사용 LORENZ 판매를 위해

기어 셰이퍼 Lorenz SJV 00 및 기어 변경 및 액세서리 포함.

로렌츠 수직 충격 기계 SV00 - 사진보�

최대 직경: 500 맥스 스트로스 120 최대 모듈 5

최대 직경 250 SINUMERIC 810 씨 연도 1996

사양 라드두르쿰. 900 밀리미터 모듈 최대 9개 힘 21 KW 무게 11 ~ 최대 바퀴 직경: 900 mm 휠 폭 500 mm 모듈 최대 9 커터 직경 200 mm 테이블 클램핑 직경 직경 720 mm 속도 범위 20 ~ 320 rpm. 축 방향으로 0.06...6.0 mm/rev로 공급합니다. 방사형 0.02 ~ 2.0 mm/rev. 스위블 밀링 스핀들 슬라이드 오른쪽/왼쪽: 45 공간 요구 사항 약 3000 x 1,600 x 2,400 mm 무게 약 11 ~ 연결 부하 약 21KW

최대. 바퀴 지름 420mm 기어 폭 120mm 최대. 모듈 8 분. 모듈 0,5 제어 BWO CNC 예. 스트로크 수 32-800 허브/분 총 전력 요구 사항 50kW 기계 CA의 무게. 9톤 기계 CA의 치수. 5.3 x 3.9 x 3.4 미터

max. wheel diameter:180 mm

max. wheel diameter:180 mm

Description: Slotting machine - vertical, technical details: ram stroke - max. 230 mm, throat 230 mm Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 400 mm, weight approx.: 200 kg

Description: Change gear set for Lorenz LS 1000, in a wooden box Approx. Onsite Dimension. (l x w x h): 950 x 600 x 450 mm, weight approx.: 175 kg

Description: Face plate, face plate chuck, face lathe chuck, with 12x T-slots 40x40 mm, Technical details, faceplate diameter 1000 mm, inner diameter 400 / 90 mm, Weight 285kg weight approx.: 285 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,000 x 300 mm

Description: Face plate, face plate chuck, face lathe chuck, with 6x T-slots 35x35 mm, Technical details, faceplate diameter 700 mm, inner diameter 105 mm, height 340mm, Weight 450kg weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm

Flow meter, vibration measurement, display device vibration measurement, monitor display -Manufacturer: Lorenz, measuring amplifier -Type: GM40 -Price: per piece -Number: 5 piece -Dimensions: 75/20/H110 mm -Weight: 0.1 kg/piece

Force measuring device, force measuring device, calibration, force measuring technology, load cell, tensile force measuring bearing, force sensor, tensile and compressive force sensor -Manufacturer: Lorenz, 4 pieces tensile and compressive force sensors with Durbal, joint head joint bearings -Sensor: Lorenz Type K-12 -Measuring range: - 100 kN -Sensitivity: 1,000 mV / V / 0.999 mV / V / 1.001 mV / V -Swing bearings: Durbal EF 35-20-501 -Dimensions toggle rod: 445 to 530 x 81 x 65 mm -Fork head: hole O 35 mm -Number: 4x boxes available, see photos for sensitivity -Price: per box -Dimension box: 590/390 / H200 mm -Weight: 30.2 kg / box.

모듈 1에서 모듈 14까지 샤프트 및 디스크 커팅 휠 사용 가능 : - 다양한 치아 수, 다양한 개입 각도, 다른 커버 프로파일, 다른 헤드 높이, 구멍 및 치수! 샤프트 커팅 휠 모듈 1-3 = 150 유로, 4-5 = 250 유로, >5 = 300 유로 디스크 커팅 휠 모듈 1-3 = 150 유로, 4-6 = 200 유로, 7-10 = 250 유로, 10-14 = 300 유로. 요청시 전체 목록! 이 광고의 데이터는 LogoTech oHG의 기계 관리 인 ModulMWS로 작성되었습니다.

x-travel: 0 mm y-travel: 0 mm table length: 600 mm table width: 400 mm total power requirement: 2 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 150 mm gear width: 42 mm max. module: 3 min. module: 0,5 total power requirement: 10 kW weight of the machine ca.: 6 t External gears, max. Ø 150 mm (or more) Internal gears, max workpiece Ø, approx. 280 mm Gear width, max. 42 mm Module, max. 0.5 - 3 Length of stroke 0 - 50 mm Adjustment of stroke 0 - 70 mm Distance between shaper spindle and body of machine 250 mm Spindle internal table, approx. 45 mm Strokes, roughing / finishing 450 - 1,250 / 2,500 / min Table Ø 250 mm Table bore 100 mm Distance between table and shaper head, approx. 320 mm Axial travel of workpiece slide, approx. 285 mm Feed range, tooth depth 0.01 - 0.063 mm/stroke Rotary feed 0.125 - 3,150 mm/stroke Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight 6,000 kg Accessories / Special Features Built-in hydrostatic straight guide. Built-in raiser plate for raising the shaper head 130 m ...

max. wheel diameter: 400 mm gear width: 75 mm max. module: 0,5 min. module: 60 total power requirement: 25 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 ______________________________________________________________________ ___________ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12 ...

max. wheel diameter: 400 mm gear width: 280 mm max. module: 1 min. module: 4 total power requirement: 15 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: 75 mm max. module: 0,5 min. module: 6 total power requirement: 25 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 80 mm gear width: 44 mm max. module: 5 min. module: Control: SIEMENS 840 C adjustment axis angle shaping sp. - wp table: -0,5 - +0,5 ° stroke range: 250-1.500 DH/min centre distance table/shaping spindle: -15 bis +170 mm max. stroke length: 55 mm max. helix angle: 45 max. tool diameter: 180 mm feeds:: feed rotation axis of workpiece (100 mm wp diam.): mm/min feed rotation axis of work piece (100 mm wp. diam.: 10-15.700 mm/min feed center axis of machine column: 1 - 3.750 mm/min : 23 kw voltage: 400 V operating frequency: 50 Hz control voltage: 24 V DC total power requirement: kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,2 x 2,6 x 2,6 m equipment · stroke positioning adjustment controlled by CNC · stroke length adjustment mechanical-manually · machine is fixed to the ground with specific damping shoes (part of the delivery scope) · oil m ...

최대 휠 직경: 180 mm 기어 폭: 45 mm 최대 모듈: 4 최소 모듈: 0,5 최대 스트로크 길이: 0 - 52 mm 스핀들 테이퍼: INNEN MK 4 테이블 직경: 160 mm 테이블 보어 직경: 75 mm 스트로크 수: 355 - 630 허브/분 이송 범위: 0,008 - 0,4 mm /허브 기계 크기 ca.: 2,30 x 1,50 x 2,36 m 전원 용량: 기계의 6kW 무게 ca.: 2.500kg

max. wheel diameter: 180 mm gear width: 45 mm max. module: 4 min. module: 0,5 stroke length max.: 0 - 52 mm spindle taper: innen MK 4 table diameter: 160 mm table bore diameter: 75 mm no. of strokes: 355 - 630 Hub/min feed range: 0,008 - 0,4 mm/Hub dimensions of the machine ca.: 2,30 x 1,50 x 2,36 m power capacity: 6 kW weight of the machine ca.: 2.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 420 mm gear width: 120 mm max. module: 8 min. module: 0,5 control: BWO CNC no. of strokes: 32-800 Hub/min total power requirement: 50 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 5,3 x 3,9 x 3,4 m Machines increase 100 mm intermediate plate automatic Hublageverstellung automatic Hublängeverstellung 5 axis controlled machine BWO last type C, D, X, Z, L axes are CNC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

페이스 플레이트 직경 : 700 mm 내경 : 105 mm 무게 : 450 kg 높이 : 340 mm

페이스 플레이트 직경 : 1000 mm 내경 : 400/90 mm 무게 : 285 kg

금액 : 1 Holzkiste Reishauer UL 1800 변경 기어, 나무 케이스에서!

최대 램 스트로크: 230 mm 목: 230 mm 테이블 직경: 0 mm 제공됩니다 : Lorenz 기어 성형기 용 성형 스핀들 2 개 LS 630 - LS 1250 유형 1x 정밀 검사 새 1x는 정밀 검사가 필요합니다.

최대 휠 직경: 300/400mm 기어 폭: 70mm 최대 모듈: 6 분 모듈: 0.5 총 전력 요구 사항: 50kVA 기계 무게 ca.: 7,4 t

최대 휠 직경: --- mm 기어 폭: --- mm 최대 모듈: --- 최소 모듈: --- 총 전력 요구 사항: --- kW 기계의 무게 ca.: --- t 기계의 치수 ca.: --- m

ストレートガイド, 3顎プレート, チェンジホイール / ストレートガイド, 3-ジョープレート, ギアチェンジ, ハイ: 1100 mm, ロング: 1800 mm, 幅: 2300 mm, モジュール: 5, 重量: 5.000 Kg, 電圧: 220 / 380V, テーブル: 310 mm, スピンドル: 78 mm, 総出力: 3 Kw, Maxi.ストローク: 75 mm, 最大ギア: 500 mm, 切削速度: 18, 穴テーブル: 125 mm, 最大内側: 450 mm, 最大外部彫刻: 500 mm, ストローク/最小カッター数: 45/424

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: SYNTEC 200TB (NEW 2019) Technical data Working range: Module from: 1 up to: 5 Max. wheel diameter: 250 mm Max. gear cutting width: 70 mm Table diameter: 320 mm Drill diameter of the table: 125 mm Max. ram stroke: 100 mm Distance ram to table: from: 190 mm up to: 290 mm Taper in ram: 40 ISO Ram stroke speeds: from: 100 s/min up to: 1200 s/min Voltage 50 Hz 3x: 380 Volt Drive: 36 kW Machine´s weight about: 10000 kg Overall dimensions machine: Length: 4500 mm Width: 3200 mm Height: 2900 mm Equipment: Retrofited control: 2019 Helical gearing Mise en conformité CE

シート厚さ:0 mm ローラー幅:0 mm ロール数:0 ローラー直径: 0 mm 技術データ デコイラー: 内コイル直径:460~520 mm 外コイル直径:1900 mm 最大コイル重量:7500 kg バンド厚最大:620 mm コイル矯正機:ロール数:9 ロール径:50 mm 最大帯域幅:620 mm シート厚: から: 0.6 mm まで: 6.5 mm

Length: 0 mm Module: 0 mm Width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Working range: Module from: 0.5 up to: 6 Max. wheel diameter: 400 mm Max. gear cutting width: 70 mm Max. gear cutting diameter: 400 mm Min. ram stroke: 0 mm Max. ram stroke: 82 mm Adjustment of stroke position: 100 mm Distance ram to table: from: 265 mm up to: 365 mm Taper in ram: 5 MT Ram stroke speeds: from: 118 s/min up to: 1000 s/min Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 6300 kg Overall dimensions machine: Length: 2570 mm Width: 1320 mm Height: 2200 mm

Length: 0 mm Module: 0 mm Width: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 49903 Technical data Working range: Module from up to: 8 Toothed racks: Max. length to be shaped: 1850 mm Max. width to be shaped: 160 mm Table surface: Length: 2200 mm Width: 360 mm Max. ram stroke: 180 mm Distance ram to table: from: 55 mm up to: 280 mm Taper in ram: 50 ISO Ram stroke speeds: number (steps): 12 from: 26 s/min up to: 237 s/min Voltage 50 Hz 3x: 380 Volt Drive: 8.76 kW Machine´s weight about: 7100 kg Overall dimensions machine: Length: 5200 mm Width: 2300 mm Height: 2340 mm Description: gears are missing