used Other Base Units And Machine Components for sale

Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...

ABG Omega SR 410 from 2010 with 2 flexo printing units 2 diecutters with one GapMaster from Kocher & Beck Manufacturer: AB Graphics Type: SR 410 Year of production: 2010 Flexo printing units: 2 units Rotary die cutting untis: 2 GapMaster: Yes one of the die cutters is Gapmaster Turning bar: Yes Nip rollers: Yes UV System: GEW Please contact us for more information or pricing. Machine is available immediately

Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...

ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with  ...

Technical data: Pan working capacity: 150 Kg. Pan speed: 5 - 15 RPM Pan outside diameter: 48" (1219.2 mm) Pan mouth diameter: 19" (482.6 mm) Base construction: Stainless steel Drive motor: 2 hp 1440 RPM Height: 75" (1917.2 mm) Floor space: 61" x 50" (1548.9 x 1270 mm) Weight: 1550 lb (700 Kg) Advanced Specifications flow tab system: A key feature of the Flowtab system is the unique spraygun, designed by BWI Manesty to improve coating efficiency, reduce operational downtime; and simplify cleaning. The automatic clean-out facility prevents fluid blockages within the nozzle, even during extended production cycles; Even at low atomising pressures, the spray rate and pump speed of the Flowtab can be controlled manually via the portable console or, automatically, from the ACS control console, without adjusting the sprayguns. Noted for their ability to deliver fast, flexible a ...

ACCUTEX GA 43AL wire EDM machine was built in 2018 in Taiwan. This highly efficient and reliable machine can achieve complex and difficult shapes, making it ideal for the production of precision tools, dies and punches. The traditional drive has been replaced by a direct, closed-loop linear drive system to eliminate backlash and increase cutting capacity by up to 10%, with much lower energy consumption and constant operating temperature. The GA 43AL EDM machine features a state-of-the-art AccuteX CNC control based on a Windows system with touchscreen and compatibility with CAD/CAM software. The controller optimises the machining parameters according to different wire diameters, corner angles, arc radius and workpiece thickness for the best cutting efficiency and accuracy. The wire EDM machine weighs 2800 kg. Technical data of the ACCUTEX GA 43AL wire EDM machine - CNC control: Acc ...

Drilling capacity: 0 mmNumber of drilling units: 0  Spindle taper: 0  CNC Brand: 0CNC Model: 0 Technical dataNumber of drill-heads: 3 Drill capacity: 6 mmDrill depth (spindle stroke): 50 mmTable length: 820 mmTable width: 180 mmTaper in spindleDepth of throat: 150 mmSpindle speeds:number (steps): 6 from: 325 rpmup to: 6000 rpmVoltage 50 Hz 3x: 380 VoltMachine´s weight about: 100 kgVarious accessories:Threading attachment: 3 Coolant systemDrill chuck: 3

Low-pressure blower GMB 14.8, built 1994, with 11,8 m³/min. volume stream at delta-P = 360 mbar, P1 = 0,64 bar. 44 kW / 1.485 RPM drive, with flow check valve, pressure-limiting valve, tank, air filter, base frame and sound insulation hood.

Mobile pneumatic conveyor unit for powdery products, on base frame, with stainless steel feeding hopper (700 mm x 700 mm, incl. safety grid inside), blow-through rotary vane in stainless steel (200 mm Ø, 0,55 kW drive) by Seeger, Aerzener GMA-blower incl. Drive, air filter, compensation tank and switchgear cabinet.

with skid (pallet) auto-loader for pallet processing incl. two bases for picking up the pallets, maximum panel format 1,750 x 1,400 mm, minimum panel format 650 x 550 mm, Resolution 2,400 dpi, Inline punching system, Optionally, an Arkana 150 development machine (built in 2020) and Parts of a Nela SF-Bender panel automation system (built in 2020), transport and installation worldwide, Price on request

LARGE FORMAT PRINTER AGFA JETI 3324 SL BASE SOLVENT RTR (roll to roll) 6C (PRINTS ON TARP, CLOTH BANNER & VARIOUS MATERIALS) M. No.: 3.324287 • Large format printer with solvent ink • Solvent based ink: 6 colors (4CMYK+2CM light) • Printing width: 3.2 M (3200 mm) • 24 high-performance Spectra piezoelectric printheads • 600 dpi (2-sided printing) • Max. roll weight up to 230 KG • Up to 64 m2 / h • Jeti software RIP (E9YC4000) Equipment / additional information: • Carrier rewind unit: Jeti 3M Solvent (E9WF2000) • Retro Heater Unit (E9ZZL000) • Jeti Spectra head 24 SL PH 3324 (E91UE000) • Vinyl Loader (E9WKB000) • Vinyl Roller Assy (E9ZUA000) • Spare parts kit for Jeti 3324 (E9V4C000) • Backlit camera (E9Z2P) • Complete set of new filters (12 pieces) • 10 meters of new hoses also included • Three sets of new connectors • Origina ...

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.

To be sold on behalf of a customer. Condition new. 4. Axis for CNC machine to program via control. Hydraulic. Heavy-duty design

used complete ALBA press feed line with decoiler, feeder/straightener, for material 800 x 4 mm with 7 ton decoiler

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter drier housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, angle flange, valve flange-Manufacturer: Alco, thermo-valve lower part unused in original packaging-Type: C 501-7 mm/PCN 803235-Price: per piece-Number: 10 Stück-Dimensions package: 105/80/H70 mm-Weight: 0.3 kg/piece

ALFA LAVAL 314 CREAM SEPARATOR AND CLARIFIER COMPLETE WITH CONTROLS, BASE PLATE, WATER VALVES, ETC. NO TOOLS

Used and overhauled Alfa Laval GTPX-517-TGV-15-CEFG-60 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), max bowl speed 4135 rpm, three phase separation design, centripetal pump liquid discharge, deep sludge design lower casing, direct drive configuration, mounted on sub-base, 37 kW drive motor 460/3/60

New Alfa Laval GTPX-517-TGV-15-CEFG-60 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), max bowl speed 4135 rpm, three phase separation design, centripetal pump liquid discharge, deep sludge design lower casing, direct drive configuration, mounted on sub-base, 37 kW drive motor 460/3/60

FOR SALE 4 UNITS ALFA LAVAL S 826 separator YOB 2005 V 380 Hz 50 TO WHOM IT MAY CONCERN; WE VE COMPLETE 4 SETS ALFA LAVAL S 826 SEPARATOR AT OUR STOCK . WE VE ALSO CONTROL PANEL ELECTRIC BOXES ETC... SEPARATOR BOWLS HAS NO ANY DEMAGES. SEPARATORS ARE IN GOOD WORKING CONDATION. SEPARATOR USED AS OIL SAPARATORS AT PAST TENSE. PLS FIND SPECIFICATION ON BELOW. SEPARATORS ARE READY TO TRANSPORT . MAKER ALFA LAVAL TYPE S826 SERIAL OF NO. S 4135619 / 4135620 / 4135621 / 4135622 YEAR OF BUILT 2005 PRODUCT NO. 881201-06-01 VOLT 380V FREQUIENCY 50 Hz MAX SPEED BOWL 12129 r/min MOTOR POWER 5.5kW MADE IN SPAIN IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH U ...

- net.weiht 641 kg - Liquid wolume 253 L - Design pressure 10 bar - Total area 91,9 m2 - material AISI 316 - sealing material EPDMF CLIP-ON

Specifications: 1. Bowl Diameter (mm) 220 2. Bowl Length (mm) 880 3. Length Diameter Ratio 4. Bowl Shape Cylinder Cone 5. Rotation Rate of Bowl (r/min) 5000 6. Relative Centrifugal Force 3076 7. Scroll Conveyor Lined with tungsten carbide hard alloy Single end, Left cycle rotating 8. Main Motor (kW) 11 9. Back drive motor (kW) 5.5 10. Operation mode 24 hours/day 11. Overall Weight (kg) 100 Control Panel: 1. Standard control panel PLC controlled, 2. Basic System with 7” color touch screen – I/O modules Variable Frequency Drive for main and back drive 3. Bearing temperature sensors 4. Vibration Sensor Material of Construction: 1. Screw conveyor SS316L 2. Bowl SS316L 3. Gearbox 40CrMo 4. Bowl ribs SS316L 5. Machine base fine carbon steel (parts in contact with material are coated with SS316L) 6. Shell SS316L 7. Safety cover SS316L 8. Main  ...

ALKO ECO-JET 35/3N clean air extraction Year of construction: 2004 M-Nr.: 33184130 Suction supports: ø250 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 816 kg Capacity: 3,000 m3 /uur Pressure: 3,050 Pa Power supply: 4.kW, 380V, 9 Amp Filter surface: approx. 23 m2 Cleaning: compressed air Noise: 77 dB(A)

Compact packaging machine from a renowned manufacturer. For example, suitable for packaging food (bakery products, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. -Display with settings for welding time, cooling time, shrink temperature and shrink time. -Perforation possible via three adjustable needle rings. - Maximum package size approximately: length 460 x width 320 x height 200 mm. -Maximum film roll approximately: length 400 mm / diameter 250 mm. -Equipped with a holding magnet. -Working height approx. 900 mm. -Roller holder movable. -Adjustable product slot. -The machine can be moved and locked with castors. -Can also be used as a tabletop unit, as the top part is removable. -230 V / 50 Hz. -Documentation consisting of operating instructions, circuit diagram and spare parts list ...

Packaging machine from a reputable manufacturer. For example, suitable for packaging food (bakery products, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. -Display with adjustment options for welding time, shrink time and shrink temperature. - Maximum package size approximately: length 700 x width 600 x height 250 mm. -Perforation possible via two adjustable needle rings. -Equipped with 2 electric holding magnets for the hood. -2 fans to distribute the hot air. -Roller holder movable. -Adjustable product slot. -Machine can be moved with castors. The machine can be demonstrated under electricity.

Stock# U2412-3 Unused progressing cavity pump by Allweiler type AEB 1E 200. Pump is driven via Nord gearbox and el motor 2.2 kW, 1445 rpm, 230/400 V, 50 hz. Pump works with rotation up to 150 rpm. Working output depends on product and rotation and can reach from 5 l/min, up to 500 l/min. At current rotation on gearbox pump can reach 60 l/min / 3600 l/h. Mounted on carbon steel base.

Manufacturer: Almab Production year: 2003 Try sorting with 6 pockets Speed: 15 layers per minute Max leght boards 6000 mm Pack 1200X1200X6000 mm (max hight 1400) Max thickness 100 mm infeed conveyors separator turbo separator end milling units left and right feeding chain conveyor measurement scanner roller conveyors board turner to pockets outfeed after pockets one piece feeder three saw trimmer stacker with double packing arms stick cassettes outfeed conveyors pack press Fromm plastic wraping system package stacking machine

Code 61047 Description Hydr. Surface grinding machine Make ALPA Model RT 1000 Serial No. 53377 Year 1985 Tablesize 1200 x 300 mm Table grinding size L x B x H 1000 x 350 x 400 mm Base size L x B 1000 x 300 mm Speed table movement 3 – 40 m/min. Rapide vertical movement 0,15 m/min Max. distance table – centre grinding wheel 600 mm Grinding stone diam. Stone x Wide x Taper Ø 400 x 50 x 127 mm Spindel power 8,8 kW Spindel speed 1460 rpm Weight 3000 kgs Motor power 8,8 kW – 380 Volt Accessoiries Magneticplate 1000 x 300 mm Coolant Grinding stones, etc. Condition Machine is in normal condition

Used UF system ALPMA / TETRA ALVA LAVAL This plant was used for the following products: -Cream cheese - Quark (low-fat quark as well as quark with 20% and 40% FiT) - Skyr - Concentration of milk 3.7% fat to 37% dry matter Depending on the product, the hourly output is approx. 3,500 - 5,000 litres (milk intake) with a service life of 8 hours. The plant consists of 3 stages: Stage 1: - 6 pressure pipes 6" with 2 spiral winding modules each (filter type SPIRA-CEL DS-UP-IP020-6338E1 Mikrodyn Nadir GmbH) - Filter area per module: 13.4m² - Total filter area: 160.8 m² - Centrifugal pump 145 m³/h, 3.5 bar, frequency converter controlled Stage 2: - 4 pressure pipes (same design as stage 1) - Filter area: 107.2 m² - Centrifugal pump: 160 m3/h, 5 bar, frequency converter controlled Stage 3: - P&F module DSS M37/9/2 from TETRA ALFA LAVAL, 9 m² - Displacement pum ...

BRAND: AMADA YEAR: 2003 MODEL: EUROPE 255 PRODUCTION HOURS: 39000 APPLICATION TYPE: PUNCHING LOCATION: LITHUANIA MACHINE TYPE: PUNCHING MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2900 MM MEASUREMENTS DEPTH: 4900 MM MEASUREMENTS HEIGHT: 2150 MM MACHINE WEIGHT: 11000 KG CONTROL UNIT BRAND: FANUC MODEL: SERIES 18I - P MAIN DRIVE PRESSING FORCE: 200 KN MOVEMENT X-AXIS MOVEMENT: 1300 MM Y-AXIS MOVEMENT: 2540 MM MEDIA POWER CONSUMPTION: 29 KW Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - 27 STATION TURRET WITH 3 AUTOINDEXING UNITS - PERIMETER LIGHT BEAM SAFETY SYSTEM - PROGRAM ENTRY FROM AN EXTERNAL COMPUTER VIA A PCMCIA CARD EXTRA INFORMATION - THE MACHINE IS OFFERED WITHOUT TOOLS

Full salad washing line 2 x Washing units, destoning, infeed conveyring, vibros, all electric panels Removed working and have wiring information as was installed and decommissioned by same engineers. Please message for more photographs

Busbars for any shipbuilder or re-fit project. Produced following the highest European standards and availability rate FOR QUOTATION: INFO@AMP-POWER.NL Maximum Voltage 300 V AC/ 48V DC Number of terminal studs : 4 / 8 Terminal Type : 16 Stud Terminal stud torque : 15.82 Nm Continuos Rating : 545A AC / 600A DC Base Material: Reinforced Polycarbonate Bus Material : Tin-Plated Copper CDA 11 /UNS11000 Weight : 0.79 kg / 1.25 kg

VERTIwrap-Komplettanlage - sofort verfügbar! VERTIwrap Complete System - immediately available! Versandbereit ab Reinbek/Hamburg! Ready for shipment from Reinbek/Hamburg! Inklusive: Including: - Zufuhrbehälter - Vibration Feeder - Becherwerk/-förderer - Z-Conveyor - 14-Kopf-Kombinationswaage (1.3L) - 14-head multiweigher (1.3L) - Platform - Platform - AMTEC S100L Packaging machine - AMTEC S100L Packaging machine - Abfuhrförderer - Outfeed Conveyor - Kontrollwaage - Check Weigher - Sammeltisch - Collection table Fast alle Bauteile aus Edelstahl SS304, Mitsubishi Steuerung, pneumatische und elektrische Bauteile von Markenherstellern wie Omron, Festo, SMC, Schneider, Siemens, etc. Nearly all components are of Stainless Steel SS304, Mitsubishi Controller, pneumatic and electric components by brand manufacturers like Omron, Festo, SMC, Schneider, Siemens etc ...

Country : Denmark Year of construction : 2019 Category : other machines Manufacturer : ANT Model : 20/ 24 HL Availability : Immediately SKU : DK-OTH-ANT-2019-00001 overview The entire brewery facility becomes vacant as the seller changes location. The machines are fully functional and most are from 2019. The plant can be visited until the end of July. components mash tun Double jacket, 24 hl, with agitator and spray ball mash filter | Landaluce LAMBDA type 800x800, 500kg malt equivalent Includes stainless steel funnel Including progressing cavity pump (INOXPA) model KiberKSF flow meter | Endress + Hauser | Promag H mash pump | Packo | Mash pump ICP2 / 50-200 Cauldron | ANT | 24h double coat, 24hl, steam condenser, Hop basket and kettle cooler hot water tank | ANT | 40hl Plate cooler | ANT Plate cooler with pre-filter and carbonization stone for ...

● System : ANYCUBIC Photon Mono X ● Operation : 3.5 inch touch screen ● Build Volume: 192mm(L)120mm(W)245mm(H) ● Light-source: high-quality filament (wavelength 405nm) ● XY Res.: 0.050mm 38402400(4K) ● Z Axis Res.: 0.01mm ● Layer Res.: 0.01-0.15mm ● Printing Speed: MAX 60mm/h ● Rated Power: 120W ● Material: 405nm UV Resin ● Software : ANYCUBIC Photon workshop ● Connectivity : USB ● Technology: LCD-based SLA ● Printer Size: 270mm(L)290mm(W)475mm(H) ● Net Weight: ~10.75kg

Aquatherm WLR 11 water chiller, cooling medium water, cooling capacity 1.1 kW based on an ambient air temperature of 27°C and a water inlet temperature of 15°C, coolant R12, electrics 220V/1 Ph/50Hz, power consumption 0.7 kW

Screw diameter; 55-35 mm Injectable volume: 558 - 139 cm3 Injection pressure: 2380-2500 bar Column width: 630 x 630 mm Mould thickness min: 300 mm max: 600 mm Aperture stroke: 600 mm Cores: 2 Robot Interface: Yes Options: Rotating base: Arburg 243849 year: 2012

- agregat card ARB 425 - analog output card ARB ARB 390 - output card ARB 409 - base board card SN. 193170 + SN 143537 ARB 729 + SN 173858 - panel card ARB 256, ARB 414 - control card ARB 692 - CPU card ARB 726, ARB 251 - diagnose card ARB 389 - disk controller card ARB 500 - input card ARB 254, ARB 705 - injection control card ARB 460, ARB 328, - elektronic card ARB 252, ARB 255, ARB 380 - inside press card ARB 259 - base board card ARB 372, ARB 523 - motor control card ARB 307, ARB 440 - 24V card ARB 381 - proporcional valve card 0 811 405 047, ARB 330 - memo card ARB 339, ARB 508, ARB 526 - heating control card ARB 365, ARB 404, ARB 530 ARB 640, ARB 730, yPIII - distributor card ARB 511, ARB 534, ARB 538, ARB 539 - video card ARB 258, ARB 535 - amplifier card, modul card - rectifier - transducer card ARB 302, ARB 399, ARB 733 - power supply Deutronic ED-60 -  ...

Shrink sleeves tunnel, for shrinking sleeves. completely overhauled! YOC 2002 Manufacturer: ARCOR GmbH, Power up to 6000 units per hour. If you have any further questions, please do not hesitate to contact us

BRAND: ARKU YEAR: 2020 MODEL: EDGEBREAKER 1000 PRODUCTION HOURS: 960 APPLICATION TYPE: DEBURRING LOCATION: POLAND MACHINE TYPE: DEBURRING AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 1800 MM MEASUREMENTS DEPTH: 1950 MM MEASUREMENTS HEIGHT: 2050 MM CONTROL UNIT BRAND: ARKU Additional Equipment - STANDARDS WET DUST COLLECTION UNIT - 1 ADDITIONAL MODULE UNITS FOR SURFACE FINISH - 3 MODULAR MACHINING UNITS - BRUSH DISC Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MATERIAL: STEEL, STAINLESS, ALUMINIUM - MAX THICKNESS: 0. 5 - 12 MM - MAX PASSAGE WIDTH: 250 MM - MIN WORKPIECE DIMENSIONS: 15 X 15 MM - PASS HEIGHT: 940 MM - MAX FEED RATE: 6M / MIN

Arlo Mk5 - 2050Admission in drilling-spindle (morse): Mk5 Max drilling capacity: 63 mm Base dimensions (1) Table dim (2) : 2900 x 1250 x 250 mm Height-travel arm (Y-axis): 1200 mm Min dist. round column--drillingsp (X-axis): 450 mm Max dist.round column -- drillingspindle: 2050 mm Max drilling-depth: 400/145 mm Speeds: 20 > 1600 rpm Power on the spindle: 5,5 kW Height: 3110 mm Weight: 1250 mm ACCESSORIES: 3150 mm Cooling system: 7 ton

High-performance milling spindle, unused                high speed milling spindle, unused  high speed milling spindle, unused/new   Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                            FS 40-10-30-4- AOW                                                                  B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

High-performance milling spindle, unused                high speed milling spindle, unused   Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                                         FS 40-10-30-4- AOW                                                                                B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

Max speed 150 m/min Unwinder + E&L web guide Ø 1000 m, max. weight 300 kg Printing units 8, gearing 1/8”CP Max. web width 413 mm Max. print width 407 mm (16”) Printing cylinders 16 x 12,625” (320,662 mm), 16 x 14,125” (358,77m mm) Anilox cylinder see list Lateral register: ± 5 mm Longitudinal adjustment unlimited at all printing and die cutting stations, selectable from mobile control console, smallest adjustment 0,05 mm. Automatic register control: Sensotec automatic register control, web to web comparison for print stations and web to cylinder for die cutting stations. Front to Back Register control system Web inspection Tecscan web inspection system Drying optimized hot air drying Web turner rail mounted moveable platform with E&L web guide. Webguide Fife web guide bef ...

Plate length: 5500 mmPlate width: 2700 mmPlate thickness: 450 mmNumber of T-slots: 9  Size T-slots: 48 mmType of material: Cast Iron   SPECIFICATIONS Length   5500 mm Width   2700 mm Height   450 mm T -slot size   T 48 No. Of T-slots  9 x Distance from T to T-slot / Jump  300 mm Weight a plate approx.14 Ton Number off matching pieces 3  

Plate length: 635 mmPlate width: 500 mmPlate thickness: 28 mmNumber of T-slots: 4  Size T-slots: 28 mmType of material: iron   Number of T slots:       4 Jump from T to T:        160mm T size:                  28mm Number of matching pieces:2 Length:                  635mm Width:                   500mm Height:                  690mm Weight:                  280kg

Plate length: 3000 mmPlate width: 1500 mmPlate thickness: 400 mmNumber of T-slots: 5  Size T-slots: 32 mmType of material: Cast Iron   MAKE   Asquith UK TYPE    CAST IRON YEAR    80 er SPECIFICATIONS Length    3000 mm Width      1500 mm Height     400 mm T -slot size   T 32  No. Of T-slots   5 x Distance from T to T-slot / Jump   305 mm Weight a plate approx.4000 Ton Number off matching pieces   2 DIMENSIONS Length   3000 mm Width    1500 mm Height    400 mm

Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air r ...

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMIN ...

SECOND-HAND 6 HEADS LINEAR COPYING SHAPER AND SANDER BACCI MOD. FC6 2500 – CE RULES - units 1-2 milling units - units 3-4 sanding units - units 5-6 sanding units - working length mm. 2500 - working height mm. 180 - n. 8 locking cylinders - cabin (4 sides + roof) - year 1999

SECOND-HAND LINEAR COPYING SHAPER BACCI MOD. FC8 2500 - Unit 1-2: milling units - Unit 3-4 milling units - Unit 5-6: sanding units - Unit 7-8: sanding units - Working height mm. 180 - Max. working length mm. 2500 - 8 locking cylinders -Cabin - S/N 1481 - CE year 2000