contact pressure of the bottom roller with manometer- hardened rollers SAE 1050 CK 45- Conical bending device- Hydraulic folding store for removing closed pipes- Direct drive of the upper and  ...

Category: sheet metal working / Motorized Plate Bending Machines
date: 09.04.2024 add to watchlist
Machine: OMCCA HSI 3000x4 Motorized Plate Bending Machines
item-No.: 161763622
New in: 1991
used

Offer 22336 Specifications: - max. working width 3030 mm - max. sheet thickness without bending 4 mm - max. sheet thickness with bending 3 mm - 3 driven rollers - Roll diameter top / bottom 205 / 185 mm - Working speed m/min - Drive – brake motor 400 V / 7.5 kW - Space requirement approx. W 5500 x D 1400 x H 1300 mm - Weight approx. 4.7 t - with - bend - Rear roller can be tilted, - Hinged bearing for swinging out the top roller - Extended roller ends for placing profile rollers - Right + counterclockwise rotation - Separate control panel

Category: sheet metal working / Motorized Plate Bending Machines
date: 23.04.2024 add to watchlist
Machine: OSTAS 2070 x 210
item-No.: 156797040
new

sheet width: 2000 mmplate thickness: 8 mmpre-bending: total power requirement: 7,5 kWweight of the machine ca.: 3,6 tdimensions of the machine ca.: 3600x1250x1350 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Motorized Plate Bending Machines
date: 27.03.2024 add to watchlist
Machine: OSTERBERGER WBM  10/3000-CNC Motorized Plate Bending Machines
item-No.: 154008239
New in: 2023
new

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive power  ...

Category: sheet metal working / Motorized Plate Bending Machines
date: 27.03.2024 add to watchlist
Machine: OSTERBERGER WBM 4/1500-CNC Motorized Plate Bending Machines
item-No.: 154008238
New in: 2023
new

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation - automatic CNC – controlled double-sided pre-bending - Conical bending device - three hydraulically driven rollers (one hydraulic motor per roller) - hydraulic linear under-roll adjustment - hard chrome-plated piston rods - hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics - Central lubrication system

Category: sheet metal working / Motorized Plate Bending Machines
date: 27.03.2024 add to watchlist
Machine: OSTERBERGER WBM 6/2000-CNC Motorized Plate Bending Machines
item-No.: 154008240
New in: 2023
new

Very high-quality CNC – controlled precision sheet metal round bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive  ...

Category: sheet metal working / Motorized Plate Bending Machines
date: 23.04.2024 add to watchlist
Machine: SCHAEFER SRMASY V-28
item-No.: 160161924
New in: 1973
used

sheet width: 2000 mmplate thickness: 8,00 mm max.plate thickness: 8,00 mm anbiegenroll diam. toproll: 240 mmroll diam. bottom roll: 240 mmside roll diameter: 240 mmwork height max.: ca. 1100 mmwork speed: 6,5 m/minvoltage: 400 Vtotal power requirement: 11,0 kWweight: 4910 kgrange L-W-H: 4000 x 1300 x 1600 mmFurnishing:- robust 3-roller bending machine with asymmetrical roller arrangement- free-moving operation- analogue position display for rollers (scale)- Fixed top roller- manual infeed of the bottom roller, using handwheels with scales- electrically adjustable side roller An inclined position is possible by pushing out a coupling Inclination for bending tapered tubes Adjustment takes place via a geared motor- driven upper and lower roller Side roller runs as a drag roller- original instruction manual + machine cardThe data for this ad was created with ModulMWS - the software solution  ...

Category: sheet metal working / Motorized Plate Bending Machines
date: 23.04.2024 add to watchlist
Machine: SCHAEFER SRMASY V-28
item-No.: 160113214
New in: 1973
used

sheet width: 2000 mmplate thickness: 8,0 mm max.plate thickness: 8,0 mm anbiegenroll diam. toproll: 240 mmroll diam. bottom roll: 240 mmside roll diameter: 240 mmwork height max.: ca. 1100 mmwork speed: 6,5 m/minvoltage: 400 Vtotal power requirement: 11,0 kWweight: 4910 kgrange L-W-H: 4000 x 1300 x 1600 mmFurnishing:- robust 3-roller bending machine with asymmetrical roller arrangement- free-moving operation- analogue position display for rollers (scale)- Fixed top roller- manual infeed of the bottom roller, using handwheels with scales- electrically adjustable side roller An inclined position is possible by pushing out a coupling Inclination for bending tapered tubes Adjustment takes place via a geared motor- driven upper and lower roller Side roller runs as a drag roller- original instruction manual + machine cardThe data for this ad was created with ModulMWS - the software solution of ...

Category: sheet metal working / Motorized Plate Bending Machines
date: 23.04.2024 add to watchlist
Machine: SCHÄFER SRMASY
item-No.: 163283473
New in: 1982
new

sheet width: 2000 mmplate thickness: 4,0 mmdistance between columns: 2050 mmroll diameter: 160 mmtotal power requirement: KWweight of the machine ca.: 2,75 tdimensions of the machine ca.: 3,6 x 1,2 x 1,3 mmSheet metal bending machine 3 rollersincl. foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Motorized Plate Bending Machines
date: 23.04.2024 add to watchlist
Machine: SGP R.b.h. / Groese 9
item-No.: 159568502
new

sheet width: 2000 mmplate thickness: 2,5 mmdistance between columns: 2050 mmdiameter of upper rolls: 95 mmtotal power requirement: 2,0 KWweight of the machine ca.: 900 Kgdimensions of the machine ca.: 3250 x 700 x 1100 mmSheet metal bending machine 3 rollersincl. foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: sheet metal working / Motorized Plate Bending Machines
date: 23.04.2024 add to watchlist
Machine: SMT - PULLMAX PV 7 EH
item-No.: 163837147
New in: 1980
used

sheet width: 2520 mmplate thickness: 15.0 mmpre-bending capacity: 12.0 mmupper roll diameter: Ø 295 mmlower roll diameter: Ø 295 mmbending speed: 5.2 m/minwork height max.: 1200 mmtotal power requirement: 15.0 kWweight of the machine ca.: 10900 kg.range L-W-H: 3250 x 2100 x 1700 mmFurnishing:- robust electro-hydraulic 3-roller round bending machine- electro-hydraulic folding storage for removing closed pipes- swiveling control unit, front right- Machine is designed for cone bending with parallel rollers max. bending strength at 2.500 mm .. 7.0 mm steel- electro-hydraulic delivery rollers- electro-hydraulic rotating/rolling movement- Digital position display of the rollers- hardened rollers SAE 1050 CK 45- Connection cable + plug- original instruction manual + plans Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9401271The data for this ad was creat ...