used Double-sided slot miller for sale

Longitudinal profiler for A.costa Fedra floorboard Model Fedra PF10 Working length min/max 350-1400mm Working width min/max 60-100mm Working height min/max 8-30mm Feed speed adjustable 7-44m/min The machine is available on request ! Net price

Das Zentren nicht benutzt (Die Pandemie Änderte die Pläne). Das Zentren wurde im Jahr 2020 nach Deutschland gebracht. Accuway Misteiner der besten Hersteller in Taiwan. der Maschinen in die ganze welt liefert Controller Fanuk 0i Spindle speed 10000 rpm Spindle nose taper BT40 Bearing inner diameter 70mm drive system Belt (Direct) X-axis travel 850mm Y-axis travel 550 mm Z -axis travel 150-700 mm Table dimension 1100x600 mm T-slot 5x18x100 Max. weight on table 1000 kg FEED RATES X-axis travel 30 m/min Y-axis travel 30 m/min Z -axis travel 30 m/min Cutting feed rate 12 m/min AUTOMATIC TOOL CHANGE SYSTEM tool magazine capacity 24 pcs Max tool weight  ...

Serial Number: 20916 Weight: 0,35 tons Power: 3.7 kW Air pressure: 6- 10 Bar Length mm: 3900 Width mm: 1300 Height mm: 1800 Working height: 1030mm Transport size L x W x H: 3,9 x 1,3 x 1,8 mtr. Min.-max glass size: 100x 100 -800x3400 in mm Condition machine : As good as new Control type: Automatic Electric. Connection: 230 Volt Missing parts: Hotmeld Documentation: Yes Instructions: Yes Electric diagram: Yes Photos/film available: Photos and video available

Machining center in continuous flow Usable width 1300 mm Working Dimensions X:4200 mm / Y: 1300mm / Z: 60 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1Saw Blade) Working Speeds X: 100m/min / Y: 100m/min - Z: 20m/min 5.5 Kw I 7.50 HP ISO 30 HSD Spindle Motor Panel Handling with Double Clamping System (Independent Servo Control) Double Sided Air Flotation Working Table AES WOP CAD/CAM Program Piece Verification System with Laser Weight (Approx.) 3.500 kg

Machining center with drilling group without milling unit Working Dimensions X:Unlimited / Y: 950mm / Z: 70 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1 Saw Blade) Working Speeds X: 70m/min / Y: 70m/min - Z: 20m/min Panel Handling with Single Clamping System Double Sided Air Flotation Working Table AES WOP CAD/CAM Program Piece Verification System with Laser Weight (Approx.) 1.450 kg

Continuous cnc with drilling unit and also electrospindle for milling work Working Dimensions X:Unlimited / Y: 950mm / Z: 70 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1 Saw Blade) Working Speeds X: 70m/min / Y: 70m/min - Z: 20m/min 5,5 Kw I 7.50 HP ER32 Manual HSD Spindle Motor Double Sided Air Flotation Working Table Piece Verification System with Laser Weight (Approx.) 1.500 kg

AFM Harnaś R 550 E CNC machining centre built by the Polish company AFM ANDRYCHÓW in 2006 is used for precision workpiece machining. The machine used in production facilities, is distinguished by its exceptionally stable construction and reliable high-speed spindle. The offer also includes equipment comprising, among others, a 16-position tool magazine and a convenient to use FANUC Series 0i-MC CNC controller. The Harnaś R-550 E CNC vertical machining centre weighs 3300 kg. Technical data of the AFM Harnaś R 550 E CNC milling machine - work table dimensions (L x W): 360 x 720 mm - feed rates in the X/Y/Z axis: 550/410/510 mm - maximum spindle rotational speed: 8000 rpm - minimum spindle rotational speed: 45 rpm - spindle taper: ISO BT 40 - spindle torque (at nominal rpm): 47.7 Nm - instantaneous spindle torque (at nominal rpm): 70 Nm - T-slot number: 3 - T-slot width: 14  ...

BRAND: AGIECHARMILLES YEAR: 2009 MODEL: MIKRON VCE 1400 PRO APPLICATION TYPE: MILLING LOCATION: POLAND MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 3420 MM MEASUREMENTS DEPTH: 3250 MM MEASUREMENTS HEIGHT: 2790 MM MACHINE WEIGHT: 8700 KG CONTROL UNIT BRAND: HEIDEINHAIN MODEL: ITNC 530 MAIN DRIVE SPINDLE SPEED RANGE: 100 - 10000 1/MIN SPINDLE MOTOR POWER: 12/18 KW TOOL TAPER: BT 40 NUMBER OF AXIS: 3 MOVEMENT X-AXIS MOVEMENT: 1400 MM X-AXIS RAPID TRAVERSE: 24 M/MIN Y-AXIS MOVEMENT: 650 MM Y-AXIS RAPID TRAVERSE: 24 M/MIN Z-AXIS MOVEMENT: 675 MM Z-AXIS RAPID TRAVERSE: 20 M/MIN TABLE OUTER LENGTH: 1400 MM OUTER WIDTH: 620 MM TOOLS SLOTS IN STORAGE: 24 MAX WEIGHT: 6 KG MAX TOOL LENGTH: 305 MM MEDIA MAIN ELECTRONIC CONNECTION: 3X400V / 50-60 HZ ADDITIONAL EQUIPMEN ...

Clamping plate, welding table, straightening plate, T-slot plate -3D welding and work table -in aluminum for stainless steel processing -for positioning and finish welding with T-slot system -Support area: 1000x1000 mm -2x pneumatic clamping cylinders with ground connection -Width: 1000 mm -Depth: 1400 mm -Height: 1300 mm

ANAYAK PERFORMER 2000 CNC milling machine built in 2007 in Spain, uses a torsion milling head with automatic positioning in the A+B planes for precision machining of larger workpieces, weighing up to 5000 kg. The machining process is carried out on an easily accessible work table of the milling machine, with dimensions (L x W) of 2200 x 850 mm, in X,Y,Z axes with feed rates of 2000 (X axis), 1000 (Y axis) and 1000 (Z axis). The CNC bed milling machine has a highly efficient spindle with two-stage speed adjustment from 60 to 3000 rpm, ensuring a significant reduction in milling time. The machine also features, among others, a control panel with HEIDENHAIN iTNC 530 CNC control, cooling through spindle and RENISHAW RMP60 workpiece probe. The CNC bed type milling machine weighs 14000 kg. Technical parameters of the ANAYAK PERFORMER 2000 machining centre - work table area (L x W): 2200 ...

BRAND: ANAYAK YEAR: 2001 MODEL: VH-PLUS-3000-N APPLICATION TYPE: MILLING LOCATION: SPAIN MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 25000 KG CONTROL UNIT BRAND: HEIDENHAIN MODEL: 426 MAIN DRIVE SPINDLE SPEED RANGE: 3000 1/MIN SPINDLE MOTOR POWER: 30 KW NUMBER OF AXIS: 3 MOVEMENT X-AXIS MOVEMENT: 3000 MM X-AXIS RAPID TRAVERSE: 20000 MM/MIN Y-AXIS MOVEMENT: 1270 MM Y-AXIS RAPID TRAVERSE: 20000 MM/MIN Z-AXIS MOVEMENT: 1070 MM Z-AXIS RAPID TRAVERSE: 10000 MM/MIN TABLE OUTER LENGTH: 3200 MM OUTER WIDTH: 1100 MM TABLE LOAD: 6000 KG TOOL TYPE OF TOOL HOLDER: ISO 50 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - DISTANCE BETWEEN SLOTS: 120 MM - WORKING FEED RATE: 5000 MM/MIN - UNIVERSAL HEAD MANUAL

BRAND: ARES-SEIKI YEAR: 2020 MODEL: R5030 PRODUCTION HOURS: 242 APPLICATION TYPE: MILLING LOCATION: SPAIN MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: FANUC GINDUMAC ID: ES-MIL-ARE-2020-00001 Technical Information GENERAL DATA MEASUREMENT WIDTH: 1500 MM MEASUREMENT DEPTH: 2230 MM MEASUREMENT HEIGHT: 2480 MM MACHINE WEIGHT: 2200 KG CONTROL UNIT BRAND: FANUC MODEL: SERIES OI-MF MAIN DRIVE SPINDLE SPEED RANGE: 0 - 12000 1/MIN NUMBER OF AXIS: 3 MOVEMENT X-AXIS RAPID TRAVERSE: 48 M/MIN Y-AXIS RAPID TRAVERSE: 48 M/MIN Z-AXIS RAPID TRAVERSE: 60 M/MIN TABLE OUTER LENGTH: 550 MM OUTER WIDTH: 320 MM TABLE LOAD: 200 KG Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - NUMBER OF T-SLOTS X WIDTH X DISTANCE BETWEEN SLOTS: 3X14X100 MM - LONGITUDINAL COURSE OF THE TABLE: 500 MM - TRANSVER ...

Manufacturer ARPAC Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: PART ARPACK ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print an ...

ARPAC M16632 Manufacturer: ARPAC USA Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. F ...

Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print and Apply Bar Co ...

vert. Internal broaching machine maximum tractive force: 10T Max stroke: 1000 mm Max cutting speed: 10.9 m / min Max reverse speed: 27.5 m / min Clamping surface: 400 x 400 mm Room set: 3 piece

YOM 1987. Worked not more than 10 years, one shift Grinding length 3000 mm Grinding width 1700 mm Workpiece height 1600 mm Distance between columns 1860 mm Grinding heads- 2 Table surface 3230x1600 mm Number of slots of the table 10 pcs Permissible table load with evenly distributed load 5000kg/m Weight of work-piece 15t Table travel speed 1-40m/min

Plate length: 5500 mmPlate width: 2700 mmPlate thickness: 450 mmNumber of T-slots: 9  Size T-slots: 48 mmType of material: Cast Iron   SPECIFICATIONS Length   5500 mm Width   2700 mm Height   450 mm T -slot size   T 48 No. Of T-slots  9 x Distance from T to T-slot / Jump  300 mm Weight a plate approx.14 Ton Number off matching pieces 3  

Plate length: 635 mmPlate width: 500 mmPlate thickness: 28 mmNumber of T-slots: 4  Size T-slots: 28 mmType of material: iron   Number of T slots:       4 Jump from T to T:        160mm T size:                  28mm Number of matching pieces:2 Length:                  635mm Width:                   500mm Height:                  690mm Weight:                  280kg

Plate length: 3000 mmPlate width: 1500 mmPlate thickness: 400 mmNumber of T-slots: 5  Size T-slots: 32 mmType of material: Cast Iron   MAKE   Asquith UK TYPE    CAST IRON YEAR    80 er SPECIFICATIONS Length    3000 mm Width      1500 mm Height     400 mm T -slot size   T 32  No. Of T-slots   5 x Distance from T to T-slot / Jump   305 mm Weight a plate approx.4000 Ton Number off matching pieces   2 DIMENSIONS Length   3000 mm Width    1500 mm Height    400 mm

length: 1870 mmwidth: 600 mm- consisting of 2 pieces (1x 1000 x 600 mm + 1 x 870 x 600 mm)Accessories: various fixed and flexible pole extensions- with square pole pitch, pole size 50 x 50 mm,- solid steel surface- adhesive force >= 350 kg per pole- depth of the magnetic field at max. holding force level up to 12 mm- with control unit ASSFALG, 93101.03The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous; "ready for operation"

Autobond Mini 105 TPHES - thermal laminator year 2008 2 sided Max. sheet size: 106 x 106 cm (41.73" x 41.73") min. sheet size: 28.5 cm x 32 cm (11.5" x 12.5") Max. speed: 60 m/min (200 ft/min) 115 gsm to 650 gsm Heidelberg Speedmaster feed head Good Condition

Aventics R480163988, stroke 200 mm, piston diameter Ø32 mm, slotted cylinder Item Condition: New Damping pneumatic Compressed air connection G 1/8Hub 200 mm Piston diameter 32 mm Ambient temperature max. 60 °C Ambient temperature min. -10 °C Principle of action double acting Operating pressure max. 8 bar Operating pressure min. 3 bar

BRAND: AXA YEAR: 2008 MODEL: DBZ PRODUCTION HOURS: 58513 APPLICATION TYPE: MILLING LOCATION: CZECH REPUBLIC MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: 01 02 2024 Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2250 MM MEASUREMENTS DEPTH: 4460 MM MEASUREMENTS HEIGHT: 3550 MM MACHINE WEIGHT: 12000 KG CONTROL UNIT BRAND: HEIDENHAIN MODEL: ITNC530 MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 6000 1/MIN NUMBER OF AXIS: 4 MOVEMENT X-AXIS MOVEMENT: 2 X 750 MM Y-AXIS MOVEMENT: 500 MM Z-AXIS MOVEMENT: 600 MM TABLE OUTER LENGTH: 1000 MM OUTER WIDTH: 500 MM TOOLS SLOTS IN STORAGE: 22 MAX WEIGHT: 8 KG MAX TOOL DIAMETER: 85/180 MM MAX TOOL LENGTH: 400 MM MEDIA POWER CONSUMPTION: 69 KVA Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - DISTANCE TABLE - SPINDLE NOSE 180 - 780 MM - RAPID FEEDRATE ...

Roll length: 1100 mm Video is example to showcase how the machine works. The LW120 roller coater is an easy-to-clean compact machine and is often used as a Glue applicator orr Oil application machinefor one or two-sided application. The LW120 is used for roller application of liquid media such as glues, oils, glazes, primers, synthetic resins and adhesivesnbsp;on flat substrates such as wood, cardboard, PS and XPS rigid foam boards, metal parts, brake linings, cork floors, insulation boards,nbsp;. . . As an easy-to-clean compact machine that can be quickly dismantled, the LW120 roller coater is a convincing, universally applicable unit for coating a wide variety of application media. It impresses above all with its simple handling, durable and robust construction, as well as its efficient application of liquid and paste-like coating media. The LW120 roller coater from Axel Wirth Maschi ...

AUTOMATIC SLOT MORTISER type BACCI MOD second hand machine machine with cast iron structure machine according to CE regulations: YES electronic oscillation speed spindles with inverter max. slots width mm. 120 + thickness max. slots thickness mm. 20 max slots depth mm.80 coller shank mm.16 table inclination 20° spindle motor power: Hp 3 oscillating motor power: Hp 1 spindle rotation rpm 9500 net weigth kgs. 700 volt. 380/50

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF - volt. 380/50 - sn 772 - year 2003

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E – CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF2 - nc ISAC - perimetral net - volt. 380/50 - year 1996

SECOND-HAND CNC DOUBLE SIDED ROUND END TENONER BACCI TSD-E-NC14 - Working length mm. 1200 - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - Touch screen NC control - With CSF loader - Safety net - S/N 800 - CE rules (year 2004)

AUTOMATIC TWIN TABLE SLOT MORTISER Type BALESTRINI 2/CAP RECONDITION MACHINE Max oscillating length mm. 120 Max. mortise depth mm. 80 Spindle collect diameter mm.13 Max. bit diameter mm. 20 Spindle motor power: Hp 3 Oscillating motor power: Hp 1 Spindle rotation: rpm 9000 Volt. 380/50

with an automatic working cycle, Max working width / stroke length of the oscillation 120 mm, depth of 80 mm, table tilt maximum 20 °, tool clamping diameter of 13 mm, drill diameter of 20 mm, spindle motor power 2.24 KW / Volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating engine power 0.75 KW, oscillation adjustable from 120-240 strokes per minute, pneumatic workpiece clamping, 4 dust nozzle D = 80 mm, deep space - 1,000 mm, width 1300 mm, height 1250 mm, weight 500 KG

double-sided long-hole drilling machine with automatic duty cycle, maximum working width / stroke length of oscillation 120 mm, drilling depth max. 80 mm, table inclination max. 20°, tool clamping diameter max. 13 mm, drilling diameter max. 20 mm, spindle motor power 2.24 KW / volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating motor power 0.75 KW, oscillation adjustable from 120 - 240 strokes per minute, pneumatic workpiece clamping, 4 suction nozzles D=80 mm, space requirement - depth 1,000 mm, width 1,300 mm, height 1250 mm, weight 500 KG; Technically and optically in very good condition

DOUBLE AUTOMATIC TEMPLATE SHAPER MACHINE Type BALESTRINI C70 Max. working width mm. 360 Max. working heigth mm. 120 Feed : from 1 to 8 mt./min. ( automatic or pedal variation ) n.02 Router Shaft diam. mm.30 n.02 Router Shaft motor power Hp 5,5 each one n.01 Hydraulic advance variable spped motor power Hp 1 net weight : kgs. 1000

Double-sided double-spindle drilling and grooving machine Balestrini Pragma Top Characteristic Overall dimensions, mm - 1600х1600х1300 Power, kW - 4,5 Machine weight, kg - 1500 Drill diameter, mm - 16 Table height, mm - 950 Distance from the table to the spindle, mm - 100 Clamp - pneumatic

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

SECOND-HAND DOUBLE SIDED ROUND END TENONER BALESTRINI MOD. PRO 15 CNC - CE RULES - Working length mm. 170 – 2000 mm - Max tenon length 80 mm - Production: 1800 tenons/hour (900-1350 pieces/hour) - Tool rotation 11,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - With loader RBF 2 -Volt. 380/50 - S/N AO.118.88 - Year 2002

Double sided round end tenoner Balestrini mod. TTSA Description:  Double sided round end tenoner Balestrini mod. TTSA complete with loader 1. Automatic loader 2. Control panel 3. min / max working length 240/1200 mm 4. maximum tenon size 100x30 mm 5. Capacity: 1200 tenons/hour (600 pieces/hour) 6. Tool rotation 9,000 rpm 7. Total power 6,5 kW

Balestrini linear milling machine two milling units pneumatic pressure of elements

BALLISTRINE- C 70 N- auto feed thru (2) sided shaper(2) 10HP; 3PH spindle motors • (2) 30mm diameter spindles with 5in. under the nut • Spring loaded floating spindles • In-feed and out-feed rubber covered upper feed rollers • Working width 14.4in. (360mm) max • Working height 4.8in. (120mm) max • Min working length 9.6in. (240mm) • Spindle 8,000 RPM • feed 3 to28..Price-$8,900

BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800

Cantilever racking, heavy duty racking -without insert trays: none available -Double sided -consisting of: -Shelf: each with 3 uprights, 5.4 m high -Double-sided support arms: 500 mm long -Bolt load capacity: 795 kg -Payload per side: max. 7000 kg -screwed -Number: 3x shelves available -Price per piece -Own weight: 1250 kg / piece

BRAND: BENZINGER YEAR: 2014 MODEL: 5@LIGHT APPLICATION TYPE: MILLING LOCATION: GERMANY MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FANUC MODEL: SERIES 310I MAIN DRIVE SPINDLE SPEED RANGE: 36000 1/MIN NUMBER OF AXIS: 5 MOVEMENT X-AXIS MOVEMENT: 200 MM Y-AXIS MOVEMENT: 110 MM Z-AXIS MOVEMENT: 200 MM A-AXIS MOVEMENT: 360º MM B-AXIS MOVEMENT: 180º MM C-AXIS MOVEMENT: 360º MM TOOLS SLOTS IN STORAGE: 24 TYPE OF TOOL HOLDER: HSK 32

SECOND-HAND DOUBLE SIDED CUTTING SAW BORING BERLE MOD. TB2000 -Volt. 380/50 - S/N 2401011 - CE rules

BERNARDO BSG 4080 TDC surface grinding machine was built in Austria in 2018. Designed for fully professional production applications, the machine machines workpieces placed on a magnetic plate or directly on the work table with the utmost precision and accuracy. The hydraulically driven work table with a large magnetic platen moves on hardened and ground guideways, which have been additionally coated with a special Turcite-B coating to increase abrasion resistance. The hydraulic drive, in the form of a separate hydraulic unit with heat exchanger, prevents vibration and overheating, and also ensures safe table feed even under heavy loads. Radial and axial forces are evenly distributed on special bearings without play in the grinding wheel spindle. The BERNARDO magnetic grinding machine weighs 3400 kg. Technical specifications of the magnetic surface grinding machine BERNARDO BSG 4080 T ...

BRAND: BIESSE YEAR: 2008 MODEL: EXCEL NBC 712 X1-S APPLICATION TYPE: WOOD WORKING LOCATION: SLOVAKIA MACHINE TYPE: WOOD AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: BIESSE MAIN DRIVE SPINDLE SPEED RANGE: 1 1/MIN MOVEMENT X-AXIS MOVEMENT: 3730 MM Y-AXIS MOVEMENT: 2200 MM TOOLS SLOTS IN STORAGE: 8 TYPE OF TOOL HOLDER: HSK63 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - 16+8+4 DRILLING HEADS + GROOVING SAW - MAIN SPINDLE POWER 12KW - SECONDARY SPINDLE - 3X PUMP BUSCH 300/360M3/HR. - INFEED LOADER WITH STACKER MAGAZINE - LIQUID COOLING QUALITATIVE MACHINE BENEFITS: - LOW HOURS

SECOND-HAND CNC WORKING CENTER 4 AXIS BIESSE MOD. ROVER 24 S 6.5 - Working dimensions: X = 3000mm ; Y = 1350mm ; Z = 155mm - Tool changer 9 slots - ISO 30 - Drilling head 16 spindles - Saw blade group - Axe C - Vacuum pump Becker 100 mc/h - N. 6 working consoles - 7.5 bars - CE (year 2001)

BRAND: BIESSE YEAR: 2012 MODEL: ROVER C6.40 APPLICATION TYPE: WOOD WORKING LOCATION: SLOVAKIA MACHINE TYPE: WOOD AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 6100 KG CONTROL UNIT BRAND: BIESSE WORKS MAIN DRIVE NUMBER OF SPINDLES: 1 NUMBER OF AXIS: 5 MOVEMENT X-AXIS MOVEMENT: 3400 MM Y-AXIS MOVEMENT: 1580 MM TOOLS SLOTS IN STORAGE: 22 TYPE OF TOOL HOLDER: HSK63 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAIN SPINDLE POWER 15 KW - CHAIN MAGAZINE 22 POSITIONS - 5+2+2 DRILLING HEADS

CNC controller: FANUC Series 18i-T Capacity X-axis travel mm: 210+5 Y-axis travel mm: 120 (+60 -60) Z-axis travel mm: 500+10 C-axis : CS (Direct)(min 0,001º) Turning length mm: 500 Max. turning diameter mm: ø 250 Upper turret X-axis travel mm: 210+5 Z-axis travel mm: 500+10 Tool holder: Number of tool slots St .: 12 Indexing time s: 0,4 Main spindle Speed ​​spindle rpm: 30-3.500 Drive power spindle kW: 22-26(50%) Tailstock Tailstock travel mm: 100 Holder: MT4 Coolant system Tank capacity liter: 200 Equipment Chip conveyor Signal lamp various rigid tools Basic machine dimensions / weight Length mm: 4.000 Width mm: 1.965 Height mm: 2.100 Weight kg: 5.000

2 Side Rotary creasing and slotting Machine, series 69175/60, Max: 1300mm, Min: 135x80mm, 100m./minute