생산자:
(범주: 112)
기어 호브 테스터 제작: KLINGELNBERG 모델: PWF 250 직경: 250 mm 최소 모듈: 2.5 mm 최대 모듈: 20 mm 중심 사이의 거리: 470 mm 무게: 1500 mm ... 추가 정보
4 축 CNC 기어 쉐이빙, SICMAT – 새틴 100S (200S와 동일) 상표: 시크마트 모델: 라소 100S CNC: 지멘스 810 워크피스 외경: 200 모듈 범위: 0.5-5 mm 공작물 최대 얼굴 폭: 100mm 여전히 작동하는 기계 기타 정보: 기계는 최상의 상태에 있으며 모든 부품이 완전합니다 (여전히 작동 중).
[ 최대 5000 자, 광고주에 대한 정보 없음 ] 상표: 변조 모형: ZFWZ 2000/3 유형: 기어 호버 년:1981 위치:체코 공화국 사양: 심압대가없는 기어의 최대 직경 2100 mm 심압대를 가진 장비의 최대 직경 1450 mm 기어의 최대 얼굴 1060mm 호빙 헤드가있는 최대 모듈 22 최대/최소 중심 거리 1240/150 mm 최소 치아 수 10 최대 압력 천사 45도 테이블 직경/슬롯 수 1800mm/12 테이블에 구멍/길이 600/800 mm 호브의 최대 직경/길이 300/330 mm 공작물의 최대 무게 15000 kg 액세서리: 표준 밀링 헤드 심압대(클램핑 없음) 기어 서포트 세트(신발) 아버 세트 변경 기어 세
판매용 기계는 다음과 같습니다. 중고 기계 유형 Koepfer 173 SPS 1989년 건축, 2022년 전면 개정 기계에는 Klöckner Moeller PLC 제어가 장착되어 있습니다. 기계 색상은 녹색, RAL6011입니다. 커터의 속도 조정은 인버터 및 속도 표시기로 수행됩니다. 공작물과 차동 장치의 톱니 수는 교체 가능한 휠을 통해 조정됩니다. 기계에는 자동 변속 기능이 있는 변속 밀링 헤드가 장착되어 있습니다. 2. 기술적인 자료 최대 모듈 2.5 최대 공작물 직경, 수동 하중 156 mm 최대 공작물 직경, 자동 하중 100mm 최대 톱니 길이 150mm 최대 공작물 길이, 수동 로딩용 360 mm 최대 공작물 길이, 자동 로딩용 260 mm 최대 커터 직경 63 mm 최대 커터 길이 70 mm 최대 커터 변위(변속) 70mm 부분 변속기 4:45 커 ...
control:siemens 1P 6SL 3054--0CE01-1AA0 Documents:vorhanden ... 추가 정보
max. wheel diameter:130 mmgear width:170 mmmax. module:3 min. module:0,5 total power requirement:48 kVAweight of the machine ca.:9 tdimensions of the machine ca.:7,64 x 3,14 x 3,25 mFor technical data, see PDF-File enclosed ... 추가 정보
Dressing diameter:110 Planing width:9999 min. module:0,5 max. module:10 spindle turning speed range:2800 1/minpressure angle: 15 - 25 ° °run-out tolerance:0,001 mmWeight:22 kg ... 추가 정보
max. wheel diameter:400 mmmax. module:10 min. module:0,3 weight of the machine ca.:11,5 tdimensions of the machine ca.:3,3 x 2,75 x 2,8 mmax. number of teeth:999 min. number of teeth:5 Width of teeth:0-300 mmpressure angle max.:30 pressure angle min.:14 workpiece weight max.:300 kgworm grinding diameter:300...205 mmwidth of grinding worm:125+0,7 / -0,5 mmboring diameter:160 H7 mmwith loading device FELSOMAT Type: FZ250 Year of construction: 2002 No tail stock
max. wheel diameter:275 mmgear width:55 mmmax. module:6,5 min. module:1,5 Face Hobbing-Continious ProcessContinuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surfaceC28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, workpie ...
workpiece diameter:38 mmworkpiece length:500 mmrack milling length - max.:610 mmprofile width:92 mmmodule range:0,3-1,3 slide stroke:760 mmdrive motor: kWelectrics - voltage/frequency:380/50 V/Hztotal power requirement:24 kWweight of the machine ca.:10 tSpline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock.A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves
workpiece diameter:38 mmworkpiece length:500 mmrack milling length - max.:610 mmprofile width:92 mmmodule range:0,3-1,3 slide stroke:760 mmdrive motor: kWelectrics - voltage/frequency:380/50 V/Hztotal power requirement:52 kWweight of the machine ca.:10 tSpline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock.A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves
max. wheel diameter:90 mmgear width:300 mmmax. module:3 tip circle diameter:max. 65 mmroot circle dia. min.:28 mmmax. geared Length:150 mmtool length - max.:203 mmtangential ( y-axis ):140 mmaxial ( z-axis ):400 mmTailstock ( z²-axis ):350 mmloading and unloading portal ( z³-axis ):1850 mmmilling head -swivable +/-:+ A = 40 / - A = 40 °working piece table: max. outer diameter / bore hole:120 / 45 mmfeeds X-axis:1 - 10000 mm/minfeeds Z-axis:1 - 10000 mm/minrapid power traverse in X-and Z direction:10000 m/minrapid motion - y-axis:5000 mm/minfast rapid z²-axis ( tailstock ):10000 mm/min.speeds of tool:300 - 4000 U/minworking piece table speed:0 - 1000 1/min.connected load:44 kVAvoltage:400 Vcontrol voltage:24 kWweight of the machine ca.:7500 kgdimensions of the machine ca.:3170 x 2975 x 2440 mm
max. wheel diameter:280 mmmax. module:7 weight of the machine ca.:13 ttable turning speeds:100 U/mintable diameter:250 mmmin. number of teeth:4 hob turning speeds:1500 U/minmax. hob diameter:160 cutter length max.:230 mmMachine in good condition.Available 01.08.2024 ... 추가 정보