휠 직경 - 최대 300mm 스핀들 속도 250 - 2800 rpm 최소 이송/최대 45/125mm 모듈 8 테이퍼 스핀들 ISO 40 부분 헤드 각도 110º 총 전력 요구 사항 3kW 기계 중량 약 1.5 t 공간 요구 사항 약. 1.5 x 1.4 x 1.9m
diameter:500 mm workpiece weight:30 kg test dia. min.:200 mm total power requirement:0,03 kW weight of the machine ca.:1000 kg dimensions of the machine ca.:1x0,5x1,06 m
Description: for workpiece clamping on lathes, grinding machines and dividing heads with high concentricity and holding force, for workpiece clamping (bar or chuck work) in conventional single-spindle lathes and CNC lathes directly in the spindle or in the collet chuck, smooth bores are mainly used in the counter spindle of CNC lathes . - including accessories according to pictures, quantity= 49 PCS weight approx.: 10 kg, Approx. Onsite Dimension. (l x w x h): 350 x 220 x 250 mm
groove width: 16 mm x-travel: 16-200 mm table length: 1500 mm table width: 375 mm milling spindle: ISO 40 max. clampable toolpiece shaft diameter: 30 mm max. useable hobs, normal diameter: 40 mm distance between milling spindle and table: 150-250 mm axial move. of milling spindle (auto./manual): 120 mm vertical adjust. of milling slide (manual): 100 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 2,00x1,40x2,40 m K4 - TECHDETAIL UK: 0,11 kW K4 - TECHDETAIL UK: 0,6/1,1 kW K4 - TECHDETAIL UK: 3 x 0,012-0,05 mm/U K4 - TECHDETAIL UK: 16x60 mm K4 - TECHDETAIL UK: 12 x 280 - 3550 U/min K4 - TECHDETAIL UK: 0,85 kW K4 - TECHDETAIL UK: 0-2,0 mm K4 - TECHDETAIL UK: 250 mm Condition: ready for production The machine is suitable for the manufacture of flutes and slots using undersize cutters with hydraulic adjustment. Roughing and finishing can be done in one single clamping. ...
휠 직경 - 최대 : 0 mm 치아 수 - 최대 : 0 모듈 - 최대 : 모듈 - 최소 : 총 전력 요구 사항 : kW 기계 무게 약 : t 공간 요구 사항 약 : m CNC 제어 동기화기 링 밀링 머신 동기화기 링에 이상적, BWO Ctrl 785 H 데이터 f & uuml,이 광고는 ModulMWS - LogoTech oHG의 기계 관리로 만들어졌습니다.
max. grinding diameter: 400 mm grinding width: 0 mm max. module: min. module: total power requirement: 3 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunat ...
max. wheel diameter: 280 mm max. number of teeth: 100 max. module: 6 min. module: 1 total power requirement: 6 kW weight of the machine ca.: 2500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 49 STK weight: 10 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. grinding diameter: 400 mm : 18010 shaving cutter - diameter: 64 - 320 mm indexing: schleifbar 1 -12 Modul shaving wheel width: max. 40 mm number of teeth: 13 - 240 roller bend diameter min./max.: 73 - 320 mm slide speeds: 5-20-30-40 Zähne/min. max. dia. of grinding wheel: 762 mm grinding wheel - swivable: 5-21 ° grinding slide swivable +/-: 2 x 35 ° total power requirement: 3 kW weight of the machine ca.: 4,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
チップ遠心分離機、シェーバー用速度可変器、2点小 型用1油圧、最大550mm /遠心分離機チップ用別のマニュアル、シェーバー用 可変速度、小型用2点または1油圧、最大550mm用マニュ アル、高:2200 mm、ロング:1650 mm、幅:1450 mm、モジュール:8、重量:6,500 Kg、電圧:220/380 W、 総出力: 6.5 Kw, カッター ø 最大 / 最小: 260/180 mm, カッター長さ最大/最小: 30/20 mm, 最大長さワーク: 250 mm, 最大/最小ワーク: 550/20 mm, 仕様: ユニバーサ