used Gasoline engines for sale

Generator motor with frame only 200 operating hours Tank 60 kVA approx. 50 kw 400 V

ABB MOTORS 3 ~ ENGINE M2AA 112 M CT. FIP: 55 3GAA 112001 - HAD 27,145 Number: 9680260510002 V Hz R/min KW A 440 60 1725 4.6 8.5

OEM Bearing Assembly - Blower Side (p.n. 32) for ABB VTR 200 / 201 Turbocharger Bearing unit is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

OEM Oil Pump - Blower Side (p.n. 47) for ABB VTR 400 Turbocharger The Pump is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

OEM Oil Pump - Turbine Side (p.n. 48) for ABB VTR 400 Turbocharger The Pump is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...

Motor Rotor Type 3-Phase Motor Power (KW:) 630 KW

OVERHAULED & BALANCED COMPLETE TURBOCHARGERS READY TO ASSEMBLE ON ENGINE

CARTRIDGE GROUP WITH NEW BEARING SET. READY TO ASSEMBLE ON ENGINE MAK 6M43C. OVERHAULED AND DYNAMIC BALANCED.

1 piece ABB TPL 77-B12 turbocharger complete available New In our stock in Istanbul Please contact: info@fin-marine

ABB TPL65-A30 EXHAUST GAS TURBOCHARGERS 4 PCS AVAILABLE FROM OUR OWN STOCKS

TPL69-A30 TURBOCHARGERS FOR SALE

Available for Sale ! ABB Turbo Charger Type: TPS57 F32 For Jenbacher J620 Condition: Used Excellent

ABB TPS61-F33 EXHAUST GAS TURBOCHARGERS FOR SALE

Step-Up Power Transformer ABB 8000 kVA, 21/6 kV, 50 Hz Good condition step-up transformers for mid-voltage step up from 6 kV to 21 kV with capacity of 2 x 8000 kV / 50 Hz. Transformer was made by ABB in 1999 and it has been operated approx. 32000 hours and dismantled in 2021 in full operational condition. It has ONAN cooling system and it is oil filled with external expansion vessels. Outgoing voltage can be regulated with a tap switch from standard 21000 kV +/- 2 x 2.5 % Technical Data Manufacturer ABB Finland Manufacturing year 1999 ABB Type KIRP 24 NC 800 Nominal power 8000 kVA / 50 Hz Nominal voltage 21000V +/- 2x2.5% Nominal currency 202A / 769.8A Insulation level LI 125 AC 50 / LI 60 AC 20 Direction N-A-B-C / a-b-c Total weight 16600 kg Weight of oil 2950 kg

OEM Bearing Assembly - Turbine Side (p.n. 38) for ABB VTR 400 Turbocharger Bearing unit is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

OEM Bearing Assembly - Turbine Side (p.n. 38) for ABB VTR 200 / 201 Turbocharger Bearing unit is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

TO WHOMIT MAY CONCERN ; WE VE NEW UNUSED COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 AT OUR STOCK ADDATIONALY WE VE RECON COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 COMPRESSOR SIDE AND TURBINE SIDE ARE NEW .. THIS ROTORS ARE FIT FOR BELOW EXHAUST TURBO CHARGER TYPE TYPE ABB VTR 304 P 11 HT 439312 n max 467 n bmax 443 t max 680 t bmax 650 HZTL 428765 P3 EX STOCK. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

OEM Bearing Assembly - Blower Side (p.n. 32) for ABB VTR 400 Turbocharger Bearing unit is delivered as a single piece and is new and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

DEAR'S SALE, STD CRANKSAFT ABC 6DXC-720-100A Good condition, report... Liner, Conrod, piston etc.. main parts Brgds Hakan KUSCU +905323642509 info@kscege.com

Engine is good for spare parts Crankcase and crankshaft is a total shame Turbocharger is sold

DEAR'S SALE, COMPLETE ABC 6DXC-720-100A Std cranksaft good condition Brgds Hakan KUSCU +905323642509 info@kscege.com

SOLD! ABC ENGINE 8XDXC 886KW @ 750 RPM diesel engine ABS BJ 2002

Engine + compressor AEG 60Hz / 440V / 222KW / 37,5A

Engine Brand: AGCO, Conditie: CORE, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/221617, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 44AWF

Hi, I offer you Hydraulic power pack-three engines 90 KW each -oil tank 4500l, -Each engine drives two hydraulic pump gear -Pump Model 45V60A Power supply power to the extruder scrap shears in the set are three Dimensions chydrauliczne 160x190 coolers coolers 3 x -cooling connection 100 mm -power connection 80 mm Very Good Condition Net price: 59900 $-€14000 contact: + 48 600-517-834

Airmaster RMB 18 IVR Screw Compressor + Tank AIR MASTER RMB 18 IVR SCREW COMPRESSOR WITH COMPRESSED AIR TANK The screw compressor is an indispensable source of compressed air power for industrial plants. It is equipped with a screw stage with an asymmetrical profile for increased efficiency and durability. Its optimal characteristics across a wide range of rotations make the variable speed RMB IVR 18 compressor energy-efficient. Thanks to this technology and the drive transmission system, the compressor can achieve energy savings of up to 35%. The compressor has a built-in dryer. TECHNICAL PARAMETERS OF THE COMPRESSOR: Motor power: 18 kW Min. pressure: 5.5 bar Max. pressure: 13 bar Min. capacity: 47 m3/h Max. capacity: 210 m3/h Noise level: 70 dB Weight: 375 kg TECHNICAL PARAMETERS OF THE COMPRESSED AIR TANK: Capacity: 50 l Pressure: 11 bar Weight: 190 kg Connec ...

Japanese Generator set Brand Airman 200kva Prime Power only Run 3643 hours ,used low hour Japanese Airmen Diesel Genset available in stock for sale, Hino ENGINE WITH Japanese ALTERNATOR WITH original Airmen CONTROL PANEL SYSTEM WITH SOUND PROOF CANOPY.

Following Separator available for sale. Make:ALFA LAVAL, MADE IN ITALY Type :FOPX 609 TFD 24-60 Serial No.:4093191 Year:1996 Product No.:881244 – 02 -02 Machine Top Part:557057 – 01

Following Separator for sale. Make: Alfa Laval, Made In Italy Type: FOPX 610 TFD 24 Serial Number: 4097640 Year: 1997 Product No.: 881244-03-03 Machine Top Part: 561012-01 Bowl: 554048-04 Machine Bottom Part: 540225-10 Max Speed Bowl: 5148 Speed Motor Shaft: 1800 El. Current Frequency: 60 Recommended Motor Power: 12KW Max. Density of Feed: 1100KG/M3 Max. Density of Sediment: 1350KG/M3 Max. density of Operating Liquid: 1000KG/M3 Process Temperature min/max: 0/100 OC

Following Separator available for sale. Make: ALFA LAVAL Type: LOPX 705 SFD 30 Serial Number: 4086702, 4087320 Year: 1996 Bowl Speed: 7540rpm Motor Power: 1800rpm No. of Phase: 3 KW: 4 HZ: 60 Made in Spain

IN GOOD CONDITION FOR USE, stoped running

Following Separator available for sale. Make: ALFA LAVAL Type: LOPX709SFD34-50 Serial Number: 4082348 Year: 1995 Product Number: 881243-02-02 Machine Top Part: 557114-01

Following separator available for sale. Make: ALFA LAVAL Type: MMPX 304 SGP-11-60 Serial Number: 4044302 Speed Max: 9510 r/min Product No.: 881100-01-01 Machine Topper No.: 545964-01 Bowl No.: 54595-01 Machine Bottom Part: 544466-04 MOTOR Make: MAN Volt: 260/440 HZ: 50 / 60 RPM: 3480 KW: 3.55

Following separator available for sale. Make: ALFA LAVAL Type: MMPX 403 SGP-11 Serial Number: 4119247 Year: 2002 Product No.: 881099-03-01 Inlet & Outlet: 561312-01 Bowl: 561123-01 Machine Bottom part: 561371-01 Max Speed (Bowl): 9365 r/min Speed Motor Shaft: 3600 r/min HZ: 60 KW: 2.5 Maximum Density of Feed: 1100 kg/cm2 Maximum Density of Sediment: 2631 kg/cm2 Maximum of operating Liquid: 1000 kg/cm2 TEMP: 0/100 Deg.C MOTOR Make: ABB Volt: 380/420/220/240D / 40/480/250/280b HZ: 50/60 AMP: 4.6/8.00 / 4.67/8.00 RPM: 2880/3470 KW: 2.2 /2.5 COS Q: 0.87 / 0.86

Following Separator available for sale. Make: Alfa Laval Type: MOPX 210 TGT-24 Manufacturing Number: 2997227 RPM: 1700-1800 r/m ,142-150 Product No.: 881030-01-01 Machine Topper No.: 539931-80

Following Separator available for sale. Make:ALFA LAVAL Type:WHPX 405 TGD 24-60 Serial Number:4020415 RPM:1700-1800 r/m ,142-150 Product No.:881071-01-01 Machine Topper No.:544230-01 Bowl No.:544225-01 Machine Bottom part:540224-02 MOTOR Make:Made in Italy LS 132S 38440 VOLT:440 HZ:60 KW:7.5 RPM:1730

Following separator available for sale. Make: ALFA LAVAL Type: WHPX 510 TGD-24-60 Manufacturing Number: 4015516 RPM: 1700-1800 r/m,142-150 Product Number: 881035-03-04 Machine Topper No.: 544117-02 Bowl No.: 544118-03 Machine Bottom Part: 540225-10

Petrol engine, hydrant key, hydrant key, underground hydrant key -mobile gearbox: with petrol engine -Gasoline engine Manufacturer: Honda Type: GX -Was used as: hydrant key -Speed gearbox: 1-30 rpm -Execution: digital display, revolution counter, right / left rotation -Shaft length: 520 mm -Square holder: 40 x 40 mm -Dimensions: 1400/800 / H1160 mm -Weight: 132 kg

6 servo motors Manufacturer: ABB Alsthom 2x servo motor with gearbox, ALSTHOM, type MC19P R026R, Parvex, 1000W, 3000 RPM, 83V2 2x servo motor with gearbox, ALSTHOM, type MC13S R000R, Parvex, 400W, 3000 rpm, 65V 2x servo motor with gearbox, ALSTHOM, type F9M4 57341, Parvex, 108W, 3000 rpm, 26V Free shipping within EU On request you will receive more photos

Altronic ignition system Controller DISN 801M DISN800 DISN800C DIS500 Series and Many other Part number NEW AND USED Available in stock for Waukesha Man Caterpillar Gas Generator sets.

GAS FIRED STEAM BOILER : MAKE : AMF / CALLENS YOC : 10/1995 CAPACITY : 2.240.000 kcal 2605 kw Pressure : 12,24 kg/cm2 12 bar • With a water supply temperature of 100°C, the steam production should be about 4 tons/hour

Goodday, Please kindly note that, We have in stocks Ansaldo engine and gens Ansaldo 326S 800CV...2 pcs Ansoaldo 194 Gens 130HP 2 pcs If anybody interesting Please don't hesitate to contact with us. Regards Hakan +905323642509

BRAND: ARES-SEIKI YEAR: 2020 MODEL: R5030 PRODUCTION HOURS: 242 APPLICATION TYPE: MILLING LOCATION: SPAIN MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: FANUC GINDUMAC ID: ES-MIL-ARE-2020-00001 Technical Information GENERAL DATA MEASUREMENT WIDTH: 1500 MM MEASUREMENT DEPTH: 2230 MM MEASUREMENT HEIGHT: 2480 MM MACHINE WEIGHT: 2200 KG CONTROL UNIT BRAND: FANUC MODEL: SERIES OI-MF MAIN DRIVE SPINDLE SPEED RANGE: 0 - 12000 1/MIN NUMBER OF AXIS: 3 MOVEMENT X-AXIS RAPID TRAVERSE: 48 M/MIN Y-AXIS RAPID TRAVERSE: 48 M/MIN Z-AXIS RAPID TRAVERSE: 60 M/MIN TABLE OUTER LENGTH: 550 MM OUTER WIDTH: 320 MM TABLE LOAD: 200 KG Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - NUMBER OF T-SLOTS X WIDTH X DISTANCE BETWEEN SLOTS: 3X14X100 MM - LONGITUDINAL COURSE OF THE TABLE: 500 MM - TRANSVER ...

Manufactured: Atelier Francois Type: CE 68B Capacity: up to 2600 m3/h Electric motor: 450 KW Electrical connection: 3 x 400 V / 50Hz Complete with: •Electrical cabinet with Star/Delta start with microprocessor L1 •Dryer type Hankinson •Radiator cooling system •Electrical connection between control cabinet, motor, dryer

We sell used car parts such as engines, gearboxes, drive shafts, body parts from all common car brands

For sale : 2 pcs. the complete TEM-EVO cabinets (w/CPU 1247 3959 KZ) 1 pc. Operating terminal BRT 1247 3955 KZ 2 pcs. I/O-Controller module CMPS 1247 0960 KZ 4 pcs. I/O-Controller module CM16DI 1247 0962 KZ 4 pcs. I/O-Controller module CM8DO 1247 0963 KZ 2 pcs. I/O-Controller module CM16DO 1247 0964 KZ 8 pcs. I/O-Controller module CM8DIO 1247 0965 KZ 14 pcs. I/O-Controller module CM2AI 1247 0966 KZ

AVK UK ORIGINAL COSIMAT -N+ AVR AVAILABLE IN STOCK, NEW SURPLUS AND USED BOTH TYPES AVAILABLE.

xxx

Babcock Wanson TPC1000ES Thermal oil boiler Serial: 5133725 2007, Thermal oil boiler, working pressure 10Bar, working max temp 300'C, fuel natural gas, total volume 317L, 930Kw, complete with pump and oil tank