similar results found in category thermoforming machines
LEYBOLD pump level data to the pump status: RUTA - RUTA 1001 (20900895586) Pumpenystem (= 02209 Backing pump: LEYBOLD Sogevac SV300 Cat: 10931 Booster pump: Leybold Ruvac WAU1001 Cat: 11741 Condition: to see in Picture 3-6. The pump stand is completely clean newly painted and serviced in accordance with the manufacturer's specifications and tested and is 100% right, no oil leak Warranty: 3 months There are 2 x SV300 + WSU1001H available! There are 10 x SV300 + WAU1001 verguebar! Price refers to 1 PCs.; ready for operation
Vacuum drying oven Manufacturer A. Meier Ebfgo2r Small drying plant Built: 1988 B/h: abgel. 6700 hrs Control panel Siemens Chorus OP5 Kammerabm. approx. 760 x 900 x 400mm 400 V connection Device fully functional. The device was used after cleaning electronic circuit boards. Device is released due to operational resolution.
Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...
Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...
Palletizing robot for cartons Manufacturer: ABB Type: IRB 6640-130/3.2 / IRB 6640 M2004 Reach radius: 3.2m Handling Weight: 130kg Year of construction: 2010 Incl. tool for palletizing cartons by means of vacuum. Without vacuum generator. Palletizing robot for cartons Manufacturer: ABB Type: IRB 6640-130/3.2 / IRB 6640 M2004 Reach Radius: 3.2m Handling weight: 130kg Year of manufacture: 2010 Incl. tool for palletizing cartons by means of vacuum. Without vacuum generator.
Natural casing device without clips without knots Natural casing sealing system out clips
2-stage oil-lubricated rotary vane vacuum pump, for corrosives, checked and in perfect condition. Prepared for PFPE without oil load.
Turbomolecular pump ATH1600M part nimber 112745 of magnetic lecvtation. Few hours of operation.
63mm x 2mm AEF / Thermatool ERW Tube Mill Make: AEF (American Electric Fusion) Tube Diameter: 15mm – 63.5mm Material Thickness: 0.5mm – 2mm Tube Length: 6 meters Double Mandrel Uncoiler Entry Shear & End Welder TIG Power Supply Vertical Accumulator Make: Kent Driven Entry and Exit Pinch Rolls Strip Guiding Unit Forming Mill Individual Gear Boxes Universal 50HP DC Motor Six (6) Forming Stand Five (5) Side Stands Welding Section Make: Thermatool Type: Vacuum ERW Design Power: 200Kw Mechanical Welding Head Beat Removing Head with Winder Cooling Tank & Pump
Technical data: Plate lifting device Load capacity: 150 kg Format: 2300 x 1000 mm Suction plates: 6 x ø1100 mm Dimensions: 2300 x 1100 mm
Our Aerzen GL7500 roller piston vacuum pump is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty After refurbishing, our Aerzen GL7500 Roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
new Aerzen vacuum pump GM 2000 CM - Y 11 KW for frequency inverter operation Built in 2010 New, original packed 2800 m3 / h Price is unit price net, plus 19% VAT 6 pieces available
Plotter - cutter-creaser, digital cutter Make AG Model Kasemake KM600 Year 2000 ? Bed size 158 x 222 cm vacuum bed Capcity up to 15 mm thickness Functions can cut and crease many types of materials including board and plastics, ideal machine for small runs of box making, figures, etc, in any direction Details inclduing the computer + software and license
Agilent 1100 HPLC system, serviced, ready for use incl. control PC = Ready-to-use all-in-one Agilent HPLC system (1100 series), including configured control PC, tubing, and connectors. Condition: Very good, used, currently maintained and checked by a specialist company. Warranty: 3 months (if delivered by a specialist company) The modules: Agilent (HP) On-Line Vacuum Degasser - Model No. G1322A (Made in Japan) Agilent (HP) Quaternary Pump - Model No. G1311A (Made in Germany) Agilent (HP) Autosampler - Model No. G1313A (Made in Germany) Agilent (HP) Column Thermostat - Model No. G1316A (Made in Germany) Agilent (HP) DAD Detector - Model No. G1315A (Made in Germany) Agilent (HP) Solvent Tray Configured control PC with monitor, keyboard and mouse Software: Chemstation We will be happy to answer any questions you may have about the offer and provide you with further ...
In original box. Never used Pfeiffer Adixen Alcatel ATH 1600 M Turbomolecular Vacuum Pump - 5-axis magnetically levitated turbopump with drag stage for a pump speed of up to 1,400 l/s for N2.
Screw Vacuum Pump - Unused Manufacturer: Alcatel / Adixen Type: A 300 P Motor: 380-460V Status: Used; As Performance: 12 months Suction power: 320 m3/h connection: ISO-K 63 final pressure: approx. 1.2x10-2 mbar (abs.) Including: user manual ; ready for use
2-stage oil-lubricated rotary vane vacuum pump, checked and in perfect condition.
Bowl cutter Alexanderwerk is equipped with a head with 6 knives, which easily cuts the product and has a noise absorbing cover made of transparent special plastic. The cutter is suitable for every food industry plant where cutting and emulsion of the product is required. Manufacturer: Alexanderwerk Model: 100l Height: 1500 mm Width: 1700 mm Length: 1500 mm Weight: 500 kg Capacity: 100 l Electric power supply: 400V 50Hz 3N
Cutter Alexanderwerk Dimensions: 160x140x110cm Electric power: 18kW Volume: 65 liters
Vacuum cutter Alexanderwerk Body made of stainless steel Volume: 65 liters Dimensions: 130x120x130cm Electrical power: 15/20kW
Alexanderwerk cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 120 depth: 100 height: 130 Main motor power: 15 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment
Aleanderwerk KN 20 Zwilling Combination machine consisting of bowl cutter and meat grinder Bowl cutter with 20 l bowl volume Knife head with 3 pcs. included Two cutting speeds: 1. 1500 RPM. - 2. 3000 RPM. Stainless steel bowl Including thermometer for temperature indication Meat grinder 82 mm diameter Two grinding speeds Including brand new cutting set Machine sits on a movable frame with 4 rolls
Continuous vacuum filler for straight filling and portioning Integrated vacuum pump Program memory for 99 filling programs Electric power: 4 KW Machine dimensions in cm: Width: 60 Length: 110 Height: 160
STOCK NUMBER U2064 Description: Used line for compacting powders by ALEXANDERWERK (Germany). Line consist of: - feeding system - includes: 50 l powder container, rotary valves, vacuum pump, piping and bag filter. - horizontal, twin screw, feeder with adjustable working speed in range 0-77 rpm. - granulating system - includes - preparation granulator and two precise granulators, type RFG 150N. All granulators works with adjustable speed in range 0-112 rpm. - intermediate tank with screw type agitator, working with adjustable speed in range 0-20 rpm. - roll compactor ALEXANDERWERK model WP170/120V, designed in stainless steel. Machine has two rolls, each with width 120 mm x diameter 170 mm, mounted vertically. Rolls are working with adjustable speed in range 0-20 rpm. Driven by gearbox and electric motor 7.5 kW. Rolls are pressured via hydraulic device. Maximal pressing power up ...
BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Mail : infoeveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720
Alfa-Laval Deaerator/Evaporater DC-750-E In excellent condition Dearator with external condensor and liquid ring vacuum pump. No level control on it. Condensor data. SS single pass tubular heatexchanger. 43 tubes, 14x1mm, length 1980mm. Total cooling area of condensor 3.24m2. P&ID available
Quick Frame Alpha 4 (Italy) Product name: Quick Frame Model: Alpha 4 Manufacturer: Alfamacchine (Italy) Sales: Bohle AG Serial no.: 46096 Year of construction: 2003 Condition: Used and tested technical details: for making picture frames Weight: 36 kg with foot switch for hardwood (oak), medium hard wood (ramin), softwood (pine, pine) necessary working pressure: 4 - 7 bar Pressure gauges Manual adjustment for working pressure incl. compressor (SIL. AIR, Italy) Operating instructions Spare parts list incl. bracket assortment (photo) Compressor data (SIL. AIR 30-9) Tank capacity: 9 L Flow rate: 50 L/min Pressure: 8 bar (adjustable) Year of construction: 06/1991 Voltage: 230 V Current: 2.4 A Power: 340 W incl. connection hose Device dimensions (L x W x H): 560 x 300 x 400 mm Our price: Quick frame: 890,00 € (EUR) FP plus VAT ex Grunow (Brande ...
Filler ALFATEK – 20 valves • Year: 1995. • Speed: 3.500 bph. • Direction: Clockwise. • Filler 20 valves – low vacuum. • Safety protections.
Vacuum cutter VK 125 STL bowl 125 l, knife speed from 300 to 4200 rpm., Ejector hydraulic, without feeding, 6 cutter head, Busch vacuum pump, connected load approx. 40.0 kW Vakuum bowl cutter VK 125 STL,, Bowl volume 125 l, knife speed from 300 till 4200 rpm., unloader, without loading system, knife head with 6 knives, Busch vacuum pump, Power approx. 40.0 kW
SPECIFICATION: Max. working width 175cm, working area length 140cm max cutting height 50mm after compression VACUUM WITH OPTIONS: • CVA infinitely variable vacuum force adjustment • CCB system for covering cut elements • Drill 1 (drill bit) standard for markings (1.5 to 6mm) Multi-layer operation: • Fast and precise cutting of multiple layers of material (height 50 mm after compression). • Precise cutting without the use of safety buffers allows for more efficient use of raw material with shortened system lengths. • Innovative solutions to prevent vibration emission when working at high knife oscillation speed (up to 6000 cycles per minute). Single-layer operation: • Fast cutting of a single layer of material and low volumes. • Raw material taken directly from a feeder prepared to handle several rolls of material. • High cutting quality compared to c ...
Part no: 29510910, 35PSI, DUBLEX FILTER. BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720
Type: SPF10R56G8.3-W20, Nr: Q.5007779 , 6 bar, 0,57kw, 12mm²/s, 33.27 l/min BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720
Producer: Alpina Description: -Hopper capacity: 60l -Paddle rotor (teflon paddles) -Twister -Efficiency approx 300kg/h
Overview The filler + capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to process explosive products. The machine can be purchased with warranty. Technical data Fully automatic rotary filler Filling system: mass flow meter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Max. container dimensions: Height: 50-300 mm, Ø: 20-100 mm Pressurized feed tank for constant flow through flow meter Below level filling to avoid foam formation during filling Adjustable bottle neck centering Electr. level measurement CIP capable Designed for riser pipe processing Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting an ...
Overview The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Tech Specs: Filling points: 2 Filling valve diameter: 13 mm Suitable for filling highly viscous media Fields of application: food, beverage, pharmaceutical and chemical industry
AMADA EM 2510 NT Turret punching (year 2012) AC servo Direct twin drive Punching hours: 14271 h Machine on hours: 29580 h Excellent maintenance Punching force: 200 kN Work field: 1270 x 2500mm With replacement: 1270 x 5000mm Thickness max. of the material: 3.2mm ( ST-400N/mm2 ) Maximum material thickness: 3.2 mm. (brush table) Swan neck: 1,310mm Max weight of the piece: 50kg (F4) 150kg (F1) X-axis feedrate: 100m/min Y-axis feedrate: 80m/min Control: Amada AMNC-PC RS-232C serial interface Simultaneous axes speed: 128m/min Turret traverse speed (bidirectional): 30 1/min Max cadence punching with dies VACUUM” (hit rate): 500/min (5mm stroke, 25.4mm pitch) 780/min (5mm stroke, 1mm pitch) 1800/min (1.4mm stroke, 0.5mm pitch) Stroke length: 36 mm. Punching accuracy: ±0.07mm C axis speed: 60 rpm Stations: 45 of them 4 AMADEX Diameter max. tool: 114.3mm Tool change ...
Code: 0332 Brand: AMASPRES (ITALY) Model: 3000 Membrane press Working size: mm 3000 x 1300 Opening mm 500 Working height mm 250 Cover opening and closing with vertical pneumatic pistons This press is suitable for veneer of shaped pieces , such as window sash frames, curved pieces Upper heating with hot air Heating of lower side with hot air Consuption about 9 kwt Working cycle: about 10 min. Complete compressor for lifting of cover and under cover Processing prevacuum adjustable up to 6.5 atm The machine is equipped with time alarm, thermostat, thermometer, warning lights for calories and pumps Overall dimensions press mm 4100 x 1700 x 2050 h - Weight kg 1800 Overall dimensions depressor mm 1400 x 500 x 900 h - Weight kg 100
AMP VBF-60/60/100-1.5 horizontal vacuum furnace was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long workpieces with a maximum weight of 600 kg, without the risk of deformation. The AMP vacuum furnace ensures that a constant temperature of 1180°C is maintained throughout the treatment, due to the insulation inside the heating chamber in the form of a graphite mat fixed to the chamber casing by molybdenum rods with graphite composite pads. The capacious heating chamber also contains heating elements, charge holding supports and cooling nozzles through which cooling gas flows during the cooling cycle. All parameters, such as vacuum, temperature course and cooling gas pressure, are programmed in a special controller, installed in a ...
Used twin-screw, parallel, counter-rotating extruder by Amut model BA92 NOMAX. New 2011. Output: 270 - 370 kg/h Hours of operation: 53638 h Other details: - Diameter of augers 92 mm - L/D ratio 28:1 - Drive power 60 kW (400V, 50 Hz, 3 ph) AC - Two sets of screws -for ABS processing -for PVC processing - Number of cylinder heating zones 7 - Number of cylinder cooling zones (air) 4 - Number of heating zones for head and adaptor 5 + 1 - Built-in pressure and temperature measurement system for plastic mass - Thermal oil unit for thermostating the worms for PVC - Drive power of vacuum degassing pump 11 kW - Drive power of screw feeder 1.5 kW - Without control (subassemblies available according to the list)
LIQUIDATION of special vacuum system for piston stuffers that lack vacuum. Manufactured by ANDHER model VAE-10. Its status is of re-release (occasion). Patented system for vacuum stuffing, using concentric funnels attached to any type of stuffer. Improve finish and quality naturally, save gut! The machine is ready to plug in and work with. Thanks to manufacturing based on design and high technology, ANDHER VAE-10 is a Patented System that achieves: - More quality in the product, by eliminating the air inside the casing without added chemistry. - Savings in process time, by not having to puncture the gut to extract the air. - Significant savings in casing, by compacting and completely filling the interior with meat, getting more kilos with less gut. - Improve the presentation, as there are no air spaces. - Reduce the loss and the time of curing or oreo of the sausage. - Eliminate ...
REF-2258 ANGELUS 60L AUTOMATIC CAN SEAMER WITH 6 SEAMING HEADS AND 24-VALVE VACUUM FILLING MACHINE Automatic can seamer with 6 seaming heads. Manufacturer: Angelus. Model: 60L. Can size: ø73mm. Complete with a 24-valve vacuum filling system (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,600mm.
Mobile vacuum station for use on a degassing opening on the extruder or tool as well as for support in vacuum profile forming - a water ring vacuum pump VG-55 mounted on a welded and painted steel base frame with maximum vacuum Volume of 55m3/h, with kpl. connected supply and cooling system - Vacuum connection: 1x connection pipe with internal thread R1" or GEKA coupling and hydraulic hose 2TE DN25 length 700mm - a VA service water separator and storage tank with fresh water connection R1/2", level switch and drain tap for easier daily cleanse - a cooling coil built into the separation tank and removable cooling coil made of hde-ribbed tube - Water drain on water tank: R1 1/4" - Cooling water connection to cooling coil: R3/8" - an additional vacuum separation container made of steel (hot-dip galvanized) in front of a vacuum pump for separation (diffusion) of the ...
Used Apag SRV20 rotary / vacuum filter. - 20m2 filtration area - Filter drum diameter 1721mm - Length of filter drum 3750 mm - Rotational speed of the filter drum 0-9 r.p.m. - Vacuum pump capacity 450m3 / h - Extraction pump capacity 36m3 / h - Feed pump capacity 36m3 / h - Air consumption 1 Nm3 / h - Water consumption by a 1 m3 / h vacuum pump - Washing water intake 50-80 1 / m3 - 2.2 kW filter drum power consumption - Power consumption of the cutting knife cutting 0.18kW - Power consumption of the 11kW vacuum pump - 2.2kW feed pump power consumption - 3kW extraction pump power consumption - 1.1 kW coadiuvante mixer power consumption - Acid resistant design. - Weight 4300 kg. - Year of construction 2002. - Manufacturer's documentation.
Used Apag SRV20 rotary / vacuum filter. - 20m2 filtration area - Filter drum diameter 1721mm - Length of filter drum 3750 mm - Rotational speed of the filter drum 0-9 r.p.m. - Vacuum pump capacity 450m3 / h - Extraction pump capacity 36m3 / h - Feed pump capacity 36m3 / h - Air consumption 1 Nm3 / h - Water consumption by a 1 m3 / h vacuum pump - Washing water intake 50-80 1 / m3 - 2.2 kW filter drum power consumption - Power consumption of the cutting knife cutting 0.18kW - Power consumption of the 11kW vacuum pump - 2.2kW feed pump power consumption - 3kW extraction pump power consumption - 1.1 kW coadiuvante mixer power consumption - Acid resistant design. - Weight 4300 kg. - Year of construction 2002. - Manufacturer's documentation.
Manufacturer: APDTip: 12 SCPumping speed 3600 l/sCapacity 5x10-6 TorrIdeal for high vacuumNumber: 11 pcs; ready for use
A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water precoth 3 bar or slightly higher Residual -0.2 less than 0.1 ppm for a water temperature of 12°C with 1 APV centrifugal pump with 15 KW with 1 vacuum pump, manufacturer Travini Italy, 11 KW with CO2 dosing via needle valve with level control of the entry and exit Water 1 control cabinet on 2 feet standing with Siemens switchgear equipment Dimensions of the system: 2,900 x 1600 x 3200 mm Weight of the plant 950 kg A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water pre-pressure 3 bar or slightly higher residue -0.2 less than 0. ...
Overview The flash pasteurizer was manufactured in 2000 by the German company APV Ortmann (now KHS) and was intensively modernized in 2011. Until recently, the flash pasteurizer was part of a PET bottling line at a large Austrian beverage bottler and is being freed up as the owner is investing in a completely new line. Technical data Capacity 220 hl/ h Heat holding time: approx. 20s 80hl buffer tank, vacuum tight 92% heat recovery by plate heat exchanger Heating of the product to 92°C Automatic control of the water temperature in the hot water circuit