used Mixers for sale

Alexanderwerk GMD70 II lifting swaging machine used Stainless steel boiler and kneading arm Boiler with drain hole for cleaning water with protective grille made of stainless steel Machine was built by Diosna and is the size of an S35 two speeds, tidy and smooth running Timer switches off the machine after the set time has elapsed very good condition, should still be thoroughly cleaned before use Video about test run and further pictures available

Alexanderwerk GMD70 II lifting swaging machine used Stainless steel boiler and kneading arm Boiler with drain hole for cleaning water with protective grille made of stainless steel Machine was built by Diosna and is the size of an S35 two speeds, but rough running, should therefore possibly be subjected to a bearing change Timer switches off the machine after the set time has elapsed otherwise good condition, should still be thoroughly cleaned before use Video about test run available

Mixer M 260, volume 260 l, max. load 160 kg, connected load 400 V / 2.2 kW Mixer M 260, Volume 260 l, max.capacity 160 kg, electrical connection 4 V / 2,2 kW

Alimex Paddle Mixer M 400 Year of manufacture: 2021 / new machine Volume: 400 liters Max. filling: 300 kg Speed: 1 forward speed and 1 reverse speed each Power: 4.4 kW / 400 Volt Alimex Paddle Mixer M 400 Year of manufacture: 2021 / new machine Volume: 400 liters Max. Loading: 300 Kg Speed: 1 forward speed and 1 reverse speed each Power: 4.4 kW / 400 V

Type Barmix 300 New! complete stainless steel 2 speeds (20 and 40 revolutions per minute) 2 rotation directions 3.3 / 4.4 kw fold-up inspection stairs Safety lid Emptying forward via an emptying flap with CE marking Outer dimensions (L x W x H) : 1,750 x 950 x 1,650 mm (open lid: H: 2,100) Loading height ± 1,350 mm Dimensions Drum (L x W x H) : ± 860 x 670 x 565 mm

new ! all stainless steel closed lid with seal 2 mixing directions (manual or automatic) CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm Perfectly suitable for dry products, such as: spices, ingredients, powders, granulates, nuts, grains, seeds, kernels, dried fruit, Granola, ..

Tumbler IGLU 250 in good used and functional condition. Completely made of stainless steel, 250 litre drum, vacuum, rollable, analog control. Dimensions W/D/H 95/150/180 cm. Operating voltage 400 volts. Workshop-tested, ready for immediate use. More on request.

Meat mixer CFS Volume: 1000 liters Electrical power: 11kW Delivery time: 30 days after the advance payment

Product number: 1997WB Type: UniMix I 2000 Serial number: 1000 Year of construction: 2011 Capacity: 1600 L Power: 3 x 400V, 50Hz, 15kW Dimensions: 2700 x 1900 x 3100 mm Weight: 1900 kg CFS Multitrack meat analyzing system Type: S-1000 CFS Lifter for 200L eurobins Type: ColumnLoader 300S Serial number: 5000064751 Year of construction: 2006 Dimensions: 1500 x 1400 x 3800 mm Weight: 350 kg

Product number: 2414J Type: UNIMIX I V 3500 Serial number: 5000065442 Year of construction: 2007 Mixer: 3500 litre double paddle mixer Compressed air: 8 Bar Power: 3 x 400V, 50Hz, 41kW Dimensions: 3650 x 2100 x 4300 mm With (N²) nitrogen injection. Mixer on weighing cells

ROTARY VACUUM MASSAGER-DEFROSTER, ELDON Technical description: Power supply: 380-440V/50-60 Hz Dimensions: 1700 x 1250 mm

Fomaco FBM 1000 Brine mixer Condition: Excellent Designed as an additional and essential tool for Fomaco brine injectors to mix ingredients. With this brine mixer, the process of mixing ingredients is very smooth and quick with spectacular results at output. The mixer automatically fills the tank with water to the desired level, and the operator only has to add the dry ingredients into the hopper. Brine mixing capacity: 1000 liters Tank volume: 40 liters Voltage: 3 x 400 V \ 50 Hz Dimensions (LxWxH): 2215 x 1940 x 2235 mm.

loading : 75 to 80 % double jacket suitable for cooling or heating up to 75°C with mixing arm all stainless steel tiltable drum outside dimensions (l x w x h) : ± 2.400 x 1.100 x 2.000 mm 3kW PLC control yoc 2017

Product number: 2365 Type: VAS150 Serial number: 2342 Year of construction: 2000 Bowl: 150 litres Knifes: U-shape chopper Power: 3 x 400V, 50Hz, 15.8kW Dimensions: 1400 x 1650 x 2000 mm Tiltable bowl

This Glass VSM 150 mixer is designed to handle all types of products ranging from the most delicate (salads) to the most compact (dry sausages). Technical details: - Manufacturer: Glass. - Type: VSM 150. - Year: 2011. - Machine n°3335 - Power: 1,375 kW. - Weight: 270 kg. - Frequency: 50 Hz. - Amperage: 3.58 A.

Glass VSM150 Mixer Serial: 2941 150Kg glass mixer, tilting for discharge, stainless lid and sight hole. For marinating and massaging the meat and mixing of liquid, semi-solid and powdery products, with easytouch interval switch for 10 programmes with timer and rest settings, with ,manual, mobile, 3Ph

We sell here a tumbler / vacuum tumbler from the manufacturer Henneken, type C in a very good used and functional condition. Runs on 400 volts, approx. 2500 litres, completely stainless steel, analogue control, loading or emptying from two sides, workshop tested, immediately ready for use, dimensions W/D/H 190/250/200 cm, others on request.

ROTARY MASSAGER INJECT STAR, MODEL: HS-7 Technical description: Bowl size: 650 x 600 mm Power supply: 380-440V/50-60 Hz Dimensions: 850 x 800 x 1200 mm

VACUUM MASSAGER, INJECT STAR TYPE: MAGNUM 2600 Technical description: Serial number: 559 Capacity: 2600 l Power supply: 380-440V/50-60 Hz, 3ph Power: 7 Kw Drum size: 1300 x 2450 mm Dimensions: 3200 x 1500 x 1950 mm

Complete stainless steal Capacity: 1600 liters Basket dimensions: 190x105x80cm Dimensions of the machine: 340x100x180cm Delivery time: 30 days after advanced payment

Product number: 1936 Type: 750 Serial number: 13909 Year of construction: 2005 Mixer: double shaft paddle mixer Capacity: 2000 liter, up to 1000 kg Speeds: 15 / 30 RPM Infeed height: 2200 mm Outfeed height: 800 mm Vacuumpump: liquid ring SIHI LEMB 161 Water: 800 liter/hr Air pressure: 6 Bar Power: 3 x 400V, 50Hz, 13kW Dimensions: 2800 x 2300 x 2400 mm Weight: 2500 kg

Product number: 1775PG Type: 750 Serial number: 14350 Year of construction: 2009 Mixer: 1600 liter, double shaft paddle mixer Capacity: max 850 kg Mixing speed: 34 RPM at 50Hz Infeed height: 1960 mm Outfeed height: 740 mm Air pressure: 6 Bar, 17 nL Power: 3 x 400V, 50Hz, 16kW Dimensions: 3400 x 1900 x 2550 mm Weight: 1800 kg Karl Schnell platform Dimensions: 1400 x 640 mm Standing height: 1050 mm Nimo KG lifter Type: SK800MK2 Serial number: 11674 Year of construction: 2013 Max load: 800 kg Lifting height: 2600 mm Power: 3 x 400V, 50Hz, 3.55A Dimensions: 2000 x 2000 x 4550 mm

Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 10 KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 125 Delivery time: 5 working days after advanced payment

Meat mixer Laska Completely made of stainless steel Two paddle mixers Volume: 1500 liters Mixing capacity: 1200 kg

Stock # U2397-2 Used stainless steel horizontal twin ribbon mixer by Laska (AT) model ME3000. Machine has internal dimensions of mixing chamber W 1505 mm x L 2005 mm x D 1170 mm. Total volume of mixing chamber 3000 l. Working volume in range from 2100 l up to 2400 l, and weight of batch up to 2400 kg. Mixer has twin shafts with welded ribbons. Each shaft is driven by el. motor 11/7.5 kW, 2880/1450 rpm, 380 V, 50 hz, via reducer and chain. Working rotation of each shaft 36/71 rpm. Mixer has top open. Discharge through two front wall outlets, equipped with two lids designed in teflon and operated via hydraulical actuators. Mixer has hydraulical device driven by el. motor 1.5 kW, builded inside supporting pedestal. Mixer is mounted on four tension cells. Machine has connection pipe for feeding liquid inside the mixing chamber during the work. Mixer is equipped with stainless steel lifti ...

Product number: 2691 Type: ME500PNV1ABX Serial number: 11329 Year of construction: 2004 Mixer: 500 litres, double paddle mixer Capacity: max 400 kg Power: 3 x 400V, 50Hz, 11kW Dimensions: 1450 x 2750 x 2900 mm Weight: 1500 kg With tiltable mixing bowl, CO² cooling in the cover and BA24 lifter for 200L tote bins

Technical specifications Category used machines Subcategory mechanical processing of meat Type Mixer Height 2200 mm Width 1500 mm Length of 2600 mm Capacity 800 l Power supply: 400V 50 Hz 3N Full power of 18 kW The main material stainless steel, acid-proof The delivery time 2-3 weeks The type of the agitator Paddle Loading Tote bin Loader, free-standing The type of mixer Mixer open The number of twin-shaft Description Mixer company BABE provide quick and intensive mixing of the product. Presented machine has many uses and is ideally suited for mixing products of different consistency. Mixer has two paddle shafts provide homogeneous and the highest quality product. Is controlled using the control panel where we can monitor and adjust the device to our requirements. Specification: Brand: LASKA Model: ME 800 Type: rotary vane Mixer Size: 2200 x 1500 x 2600 (mm) ...

Meat mixer Laska Z 250 liters Mixing hopper: 250 liters Filling quantity max: 200kg Electrical power: 5.5kW Weight: 1380kg Delivery time: 30 days after advanced payment

Free-fall mixer Stainless steel drum Angle adjustments of the drum and emptying possible via lateral adjusting wheel Volume: approx. 140 litres Voltage: 230V Weight: approx. 96kg The machine comes from a mill in which it was used to mix flour. Accordingly, residues are still present and the machine must be thoroughly cleaned before use The lid does not close 100% tightly and the sprocket has already been repaired

VACUUM MASSAGER LUTETIA TYPE 1, WITH BUSCH PUMP TYPE:100-136 Technical description: Drum diameter: ?1000 mm Capacity: 500 liter Vacuum: 2 mbar Busch pump type: 100- 136 (Serial number:176722) Pump dimensions: 700 x 400 x 450 mm Machine dimensions: 2400 x 1300 x 1800 mm

LUTETIA VACUUM TUMBLER, TYPE: 4 Technical description: SERIAL NUMBER: 16004 Power supply: 400 V, 60 Hz CAPACITY: 1800 liter, WEIGHT: 1400 kg, WITH LUTETIA STEAM GENERATOR: type: 24 kW, serial number: 12773, year of construction: 2014, capacity: 23 liter, DIMENSIONS: 3800 mm x 2000 mm x 2050 mm. (Including Busch vacuum pump on mobile s/s frame, dimensions: 830 mm x 510 mm x 640 mm)

Machine details New Machines 4 Food Tumbler Mixer Model Uniball 225 Mixer Tumbler All stainless steel construction Capacity 225 litres, load capacity 60 kg to 100 Kg With inner blades to assist product roll Variable speed from 12 rpm to 24 rpm Motor gearbox drive 1.1 Kw Electric tipping discharge by motor gearbox Motor gearbox drive 0.12 kw Electric 400 volts 50 Hz Electrical controls mounted in IP 65 stainless steel control box Rigid construction to withstand movement Mounted on stainless steel wheels Discharge height to suit a standard 200 litre tote bin Overall length 1.6 metres Overall width 1.25 metres Overall height 2.0 metres Suitable for all type of products 12 months warranty

Mixer MBK Volume: 250L Dimensions: 1400 x 900 x 1300 mm Inside diameter: 800 mm Inner height dres: 500 mm Constructed of stainless steel One run Cover with the so-called plexiglass Stock status: 1 piece Condition: Used Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Type: MIX MAXI Mix volume: 450 liters Two mixing shafts with paddles Stepless speed regulation Programmable operation One outlet, mechanically operated Protective cover of hopper Lifting device for standard trolley 200 l Machine dimensions in сm: Width: 100,0 (190,00 with lifting device) Length: 180,0 Height: 220,0 Power: 5,5 kW Voltage: 380 V, 50Hz

Hooper capacity: 900 l Two working shafts with paddles Front discharge of ready product in 200 l trolley Pneumatic opening of covers Automatic stopping when cover is open Loading unit for 200l trolley Smooth regulation of speed Setting of working time Voltage / Frequency: 400 V /50 Hz /3 phasses Installed power: approx. 11,0 kW Control voltage: 24 V DC Machine dimensions in mm. (with column loader): Width: 2 129,0 Length: 2 189,0 Height: 2 745,0

ALL STAINLESS STEEL Hopper capacity : 300 l Two levels of hopper Two working shafts with paddles Front discharge of ready product in 200 l trolley Programming controller Power – 4 kW Machine dimensions in cm: Width: 95,0 Length: 154,0 Height: 156,0 Weight - 500 kg OPTION :Loading unit 200l trolleys: Column loader dimensions in cm: Width: 110,0 Length: 120,0 Height: 238,0 Column loader power 0,8 kW

All stainless steel Hopper capacity - 450 litres Two working shafts with paddles Loading unit for 200l trolley Vacuum pump BUSCH - 21 m3 Touch screen MITSUBISHI” Power – 6.2 kW Machine dimensions in mm without loader – 1900/1050/1730(2250) Weight - 950 kg Loading unit dimensions in mm - 1100/1200/2500 Loading unit Installed power - 0,8 Kw

Mixer 200 liters - NEW Hopper capacity: 200 l Two levels of hoper Two working shafts with paddles Power: 2.2 kW Dimensions L/W/H– 1400/750/1250 Weight: 300 kg

DOUBLE SHAFT PADDLE MIXER, NAWI (1200 LT) Technical description: Capacity: 1.200 lt Power supply: 380-440 V / 50-60Hz Bowl dimensions: 1160 x 1230 x 900 mm Dimensions: 2400 x 1650 x 2350 mm

NNP Stainless vacuum tumbler, 1500Kg capacity, forward / reverse, with timer, two stainless lids, 3Ph

DOUBLE SHAFT PADDLE MIXER, PALMIA (1000 LT) Technical description: Capacity: 1000 l Power supply: 380-440 V / 50-60Hz Dimensions: 2500 x 1400 x 1800 mm

We are selling here a paddle mixer from the manufacturer Risco, type RS 450 in a very good used and functional condition. The machine runs on 400 volts, completely stainless steel, capacity 450 litres, newly mounted, workshop tested, ready for immediate use, dimensions W/D/H 140/200/180 cm, others on request.

The versatile blender from RUHLE allows you to mix or marinate products in a short time, it is ideal for meat, poultry, fish, vegetables, fruits, nuts and other foods. The MKR 130 mixer has a capacity of 130 liters and is controlled by an external control panel based on LED technology. Ruhle has given its customers the ability to adjust the mixing speed to the needs of the product. The maximum speed is 50 rpm. Technical details: - Manufacturer: RUHLE. - Type: MKR 130. - Capacity: 130 L. - Weight: 320 kg. - Power: 3.2 kW. - Voltage: 400 V / 50 Hz. - Machine dimensions (L x W x H): 1200 × 900 × 1250 mm - Vacuum churn. -Stainless steel. - Manual failover. - Cooling system. - Variable speed from 0 to 25 rpm. - Churning arm and mixing arm. -Microprocessor.

The versatile mixer from RUHLE allows products to be blended or marinated in a short time. This universal blender with removable blender arm is ideal for meat, poultry, fish, vegetables, fruits, nuts, and other foods. It is equipped with a built-in vacuum pump. TECHNICAL: - Manufacturer: RUHLE - Type: MTR 130 - Year: 2003 - Capacity: 130L - Manually tiltable - Voltage: 400 V (3+N, 50 Hz) - Power: 1.1 kW - Amperage: 16 A - Weight: 200 kg - Manual failover - Machine dimensions in mm (D x W x H): 750 x 1000 x 1300 mm

Rühle Tumbler MGR 400, with vacuum, container size 400 liters, filling max. 300 liters, intelligent touch PC control, direct cooling by powerful cooling unit, infinitely variable arm drive allows up to 25 revolutions per minute, feeding for loading and unloading

Rühle Tumbler MKR 150, with vacuum, mixing- and scraping arm, container size 150 liters, adjustable Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 50 rounds per minute, all stainless steel, comfortable emptying of the goods by standard carriage size. You are very welcome to test the machine in our facility in Koblenz, Germany.

Rühle Tumbler MKR 600, Rühle high-tech polishing machine with vacuum, mixing arm, container size 600 liters, touch PC control, mixing and kneading, stepless arm drive allows up to 25 revolutions per minute, direct cooling by powerful cooling unit, Bayonet arm closure, integrated loading for 200 litres of standard trolley. The machine is available at short notice and can be tested in Koblenz, Rhineland-Palatinate.

Height 1950 Width 1670 mm Length 3200 mm Capacity 3000 l Voltage Electrical: 400V 50Hz 3N Main material Stainlees Steel Mixing System Spiral Product discharge Pneumatic dampers, front Mixer type Open Mixer Shafts amount Double Shaft

completely stainless steel Turn right-left double-walled (suitable for heating and cooling) Front emptying 2 motor: 2 x 3kW Safety cover Dimensions (L x W x H) : ± 1,500 x 1,200 x 1,700 mm + "Berief" Mobile feeding for 200L standard wagons

Producer: Servotech Description: Vacuum mixer Servotech - Capacity 340 l - Out put 240 kg/h -Total power 4,0 KW - Dimension; 1500mm x 800mm x 1300mm -Total weight 650 kg - Manual operation - one mixing and discharging gear - Top and discharging covers opened manualy - Machine fully made with s/s