used Other Machining Units for sale

Specifications: Table size 650 mm x 430 mm Spindle motor power 7.5 / 11 kW Maximum table load 300 kg X axis movement 580 mm Y axis travel 420 mm Z axis movement 520 mm Spindle Speed 10,000 rpm The number of tools in the store 20 Spindle Taper ISO 40 FANUC 0i-Mate MD Controller Controller (option) FANUC 0i-MD Machine weight 3,500 kg All main components of the machine are made of cast steel. Any workpiece up to 650 mm in size can be machined with high speed and precision.

Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...

ABG Omega SR 410 from 2010 with 2 flexo printing units 2 diecutters with one GapMaster from Kocher & Beck Manufacturer: AB Graphics Type: SR 410 Year of production: 2010 Flexo printing units: 2 units Rotary die cutting untis: 2 GapMaster: Yes one of the die cutters is Gapmaster Turning bar: Yes Nip rollers: Yes UV System: GEW Please contact us for more information or pricing. Machine is available immediately

Haas EC1600 YZT Basically new! We installed the machine 5 years ago, before that the machine had been standing without being used for a year. The machine has been used approx.80% of dayshift which gives approx. in total 6000 hours. The machine is in top condition, and has been fully served once a year by Haas certified service staff.

ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with  ...

KAAST Millex VPlus 7 CNC machining Centre way back in 2011 complete with Siemens Controller 802S

CNC machining centre for doors, windows and façade elements. Swivel worktop, with pneumatic rotation in the angular range -90°/0°/+90°. Machining at any intermediate angles. Equipped with a 4 kW electrospindle with 24,000 revolutions per minute and an automatic tool change system with 6 positions from the magazine. X/Y/Z axis interpolation numerically controlled. 11.5'' color monitor (touch screen) with simplified Windows-based graphics. Possibility of machining profiles longer than the overall dimensions of the machine. Feed of the X/Y/Z axes via brushless Yaskawa motors. 4 pneumatic clamps manually positioned. Drip cooling. Feed on linear guides. Zero Profile Reference Bumper – Left Side. No.6 ISO 30. Options on request: tool set + flat cutter with a diameter of Ø 120 mm. Barcode reader. ISO 30 mount. Set of 6 ER 32 clamps per spindle (No. 1 Ø 3 mm – No. 1 Ø 5 mm – N ...

ACCUTEX GA 43AL wire EDM machine was built in 2018 in Taiwan. This highly efficient and reliable machine can achieve complex and difficult shapes, making it ideal for the production of precision tools, dies and punches. The traditional drive has been replaced by a direct, closed-loop linear drive system to eliminate backlash and increase cutting capacity by up to 10%, with much lower energy consumption and constant operating temperature. The GA 43AL EDM machine features a state-of-the-art AccuteX CNC control based on a Windows system with touchscreen and compatibility with CAD/CAM software. The controller optimises the machining parameters according to different wire diameters, corner angles, arc radius and workpiece thickness for the best cutting efficiency and accuracy. The wire EDM machine weighs 2800 kg. Technical data of the ACCUTEX GA 43AL wire EDM machine - CNC control: Acc ...

Das Zentren nicht benutzt (Die Pandemie Änderte die Pläne). Das Zentren wurde im Jahr 2020 nach Deutschland gebracht. Accuway Misteiner der besten Hersteller in Taiwan. der Maschinen in die ganze welt liefert Controller Fanuk 0i Spindle speed 10000 rpm Spindle nose taper BT40 Bearing inner diameter 70mm drive system Belt (Direct) X-axis travel 850mm Y-axis travel 550 mm Z -axis travel 150-700 mm Table dimension 1100x600 mm T-slot 5x18x100 Max. weight on table 1000 kg FEED RATES X-axis travel 30 m/min Y-axis travel 30 m/min Z -axis travel 30 m/min Cutting feed rate 12 m/min AUTOMATIC TOOL CHANGE SYSTEM tool magazine capacity 24 pcs Max tool weight  ...

Drilling capacity: 0 mmNumber of drilling units: 0  Spindle taper: 0  CNC Brand: 0CNC Model: 0 Technical dataNumber of drill-heads: 3 Drill capacity: 6 mmDrill depth (spindle stroke): 50 mmTable length: 820 mmTable width: 180 mmTaper in spindleDepth of throat: 150 mmSpindle speeds:number (steps): 6 from: 325 rpmup to: 6000 rpmVoltage 50 Hz 3x: 380 VoltMachine´s weight about: 100 kgVarious accessories:Threading attachment: 3 Coolant systemDrill chuck: 3

More details — Acme X: 1000 - Y: 550 - Z: 600mm metal milling machine English Longitudinal travel X-axe: 1000 mm Cross travel Y-axe: 550 mm Travel Z-axe: 600 mm Dimensions clamping space- table: 1200 x 500 mm Power on spindle: 10 kW Type of millinghead: universal milling head Admission in millinghead (ISO): ISO 40 Max speedrange: 60 - 2700 rpm Control: Heidenhain Power needed (KVA): 20 kW

Mobile pneumatic conveyor unit for powdery products, on base frame, with stainless steel feeding hopper (700 mm x 700 mm, incl. safety grid inside), blow-through rotary vane in stainless steel (200 mm Ø, 0,55 kW drive) by Seeger, Aerzener GMA-blower incl. Drive, air filter, compensation tank and switchgear cabinet.

Processing field 1300 x 3200 mm Z axis 200 mm 2 Fields of work Automatic lubrication Rotary tool changer 8 slots removable with tool changer on the machine stand or change on 12 seat changers Net weight approx. 4 ton

CNC machining center VEGA 5X 5 axis center

AFM Harnaś R 550 E CNC machining centre built by the Polish company AFM ANDRYCHÓW in 2006 is used for precision workpiece machining. The machine used in production facilities, is distinguished by its exceptionally stable construction and reliable high-speed spindle. The offer also includes equipment comprising, among others, a 16-position tool magazine and a convenient to use FANUC Series 0i-MC CNC controller. The Harnaś R-550 E CNC vertical machining centre weighs 3300 kg. Technical data of the AFM Harnaś R 550 E CNC milling machine - work table dimensions (L x W): 360 x 720 mm - feed rates in the X/Y/Z axis: 550/410/510 mm - maximum spindle rotational speed: 8000 rpm - minimum spindle rotational speed: 45 rpm - spindle taper: ISO BT 40 - spindle torque (at nominal rpm): 47.7 Nm - instantaneous spindle torque (at nominal rpm): 70 Nm - T-slot number: 3 - T-slot width: 14  ...

test by Resale

test par revente

AGIE AGIECUT EXCELLENCE 2 wire EDM machine built in 1999 in Switzerland, is used in the production of e.g. precision dies, tools and punches. For the machining of workpieces, the machine uses advanced electrical erosion technology which makes it possible to achieve difficult shapes in even the hardest materials. The use of this method further minimises or completely eliminates the need for other secondary processes, such as polishing. The AGIE EDM machine is equipped with a state-of-the-art AGIEVISION CNC controller and brushless axis servo motors to guarantee the highest machining accuracy and precision in the shortest possible time, with low energy consumption at the same time. The machine also comes with among others an integrated generator, a semi-automatic wire threading system and the AGIESETUP 3D measuring probe for automatic detection of the plane and position of the workpiece ...

BRAND: AGIE YEAR: 2000 MODEL: AGIEMATIC + AGIEPULS 60 HSF APPLICATION TYPE: EDM LOCATION: ITALY MACHINE TYPE: EROSION MACHINE AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: AGIE GINDUMAC ID: IT-EDM-AGI-2000-00002 Technical Information CONTROL UNIT BRAND: AGIE MOVEMENT X-AXIS MOVEMENT: 350 MM Y-AXIS MOVEMENT: 250 MM Z-AXIS MOVEMENT: 350 MM TABLE OUTER LENGTH: 600 MM OUTER WIDTH: 450 MM TABLE LOAD: 400 KG Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - CNC EDM WITH C AXIS AND 28 STATION - TOOL CHANGER - ON BOARD PROGRAMMING. 28 STATION - TOOL CHANGER. 60A GENERATOR - MAX. WORKPIECE LENGTH: 840 MM - MAX. WORKPIECE WIDTH: 600 MM - MAX. WORKPIECE HEIGHT: 250 MM - MAX. MACHINING CURRENT 60 A

Control unit Heidenhain iTNC 530 X-Axis travel 800 mm Y-Axis travel 600 mm Z-Axis travel 500 mm X-Y-Z axes speed 20 - 20 - 40 m/min Table length 610 mm Table width 610 mm Table load 120 kg Spindle speed 24000 rpm Spindle taper HSK A 63 - HSK E 50 Motor power 25/21 kW Tool changer 120 positions Dimensions L 6500 x W 5500 x H 3000 mm Weight 8300 kg

This AGIE CHARMILLES MIKRON HSM 400 LP Vertical Machining center was manufactured in the year 2013 in Switzerland and has 18727 production hours, of which 18377 are spindle hours. It is equipped with a HEIDENHAIN 530 control unit and has 3 axis. The machine has a spindle speed of 42000 rpm.

This AgieCharmilles MIKRON VCE 1400 PRO Vertical machining center was manufactured in the year 2009 in Switzerland and has 30978 hours, of which 13309 are spindle hours. It is equipped with Heidenhain iTNC 530 control unit and has 3 axis. The machine has a spindle speed of 100 - 10000 rpm, and includes a RENISHAW 3D IR Measuring Probe MP12, Tool measuring probe 3D TS27, and a Set of tool holders as additional equipment, is in very good condition and well maintained.

BRAND: AGIECHARMILLES YEAR: 2009 MODEL: MIKRON VCE 1400 PRO APPLICATION TYPE: MILLING LOCATION: POLAND MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 3420 MM MEASUREMENTS DEPTH: 3250 MM MEASUREMENTS HEIGHT: 2790 MM MACHINE WEIGHT: 8700 KG CONTROL UNIT BRAND: HEIDEINHAIN MODEL: ITNC 530 MAIN DRIVE SPINDLE SPEED RANGE: 100 - 10000 1/MIN SPINDLE MOTOR POWER: 12/18 KW TOOL TAPER: BT 40 NUMBER OF AXIS: 3 MOVEMENT X-AXIS MOVEMENT: 1400 MM X-AXIS RAPID TRAVERSE: 24 M/MIN Y-AXIS MOVEMENT: 650 MM Y-AXIS RAPID TRAVERSE: 24 M/MIN Z-AXIS MOVEMENT: 675 MM Z-AXIS RAPID TRAVERSE: 20 M/MIN TABLE OUTER LENGTH: 1400 MM OUTER WIDTH: 620 MM TOOLS SLOTS IN STORAGE: 24 MAX WEIGHT: 6 KG MAX TOOL LENGTH: 305 MM MEDIA MAIN ELECTRONIC CONNECTION: 3X400V / 50-60 HZ ADDITIONAL EQUIPMEN ...

Capacities: Strokes 690 x 590 (face 320, rear 270) x 560 mm Tilting + 30 ° - 120 ° Table diameter 500 mm Maximum part diameter 650 x 350 mm Maximum load on the table 200 kg Brooch: Spindle nose type BT 40 Spindle speed 15,000 rpm Spindle motor: Power 20 Kw Shop : Number of locations 28 Maximum tool diameter 65 mm Maximum tool length 250 mm Dimensions: Length 4300 mm Width 2500 mm Weight 9T3 Equipment : Double filtration chip conveyor Tool center coolant 35 bar Spindle cooling Rules on all axes Documentation

To be sold on behalf of a customer. Condition new. 4. Axis for CNC machine to program via control. Hydraulic. Heavy-duty design

Machine Details Stock-No. 1105-03925 Type of machine milling machining centers - universal Make AKIRA SEIKI Type RMV 250 RT 5 AXIS Year of manufacture 2014 Type of control CNC Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock Dreieich Technical details X-Travel 500 mm Y-Travel 250 mm Z-Travel 400 mm table-size ROUND TABLE 250 mm spindle taper ISO HSK 63 spindle turning speed range 45 - 12000 rpm spindle drive motor 11 kW tool change unit 24 CNC-control FANUC OIMD voltage 380 V max. table load 200 kg Throat 380 mm total power requirement 17 kVA Weight of the machine approx. 5 t dimensions of the machine approx. 3.5x 2.5x 2.60 m Additional information AKIRA SEIKI TYPE RMV 250 RT FROM YEAR 2014 - coolant equipment TROUGHT THE SPINDLE 20 BARS CGIP CO? VOYER 5 AXIS MACHINE IN GOOD CONDITION

Machine in good technical condition, after agreement possibility of testing. The spindle after complete overhaul January 2024. NC system: Mitsubishi 720. Renishaw tool probe. Spacing in X/Y/Z axes 760 / 445 / 520 mm. Maximum speed 12000, 15000 rpm. Spindle taper: ISO 40 / BT 40. Weight 4 500 kg.

This Akira Seiki V5 XP Vertical Machining center was manufactured in the year 2008 in Taiwan. It is equipped with a Fanuc Series Oi-MC control unit and has 3 axis. The machine has a spindle speed of 12000 rpm, is in good condition and well maintained.

BRAND: AKIRA SEIKI YEAR: 2008 MODEL: V5 XP APPLICATION TYPE: MILLING LOCATION: SPAIN MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 3800 MM MEASUREMENTS DEPTH: 2240 MM MACHINE WEIGHT: 7700 KG CONTROL UNIT BRAND: FANUC MODEL: SERIES OI-MC MAIN DRIVE SPINDLE SPEED RANGE: 12000 1/MIN NUMBER OF AXIS: 3 MOVEMENT X-AXIS MOVEMENT: 1300 MM Y-AXIS MOVEMENT: 540 MM Z-AXIS MOVEMENT: 560 MM TABLE OUTER LENGTH: 1400 MM OUTER WIDTH: 480 MM TOOLS TYPE OF TOOL HOLDER: BT-40 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - HIGH PRESSURE PUMP FOR INTERNAL COOLING - DISASSEMBLED SPINDLE REPLACING NSK SUPERPRECISION BEARINGS - GROUND PRELOAD ADJUSTING SPACERS - REPLACED TIE-ROD SPRINGS AND GROUND INNER CONE - READJUSTED CHANGING ARM - GRIPPERS REPAIRED - OVE ...

Travel X-axis 762 mm Y-axis 410 mm Z-axis 460 mm Clamping table Table clamping surface 910x380 mm Max. table load 660 kg Head Spindle speed 20-11000 rpm Spindle holder BT 40 Spindle drive 11 kW Feed Feed X/Y/Z axis 12/12/10 m/min Rapid traverse X/Y/Z axis 36/36/30 m/min Tool changer Number of tools 20 Control Mitsubishi M 70V, electronic handwheel Coolant Coolant tank 150 lt. augers Chip conveyor, coolant through the spindle Accessories Blum TC54-20 Tool Measurement Note The shooting tools, tool holders and cutting tools shown in the pictures are not included

used complete ALBA press feed line with decoiler, feeder/straightener, for material 800 x 4 mm with 7 ton decoiler

CNC WORKING CENTER type ALBERTI EDIT 3000 composition : 1. boring unit ( axe X and Y ) , vertical nad horizontal independent mandrins 2. vertical router 3. horizontal router CNC 90 by TPA volt. 380/50

FOR SALE 4 UNITS ALFA LAVAL S 826 separator YOB 2005 V 380 Hz 50 TO WHOM IT MAY CONCERN; WE VE COMPLETE 4 SETS ALFA LAVAL S 826 SEPARATOR AT OUR STOCK . WE VE ALSO CONTROL PANEL ELECTRIC BOXES ETC... SEPARATOR BOWLS HAS NO ANY DEMAGES. SEPARATORS ARE IN GOOD WORKING CONDATION. SEPARATOR USED AS OIL SAPARATORS AT PAST TENSE. PLS FIND SPECIFICATION ON BELOW. SEPARATORS ARE READY TO TRANSPORT . MAKER ALFA LAVAL TYPE S826 SERIAL OF NO. S 4135619 / 4135620 / 4135621 / 4135622 YEAR OF BUILT 2005 PRODUCT NO. 881201-06-01 VOLT 380V FREQUIENCY 50 Hz MAX SPEED BOWL 12129 r/min MOTOR POWER 5.5kW MADE IN SPAIN IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH U ...

ALKO ECO-JET 35/3N clean air extraction Year of construction: 2004 M-Nr.: 33184130 Suction supports: ø250 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 816 kg Capacity: 3,000 m3 /uur Pressure: 3,050 Pa Power supply: 4.kW, 380V, 9 Amp Filter surface: approx. 23 m2 Cleaning: compressed air Noise: 77 dB(A)

Compact packaging machine from a renowned manufacturer. For example, suitable for packaging food (bakery products, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. -Display with settings for welding time, cooling time, shrink temperature and shrink time. -Perforation possible via three adjustable needle rings. - Maximum package size approximately: length 460 x width 320 x height 200 mm. -Maximum film roll approximately: length 400 mm / diameter 250 mm. -Equipped with a holding magnet. -Working height approx. 900 mm. -Roller holder movable. -Adjustable product slot. -The machine can be moved and locked with castors. -Can also be used as a tabletop unit, as the top part is removable. -230 V / 50 Hz. -Documentation consisting of operating instructions, circuit diagram and spare parts list ...

Packaging machine from a reputable manufacturer. For example, suitable for packaging food (bakery products, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. -Display with adjustment options for welding time, shrink time and shrink temperature. - Maximum package size approximately: length 700 x width 600 x height 250 mm. -Perforation possible via two adjustable needle rings. -Equipped with 2 electric holding magnets for the hood. -2 fans to distribute the hot air. -Roller holder movable. -Adjustable product slot. -Machine can be moved with castors. The machine can be demonstrated under electricity.

Manufacturer: Almab Production year: 2003 Try sorting with 6 pockets Speed: 15 layers per minute Max leght boards 6000 mm Pack 1200X1200X6000 mm (max hight 1400) Max thickness 100 mm infeed conveyors separator turbo separator end milling units left and right feeding chain conveyor measurement scanner roller conveyors board turner to pockets outfeed after pockets one piece feeder three saw trimmer stacker with double packing arms stick cassettes outfeed conveyors pack press Fromm plastic wraping system package stacking machine

ALPHA LASER ALM 200 laser welding machine built in 2014 in Germany (in operation since 2017) is the perfect solution for machining components such as dies, moulds or tools and machine parts. The laser beam welding method used by the machine significantly speeds up the machining process and simultaneously increases productivity compared to standard workpiece welding methods. Materials are joined together with a concentrated light beam of high power density, which results in an aesthetically pleasing, robust weld of high quality. In addition to its excellent performance, the ALPHALASER ALM 200 laser beam welding machine also stands out for its ease of use. The machine operator has an adjustable arm on which there is a special joystick which allows him to freely position and move the workhead in the X,Y,Z axes. All machining parameters are set via a panel with membrane keypad or by using ...

ALPHA LASER ALM 300 laser welding machine manufactured in 2018 in Germany is designed for precision machining of various types of components such as dies, moulds, tools and machine parts. The machine uses the laser beam welding method, in which materials are fused together with a concentrated light beam of high density. It results in an aesthetically pleasing, robust weld of excellent quality, while the process itself is much faster and more efficient than standard welding methods. The offered ALPHALASER ALM 300 laser beam welding machine is also distinguished by its ease of use. All machining parameters are set via a panel with a membrane keypad or by using a multifunction foot switch. The operator can freely position and move the working head in the X,Y,Z axes using a special joystick located on the arm. The slim design of the head provides access to even the most inaccessible areas ...

Used UF system ALPMA / TETRA ALVA LAVAL This plant was used for the following products: -Cream cheese - Quark (low-fat quark as well as quark with 20% and 40% FiT) - Skyr - Concentration of milk 3.7% fat to 37% dry matter Depending on the product, the hourly output is approx. 3,500 - 5,000 litres (milk intake) with a service life of 8 hours. The plant consists of 3 stages: Stage 1: - 6 pressure pipes 6" with 2 spiral winding modules each (filter type SPIRA-CEL DS-UP-IP020-6338E1 Mikrodyn Nadir GmbH) - Filter area per module: 13.4m² - Total filter area: 160.8 m² - Centrifugal pump 145 m³/h, 3.5 bar, frequency converter controlled Stage 2: - 4 pressure pipes (same design as stage 1) - Filter area: 107.2 m² - Centrifugal pump: 160 m3/h, 5 bar, frequency converter controlled Stage 3: - P&F module DSS M37/9/2 from TETRA ALFA LAVAL, 9 m² - Displacement pum ...

distance spindle /table:min /max 190 / 570 mmdistance spindle /table:190 - 570 mmsurface area:650 x 300 mmBoring power:in GG 20 40 mmbore capacity in steel:ST 60 32 mmturning speed range::50 - 5000 UpMtotal power requirement:2,2 kWthreading:GG 20 M30 threading::ST 60 M 24 weight of the machine ca.:1400 kgtable load:max. 150 kgtable height:770 mmtraversing speed:max X-, Y- u. W-Achse 5 m/min max.traversing speed:Z-Achse 3 m/minw-axis:380 mmworkpiece height max.:495 mmtool changing time:ca. 3 secx-travel:450 mmy-travel:300 mmz-travel:180 mmworkpiece weight:1,5 kg

Control Heidenhain iTNC 530 Travel x/y/z 600 mm / 400 mm / 600 mm Tool changer with 24 positions Table clamping surface / max. table load 450 mm x 750 mm / 500 kg Spindle speed range / tool holder 50 – 9,000 rpm / SK 40 Rapid traverses up to 40 m/min Total power requirement / machine weight 13 kW / 3.2 t Machine dimensions L/W/H 2.7 m / 1.8 m / 2.8 m Accessories: Chip collection device, electronic handwheel, IKZ, 3D touch probe

5-Axis CNC Machining Center Alzmetall GS 600 E/5 Year of construction: 2019 Control: Heidenhain TNC 640 x-travel: 460 mm Y-travel: 600 mm z-travel: 400 mm a-travel (swivel axis): -140 / +140 c-travel (axis of rotation): 360° Table surface: Ø 320 mm Spindle: HSK 63 A Rapid traverse: 30 m/min Speed: 18,000 rpm Tool changer: 76x Space requirements: 2.5 x 2.2 x 2.2 m Weight: Approx. 7,000 kg

This 5-axis ALZMETALL GS600E was manufactured in 2015. Key features include a Heidenhain TNC 640 control system, 18,000 rpm spindle with HSK A63, and cutting-edge chip conveyor for impeccable coolant cleaning. Its fitted with tool measuring via laser and a working probe for higher accuracy. The machine offers extensive production capabilities with its automatic door and air sealing for the linear measuring system, ensuring efficiency. This machine represents exceptional value for precision machining needs. Contact us for further details regarding this ALZMETALL GS600E universal machining center.

This 5-axis ALZMETALL GS800/5-T universal machining centre was manufactured in 2015. It boasts advanced technology including Heidenhain TNC 640 control, 30,000 rpm capability with HSK A63, and high precision packages ensuring remarkable exactness up to TP 0.005mm for X, Y, Z axes. Enhanced features like dynamic collision monitoring, tool measuring via laser and a robust security compound window combine to offer peak performance and safety. The ALZMETALL GS800/5-T machine we have for sale is equipped to increase productivity and precision in complex machining tasks. For more information about this ALZMETALL GS800/5-T universal machining centre, please reach out to us.

BRAND: AMADA YEAR: 2003 MODEL: EUROPE 255 PRODUCTION HOURS: 39000 APPLICATION TYPE: PUNCHING LOCATION: LITHUANIA MACHINE TYPE: PUNCHING MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2900 MM MEASUREMENTS DEPTH: 4900 MM MEASUREMENTS HEIGHT: 2150 MM MACHINE WEIGHT: 11000 KG CONTROL UNIT BRAND: FANUC MODEL: SERIES 18I - P MAIN DRIVE PRESSING FORCE: 200 KN MOVEMENT X-AXIS MOVEMENT: 1300 MM Y-AXIS MOVEMENT: 2540 MM MEDIA POWER CONSUMPTION: 29 KW Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - 27 STATION TURRET WITH 3 AUTOINDEXING UNITS - PERIMETER LIGHT BEAM SAFETY SYSTEM - PROGRAM ENTRY FROM AN EXTERNAL COMPUTER VIA A PCMCIA CARD EXTRA INFORMATION - THE MACHINE IS OFFERED WITHOUT TOOLS

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

AMADA HFE 170-3 L CNC press brake was built in France in 2000. The machine designed for bending workpieces with a maximum length of 3100 mm, has seven numerically controlled axes (Y1, Y2, X1, X2, R, Z1, Z2) and 170 tonnes of press force. This allows for very high machining accuracy and, thanks to the deflection arrow compensation function, the desired angle is present along the entire length of the bent sheet. All machining parameters are programmed on the intuitive and easy-to-use AMADA CNC control located on the arm. The press was used for 15656 hours (5.5 years of operation at 8 hours per day). The total weight of the press brake is 12400 kg. Technical data of the AMADA HFE 170-3 L press brake - CNC controller: AMADA - maximum press force: 170 t (1700 kN) - number of numerically controlled axes: 7 (Y1, Y2, X1, X2, R, Z1, Z2) - maximum workpiece length: 3100 mm - deflection  ...

AMADA VIPROS 358 KING punching machine was manufactured in Japan in 1999. The machine is designed for precise punching of holes in workpieces having a maximum length of 1250 mm, 3000 mm width and 50 kg weight, made of mild steel, stainless steel or aluminium. Low noise level and protection of the sheet metal surface from scratches and scrapes caused by the punching process are guaranteed by a machine brush table equipped with two hydraulic clamps to hold the workpiece during the machining process. The punching machine is able to perform up to 1200 punches per minute with a press force of 30 tonnes. The machine is equipped with a FANUC AC Servo X and Y axis drive, 58 tool stations (including four auto index stations) and a control panel with a installed FANUC Series 18-P CNC controller for full control of the punching machine operation. The AMADA VIPROS 358K punching machine has been r ...

Full salad washing line 2 x Washing units, destoning, infeed conveyring, vibros, all electric panels Removed working and have wiring information as was installed and decommissioned by same engineers. Please message for more photographs