bore capacity in steel (diameter): 50 mmarm length: 2000 mmworkpiece height max.: mmtotal power requirement: kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 5,8x4,5x3,4 mBrand: BatliboiType: BPR-50Boiler radial drilling machineCapacity: 50 mmThroat depth: 2.000 mmSpindle taper: MK5Stroke: 350 mmDrilling Spindle: 75 mm øHead in degrees adjustableSpeed min: 16 RPMSpeed max: 800 RPMClamping surface: 2.610 x 1.050 x 260 mmMachine dimensions (lxwxh): 5.740 x 4.450 x 3.397 mmMachine weight: 6.570 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Code 230302 Description of fast radials Brand DONAU Type DR – 13 G Machine r. 321 – 2 Year of construction 1966 Capacity in steel 60 13 mm Capacity in GG 16 mm Thread cutting capacity in steel M8 – M 10 Thread cutting capacity in cast iron M 10 – M 12 Spindle holder 2 MK Projection 820 mm Table 1000 x 700 mm Vertical movement of the boom 400 mm Spindle stroke 100 mm Spindle table min. – max. 180 – 580 mm Spindle speeds infinitely variable in 2 steps 200 – 1100 / 600 – 3400 rpm Power 0,37 / 0,44 kW – 380 Volt Dimensions Br. x D x H 1000 x 1300 x 1800 mm Weight 590 kgs Condition machine is in normal condition
Preliminary information: stock no. 4657: 1 used Rapid radial drilling machine Make DONAU, mod. DR 28 Z with drilling head adjustment 600 mm work range: table 1200 x 500 mm
Code 220406 Description of fast radial MK-4 Brand DONAU Type DR – 32 Machine r. 686 – 3 Year of construction ± 19.. Capacity in steel 60 32 mm Capacity in GG 45 mm Tapping in steel 60 M 26 Thread cutting in GG M 36 Spindle holder 4 MK Projection 900 mm Table 1200 x 600 mm Vertical movement of the boom 400 mm Spindle stroke 190 mm Spindle table min. – max. 80 – 650 mm 18 spindle speeds 31 – 1370 rpm Spindle feeds 0.1 – 0.15 – 0.2 – 0.3 mm/rev Power 1.5 / 2.2 kW – 380 volts Accessories tapping device Dimensions Br. x D x H 1200 x 1600 x 1910 mm Weight 1700 kgs Condition machine is in normal condition
Code 231027 Rewriting Controlled Fast Radials Make DONAU Type DR 40 Machine No. 1137 – 3 Built in 1988 Drilling into full stem 60 40 mm Drilling into full GG 22 50 mm Tapping capacity into the St. 60 M 33 Tapping capacity into the GG 22 M 45 Steep taper of the drilling spindle SK 40 Feed normal ( 5x ) 0.075 – 0.6 mm/rev Drilling spindle speeds 18 pcs. 35 – 1800 rpm Drilling spindle stroke 200 mm Drilling radius min/max 350 / 1300 mm Projection min/max 120 / 1007 mm Height adjustment of the drilling spindle head 450 mm Distance drilling spindle/table min/max 350 / 800 mm Table top 1225 x 750 mm Power 2 / 3 kW 380 Volt Weight 2000 kgs Dimensions LxWxH 2300 x 1225 x 2400 mm Accessories for tapping device Coolant system Condition machine is in good condition
CONTROLS NC controls WORKING RANGE - BORING drilling capacity full bore (steel): 40 mm throat (max): 800 mmSPINDLE / HEAD spindle revolutions (min): 335 /min spindle revolutions (max): 1800 /min number of gears: 2 tool fixture: MK 4 TECHNICAL SPECIFICATION table surface (left-right): 1000 mm table surface (front-back): 500 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2500 mm space requirements -front/back-: 1250 mm total height: 2500 mm- 9`600h operating hours- div. tool holders, - coolant system- with cube table
Specifications: - Drilling capacity into solid steel ST 60 40 mm - Drilling capacity GG 25 50 mm - Tapping ST 60 M 33 - Tapping GG 25 M 45 - Drilling spindle holder MK - Spindle diameter 55 mm - Quill stroke 200 mm - 18 drilling spindle speeds 35 - 1800 rpm - Drilling feeds 0.075 - 0.60 mm/rev - Height adjustment of the drilling column 450 mm - Drilling radius min / max 305 / 1005 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1900 x H 2800 x D 2300 mm - Weight approx. 1800 kg -with: -Auto. Selection of speeds + feeds - Tapping device - hydr. Columns + Boom Clamping - Coolant device - T – Vertical grooves on the left side of the machine
offer 23036 Specifications: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drilling spindle holder MK 4 - Quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drill feeds 0.1 - 0.3 mm - min./ max. distance spindle – table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Tapping device - hydr. Columns + boom clamp - Coolant device - T – Grooves Vertical on the rear side of the machine
Description: Rapid radials with - Advance - Thread cutting device - Tool holder with tools - Coolant system see pictures Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Workpiece height - max. 550 mm Table clamping surface 1530 x 750 mm Spindle holder MK 4 Projection 1000 mm Drill spindle stroke 170 mm Spindle speeds 38 - 2000 rpm Operating voltage 380 V Connected load 5.0 kW Machine weight approx. 2.0 t Space requirement approx. 2.0 x 1.6 x 2.1weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,600 x 2,100 mm
bore capacity in steel (diameter): 32 mmbore capacity in cast iron: 40 mmworkpiece height max.: 550 mmtable surface area: 1530 x 750 mmspindle taper MT: 4 throat: 1000 mmbore spindle stroke: 170 mmspindle turning speed range: 38 - 2000 U/minvoltage: 380 Vconnected load: 5,0 kWweight of the machine ca.: 2,0 tdimensions of the machine ca.: 2,0 x 1,6 x 2,1 mFast radials with- feed- 3 tables- Thread cutting device- Coolant system- Tool holder with toolssee picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine type: High speed radial drilling machine Manufacturer: HKS Model: HKS 34 MG Year of construction: 1986 Condition: very good Type of offer: used machine Specifications: Table: 1200 x 560 mm Side table: 550 x 340 mm Drilling diameter: 45 mm Drilling depth: 170 mm Speed range: 38 - 2000 rpm. Tool holder: MK4 Projection: 930 mm Drive: 1.5 / 3.0 kW Remark: automatic feed with el./magn. Tripping threading device, coolant device, vertical clamping plate 500 x 670 mm, Chuck Weight: 2000 kg The machine is in a very good and immediately ready condition and can be viewed and demonstrated with us. We would be pleased if you are interested in our offer. Subject to errors, changes and prior sale.
bore capacity in steel (diameter): 32 mmarm length: 410 - 1000 mmworkpiece height max.: 765 mmcoolant: ja boring spindle diameter: 38 mmdiameter of quill: 70 mmspindle stroke: 225 mmboring spindle: MK 4 mm/minspindle turning speed - stepless: 70 - 2000 U/minfeed range - spindle: 0,04 - 0,32 mm/Ucolumn diameter: 225 mmbore radius max./min: max. 1130 mmtable surface area: 630 x 1320 mmheight adjustment: 500 mmbase plate: 1500 x 1000 mmT-slots: 4 StückT-slot - distance: 18 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: mshift of supports: 590 mmwithout turntable and toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.