found in category saws
Technical data: - Cutting range at 90° around 260 mm - flat 450 x 240 mm - Cutting range at 45° around 230 mm - flat 240 x 200 mm - Machine is mounted on original turnstile - Saw band dimension 3660 x 25 x 0.9 mm - Cutting speeds 20 / 35 / 50 / 70 m/min - Hydr. lifting + lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 0.8 kW - Coolant device - Space requirement approx. W 2100 x H 1200 x D 1000 mm - Weight approx. 500 kg
Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm 2 saw blade speeds: 40 / 80 rpm. Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug. free domicile within Germany
Specifications: - Manual band sawing machine - Saw blade dimensions 2925 x 27.0 x 0.9 mm - 2 cutting speeds N 36 / 72 m/min - Max. clamping range 355 mm - Mitre adjustable left + right up to 30 ° - Cutting range - 90° round 270 mm - Square 260 mm - Flat 350 x 240 mm - 45° li + right round 200 mm - Drive 400 V / 1.9 kW - Coolant device - Feed – roller table 2000 mm - Weight approx. 550 kg - Space requirement approx. W 1100 x H 2000 x D 1600 mm
SPECIFICATIONS: Semi-automatic iron sawing machine Oblique cut Installed power: 1.5 KW Complete with : -Vice - Millimeter scale - Visualizer - Workpiece clamps - Blade cleaner -Coolant pump - Inlet and outlet rollers mm: 2,000 + 3,000
Offer 24012 Specifications: - Saw blade dimensions approx. 2900 x 27 x 0.9 mm - Infinitely variable cutting speeds 18 - 105 m/min - Cutting pressure regulation - Mitre vise - Cutting area - at 90° approx. 250 mm - Square-flat 250 x 250 mm - at 45° approx. 170 mm - square-flat 170 x 170 mm - Drive 400 V / 1.3 kW - Micro spray coolant device -Mot. Chip Clearing Brush - Space requirement approx. W 1850 x H 1050 x D 850 mm - Weight approx. 450 kg
High Cutting Plates and Block Saw Manufacturer: Danobat: Sawing Range: Length: 500 mm, Width: 2100 mm, Height: 500 mm, Table Load: 10000 kg. Machine immediately available and available. Free truck loading.
WE OFFER AN VERY NICE DOALL HEAVY SAW - NC FULLY AUTOMATIC WITH COMPLETE CONWENYOR RAILS AND SPARES BLADES ON STOCK 13X NEW BLADES INCLUDED CUTTING CAPACITY: 100 -700mm 100W x 100H - 800W x 700H mm BLADE SIZE: 8250 x 67 X 1,6 mm SPEED: 16-85mm TENSION: BY HYDRAULIC COOLANT: 230L FEEDING LENNGHT : 400mm SINGLE TIME OR MULTIPLE TIMES DIMENSIONS OF MACHINE: 3910 W x 2330H x 2350L WEIGHT: 7000 KG FOR OUR CUSTOMERS WE ORGANIZE TRANSPORT WORLD WIDE MAKING EXPORT DOCUMENTS
Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 120 x 85 mm Mitre cutting area at 45° round: 85 x 85 mm Saw blade speed: 40/80 rpm Cutting speed: Drive motor: 380 V, 1.0/1.2 kW Space requirements: 850 x 520 x 1500 mm Weight: approx. 200 kg
Saw blade Ø: 275 mm Cutting range at 90° round: 90 mm Cutting area at 90° rectangle: 75 x 75 mm Mitre cutting area at 45° rectangle: 75 x 75 mm Saw blade speed: 40/80 rpm Drive motor: 380 V, 0.5/0.9 kW Space requirements: 700 x 600 x 1580 mm Weight: approx. 180 kg
Made in Germany Saw blade size: 300 mm Saw blade speeds: 40/80 rpm. Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.
Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.
Year of construction: 2016 Double Miter Saw Manufacturer: ELUMATEC, Type: DG 244-E580/5 E580 Control with automatically swivelling workpiece support, roller conveyor and accessories
Inv. Num. : 7509 Type: DG 79/31 M Producer: Elumatec Created: 2009 Parameters: Maximum sawing speed: 2800 1/min Cutting length: 520 mm Wheel diameter: 380 mm Motor power: 3 kW
Offer 24045 Technical data approx.: - Roll diameter 420 mm - Projection 405 mm - Max. passage height 280 mm - Table size 600 x 600 mm - Swivel table 15 / 45 ° - Table height from the floor 1050 mm - Saw blade length approx. 3400 mm - Saw band width approx. 3 - 20 mm - Cutting speeds infinitely variable 25 - 300 m/min - Drive 400 V / 1.9 kW - Weight approx. 480 kg - Space requirement approx. W 750 x H 2050 x D 1150 mm
Friggi Bandages Panel and Block Saw Model 104/FG 700 TS with sawing range, length 650 mm, width 1500 mm, height 450 mm, table load max. 4000 kg. Machine immediately available free truck loaded.
specifications: - Saw blade diameter up to approx. 450 mm - Cutting range at 90° approx. - 60 x 250 mm - 140 x 120 mm - 100 x 200 mm - in miter at 45° approx. - 60 x 190 mm - 140 x 80 mm - 100 x 160 mm - in miter at 15° approx. - 100 x 60 mm - Miter adjustment left + right - Pneum. Saw blade feed - Saw blade speed 2800 rpm - Drive 400 V / 2.2 kW - Compressed air connection 6 bar - Space requirement approx. W 900 x H 1200 x D 900 mm - Weight approx. 280 kg
Data: Saw blade 4500 x 13 mm Cutting height max. 200 mm Blank diameter from 200 - 1500 mm Cutting speed approx. 1Technical50 - 1500 m/min , infinitely variable Hydraulic material clamping Hydraulic swivel device Drive power saw motor 4.0 kW Rotary actuator hydraulic 1.5 kW
Saw blade diameter: 370 mm cutting capacity at 90°: 115 mm cutting capacity at 45°: 115 mm drive motor: 380 V, 4.5 kW space: 1000 x 1200/2200 x 1500 mm weight: approx. 900 kg
Manufacturer : Kasto Type : Verto A2 Year of construction : 2015 Control : Basic-Control Kasto Location : from the beginning of March 2024 from warehouse Sweden Easy-to-use Basic Control control Frequency-controlled, infinitely variable saw drive Infinitely variable, hydraulic saw feed Two hydraulic horizontal clamping vices Electromotive material feed via ball screw Specifications Cutting range 90° round. :260 mm Cutting range 90° flat (W x H): 320 x 260 mm Cutting range 90° square: 260 x 260 mm Shortest remnant length: 6 mm Smallest saw diameter: 10 mm Band saw dimensions: 3,180 x 27 x 0.9 mm Cutting speeds: 12-120 m/min Material support height: 950 mm Weight. 1,360 kg Dimensions. 2,365 x 2,250 x 1,767 mm (without roller conveyor) Automatic Band Saw with Reduced Volume Other equipment - Automatic zero positioning of the first saw section - Coolant ...
Specifications: Sawing area 90° round / flat / quad: 265 / 300 x 150 / 200 x 200 mm 75° left/right round / flat / quad.: 265 / 280 x 150 / 200 x 200 mm 60° left/right round / flat / quad.: 250 / 250 x 150 / 200 x 200 mm 45° left/right round / flat / quad: 200 / 200 x 100 / 180 x 180 mm 30° li round / flat / quad: 130 / 130 x 100 / 125 x 125 mm Cutting speed: 17 - 100 m/min Band saw dimensions: 3280 x 27 x 0.9 mm Working height: 950 mm Drive power: 2.0 kW Connection: 400 V Weight, approx.: 390 kg Dimensions, (LxWxH), approx.: 1580 x 930 x 1400 mm Equipment: - Can be swivelled left and right - Highly stable saw frame - Easy to use - Emergency stop push button -CE
- Cutting angle adjustment 0° - 45° - Robust touchscreen control panel - Automatic workpiece feed - Torsion-resistant double column construction - Hydraulic infeed of the saw bar via chrome-plated column guide - Slightly inclined saw handle for improved cutting performance and increased saw blade life - Double, hydraulic workpiece clamping - Infinitely variable adjustment of the cutting speed - Programmable, automatic angle positioning in 1° steps from 0° to 45° - High angular accuracy due to precise and stable saw blade guides - Automatic belt breakage control - Belt speed is infinitely variable and is shown on the display - Machine with signs of wear and damage to the paintwork - no functional impairment
Cutting range round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Cutting range round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting range approx. 60° right: 45 mm Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Band saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speeds: 30 - 80 m/min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Characteristics: - Two cutting speed levels for optimal adaptation to the workpiece - For miter cuts, the saw bracket can be swivelled up to 60° - Including workpiece stop for rational work - Optimum cutting results thanks to band saw blade guide with ball bearings - High-torque engine, even under continuous load - Under load, the motor electronics keep the cutting speed largely constant - Environmentally friendly, as there is no need for lubricating and coolant fluids - Smooth, low ...
Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m/min Motor output power S1 100%: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vibration-fre ...
Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height approx.: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds : 40 / 80 m/min Motor output power S1 100%: 0.75 kW Voltage : 400 V Machine dimensions : 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vi ...
Cutting width: 1010 mm Cutting height: 340 mm Working height: 1000 mm Table size: 600 x 500 mm Stepless cutting speed: 1st gear: 20-85 m/min 2nd gear: 120 - 500 m/min Band saw blade length: 4540 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 1.5 kW Weight, approx.: 800 kg Equipment: - Band saw blade - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light - LED speed indicator - Blow-out device -CE
Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Table size: 500 x 400 mm Stepless cutting speed: 20 - 90 m/min Band saw blade length: 2840 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 0.75 kW Weight, approx.: 250 kg Scope of delivery: - Band saw blade - Stepless cutting speed - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Parallel fence -CE
Cutting width: 520 mm Cutting height: 310 mm Working height: 1000 mm Cutting speed level 1: 25 - 85 m/min Cutting speed level 2: 120 - 500 m/min Cord edge: 3880 mm Saw band width: 3 - 16 mm Table size: 600 x 500 mm Table swivel range (in 4 directions): 15° Motor power: 1.5 kW Blade welding device: 2.4 kVA Machine dimensions (L x D x H): 1300 x 760 x 2140 mm Weight approx.: 500 kg Equipment: - Band saw blade - Stepless cutting speed - Reduction gearbox - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Angle stop - Parallel fence
Used Vertical band saw, make MÖSSNER, good, electrically connected Model SM 420 Masch.-No. 20313 Built in 1972 Technical data: 8 cutting speeds: 12 - 375 m/min Support table B x T approx. 600 x 600 mm Discharge approx. 410 mm Cutting height max. approx. 260 mm Space requirement , W x T x H approx. 1 x 0.8 x 1.95 m (height incl. 9 cm eye screw) Weight estimated approx. 0.6 to Facilities: both rollers are "newly rubberized" / re-occupied IDEAL Tape Welding Machine Table tilted
Specifications: Cutting width 1050 mm Table size 800 x 820 mm Automatic travel approx. 340 mm Cutting height under guide 400 mm Cutting height under the handwheel approx. 290 mm Belt length 5250 - 5380 mm Infinitely variable speeds - Gearbox stage 1 17 - 79 m/min - Gearbox stage 2 67 - 305 m/min - Gearbox level 3 207 - 940 m/min
Used Vertical band saw, make MÖSSNER, good, electrically connected Model SSF/500 Masch.-No. 11502 Built in 1963 Technical data: Cut: - 3 gear stages + Vario gearbox 15 - 940 m/min - Fast response 2350 m/min Support table B x T approx. 700 x 600 mm Discharge approx. 480 mm Cutting height max. approx. 360 mm Space requirement , W x T x H approx. 1.1 x 0.8 m Weight estimated approx. 1 to Facilities: Rubbering of both rollers is in good condition IDEAL Tape Welding Machine Table tilted
Specifications: Cutting width 500 mm Table size 800 x 820 mm Travel approx. 350 mm Cutting height under guide approx. 400 mm Belt length 4000 mm Infinitely variable speeds approx. Gearbox stage 1 15 – 80 m/min Gearbox Stage 2 75 - 305 m/min Gearbox Stage 3 207 - 944 m/min
Cutting speed:-3 gearbox stages + Variogetriebe 15-940 m / min -Overdrive 2350 m / min Plate B x T CA 700 x 600 mm RADIUS approx. 480 mm Cutting height Max approx. 360 mm Space requirements, B x T x H approx. 1.1 x 0.8 m estimated approx. weight 1 to Equipment:-rubber of the two rollers is in good condition -IDEAL band sealer - table Tiltable
Hardly used ( year of construction 2021) Metal Band Saw with Swivel Frame from Optimum OPTIsaw S 300DG Specifications Saw blade 2750 x 27 x 0.9 mm Saw blade speed 35 + 70m/min Cutting angle -60 – +45° Cutting range 0° round 255mm Square 190mm rectangle horizontal 190 x 310mm Cutting range -45° round 220 mm Square 190mm rectangle horizontal 135 x 190mm Cutting range -60° round 135mm square 135 mm rectangle horizontal 135 x 135mm Drive power 1.5 KW - 400 Volt Weight 335 kg Dimensions (LxWxH) 1680 x 1600 x 1300 mm Scope of delivery: material stop, bi-metal saw blade, machine base, coolant pump Properties Double mitre up to +45° and -60° Silent operation Heavy-duty cast design High cutting accuracy due to vibration-free operation Ball-bearing saw blade guide C ...
No. 4428: 1 gebr. Horizontal band saw Fabr. SAMUR, type S-1000 V, Bauj. 1966 Arb.-Ber.: 800 mm throughlet width, Accessories: Table Dimensions: 610 x 610 mm Table extension on the left with welding device Other: Cutting height 350 mm Cutting speed 20-800 mm Sheet length: 4,550 mm. Blade width: 4 to 15 mm. Speed infinitely variable Cutting speed: 23-711 m / min Electric motor 380 V
Max cutting length: 4000 mm Cutting height: 200 mm Cutting width: 130 mm Power: 5,1 kW Weight: 650 kg
Machine Type: Aluminum Saw Manufacturer: Tronzadoras Type: TL500A Year of construction: 2000 Condition: used Offer will only be sent if a complete imprint is provided! Price 1.750 Euro incl. 19% VAT Location Warstein , Germany Reference M-TRO-1123 DESCRIPTION We offer you a used aluminum saw from the manufacturer Tronzadoras. - Aut. Feed - Angle adjustment - Minimum quantity lubrication More pictures to follow Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!
Sword Saw Hand Saw Trumpf TPC 150-2 for Cutting Sandwich Panels Location of the machine: 76661 Philippsburg The machine can be viewed on site. It works perfectly. You can arrange a viewing appointment at any time. We'd love to hear from you.